ir245_sysctl-2.diff :
-------------------
o [CORRECT] Check min/max boundary on various sysctl
o [FEATURE] Add min_tx_turn_time sysctl and make it default to 10
This fixes problem with some broken cellular phones
o [FEATURE] Simplify retry_count tests
o [FEATURE] Allow to set the "no activity" event timeout via sysctl
o [FEATURE] "no activity" event generated each multiple of timeout
and not only the first time. This allow apps to know is connectivity
is restored (they don't receive anymore the event).
diff -u -p linux/net/irda/irsysctl.d3.c linux/net/irda/irsysctl.c
--- linux/net/irda/irsysctl.d3.c Mon Nov 19 17:25:26 2001
+++ linux/net/irda/irsysctl.c Tue Nov 20 11:25:46 2001
@@ -10,6 +10,7 @@
* Modified by: Dag Brattli <dagb@cs.uit.no>
*
* Copyright (c) 1997, 1999 Dag Brattli, All Rights Reserved.
+ * Copyright (c) 2000-2001 Jean Tourrilhes <jt@hpl.hp.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
@@ -32,24 +33,47 @@
#include <net/irda/irias_object.h>
#define NET_IRDA 412 /* Random number */
-enum { DISCOVERY=1, DEVNAME, DEBUG, SLOTS, DISCOVERY_TIMEOUT,
- SLOT_TIMEOUT, MAX_BAUD_RATE, MAX_INACTIVE_TIME, LAP_KEEPALIVE_TIME, };
+enum { DISCOVERY=1, DEVNAME, DEBUG, FAST_POLL, DISCOVERY_SLOTS,
+ DISCOVERY_TIMEOUT, SLOT_TIMEOUT, MAX_BAUD_RATE, MIN_TX_TURN_TIME,
+ MAX_NOREPLY_TIME, WARN_NOREPLY_TIME, LAP_KEEPALIVE_TIME };
extern int sysctl_discovery;
extern int sysctl_discovery_slots;
extern int sysctl_discovery_timeout;
-extern int sysctl_slot_timeout;
+extern int sysctl_slot_timeout; /* Candidate */
extern int sysctl_fast_poll_increase;
int sysctl_compression = 0;
extern char sysctl_devname[];
extern int sysctl_max_baud_rate;
-extern int sysctl_max_inactive_time;
+extern int sysctl_min_tx_turn_time;
+extern int sysctl_max_noreply_time;
+extern int sysctl_warn_noreply_time;
extern int sysctl_lap_keepalive_time;
#ifdef CONFIG_IRDA_DEBUG
extern unsigned int irda_debug;
#endif
+/* this is needed for the proc_dointvec_minmax - Jean II */
+static int max_discovery_slots = 16; /* ??? */
+static int min_discovery_slots = 1;
+/* IrLAP 6.13.2 says 25ms to 10+70ms - allow higher since some devices
+ * seems to require it. (from Dag's comment) */
+static int max_slot_timeout = 160;
+static int min_slot_timeout = 20;
+static int max_max_baud_rate = 16000000; /* See qos.c - IrLAP spec */
+static int min_max_baud_rate = 2400;
+static int max_min_tx_turn_time = 10000; /* See qos.c - IrLAP spec */
+static int min_min_tx_turn_time = 0;
+static int max_max_noreply_time = 40; /* See qos.c - IrLAP spec */
+static int min_max_noreply_time = 3;
+static int max_warn_noreply_time = 3; /* 3s == standard */
+static int min_warn_noreply_time = 1; /* 1s == min WD_TIMER */
+static int max_lap_keepalive_time = 10000; /* 10s */
+static int min_lap_keepalive_time = 100; /* 100us */
+/* For other sysctl, I've no idea of the range. Maybe Dag could help
+ * us on that - Jean II */
+
static int do_devname(ctl_table *table, int write, struct file *filp,
void *buffer, size_t *lenp)
{
@@ -77,21 +101,32 @@ static ctl_table irda_table[] = {
sizeof(int), 0644, NULL, &proc_dointvec },
#endif
#ifdef CONFIG_IRDA_FAST_RR
- { SLOTS, "fast_poll_increase", &sysctl_fast_poll_increase,
+ { FAST_POLL, "fast_poll_increase", &sysctl_fast_poll_increase,
sizeof(int), 0644, NULL, &proc_dointvec },
#endif
- { SLOTS, "discovery_slots", &sysctl_discovery_slots,
- sizeof(int), 0644, NULL, &proc_dointvec },
+ { DISCOVERY_SLOTS, "discovery_slots", &sysctl_discovery_slots,
+ sizeof(int), 0644, NULL, &proc_dointvec_minmax, &sysctl_intvec,
+ NULL, &min_discovery_slots, &max_discovery_slots },
{ DISCOVERY_TIMEOUT, "discovery_timeout", &sysctl_discovery_timeout,
sizeof(int), 0644, NULL, &proc_dointvec },
{ SLOT_TIMEOUT, "slot_timeout", &sysctl_slot_timeout,
- sizeof(int), 0644, NULL, &proc_dointvec },
+ sizeof(int), 0644, NULL, &proc_dointvec_minmax, &sysctl_intvec,
+ NULL, &min_slot_timeout, &max_slot_timeout },
{ MAX_BAUD_RATE, "max_baud_rate", &sysctl_max_baud_rate,
- sizeof(int), 0644, NULL, &proc_dointvec },
- { MAX_INACTIVE_TIME, "max_inactive_time", &sysctl_max_inactive_time,
- sizeof(int), 0644, NULL, &proc_dointvec },
+ sizeof(int), 0644, NULL, &proc_dointvec_minmax, &sysctl_intvec,
+ NULL, &min_max_baud_rate, &max_max_baud_rate },
+ { MIN_TX_TURN_TIME, "min_tx_turn_time", &sysctl_min_tx_turn_time,
+ sizeof(int), 0644, NULL, &proc_dointvec_minmax, &sysctl_intvec,
+ NULL, &min_min_tx_turn_time, &max_min_tx_turn_time },
+ { MAX_NOREPLY_TIME, "max_noreply_time", &sysctl_max_noreply_time,
+ sizeof(int), 0644, NULL, &proc_dointvec_minmax, &sysctl_intvec,
+ NULL, &min_max_noreply_time, &max_max_noreply_time },
+ { WARN_NOREPLY_TIME, "warn_noreply_time", &sysctl_warn_noreply_time,
+ sizeof(int), 0644, NULL, &proc_dointvec_minmax, &sysctl_intvec,
+ NULL, &min_warn_noreply_time, &max_warn_noreply_time },
{ LAP_KEEPALIVE_TIME, "lap_keepalive_time", &sysctl_lap_keepalive_time,
- sizeof(int), 0644, NULL, &proc_dointvec },
+ sizeof(int), 0644, NULL, &proc_dointvec_minmax, &sysctl_intvec,
+ NULL, &min_lap_keepalive_time, &max_lap_keepalive_time },
{ 0 }
};
diff -u -p linux/net/irda/qos.d3.c linux/net/irda/qos.c
--- linux/net/irda/qos.d3.c Mon Nov 19 17:28:39 2001
+++ linux/net/irda/qos.c Mon Nov 19 19:14:50 2001
@@ -51,7 +51,16 @@ int sysctl_max_baud_rate = 16000000;
* may want to keep the LAP alive longuer or shorter in case of link failure.
* Remember that the threshold time (early warning) is fixed to 3s...
*/
-int sysctl_max_inactive_time = 12;
+int sysctl_max_noreply_time = 12;
+/*
+ * Minimum turn time to be applied before transmitting to the peer.
+ * Nonzero values (usec) are used as lower limit to the per-connection
+ * mtt value which was announced by the other end during negotiation.
+ * Might be helpful if the peer device provides too short mtt.
+ * Default is 10 which means using the unmodified value given by the peer
+ * except if it's 0 (0 is likely a bug in the other stack).
+ */
+unsigned sysctl_min_tx_turn_time = 10;
static int irlap_param_baud_rate(void *instance, irda_param_t *param, int get);
static int irlap_param_link_disconnect(void *instance, irda_param_t *parm,
@@ -184,7 +193,6 @@ static inline __u32 byte_value(__u8 byte
* Function value_lower_bits (value, array)
*
* Returns a bit field marking all possibility lower than value.
- * We may need a "value_higher_bits" in the future...
*/
static inline int value_lower_bits(__u32 value, __u32 *array, int size, __u16 *field)
{
@@ -207,6 +215,33 @@ static inline int value_lower_bits(__u32
return i;
}
+/*
+ * Function value_highest_bit (value, array)
+ *
+ * Returns a bit field marking the highest possibility lower than value.
+ */
+static inline int value_highest_bit(__u32 value, __u32 *array, int size, __u16 *field)
+{
+ int i;
+ __u16 mask = 0x1;
+ __u16 result = 0x0;
+
+ for (i=0; i < size; i++) {
+ /* Finished ? */
+ if (array[i] <= value)
+ break;
+ /* Shift mask */
+ mask <<= 1;
+ }
+ /* Set the current value to the bit field */
+ result |= mask;
+ /* Send back a valid index */
+ if(i >= size)
+ i = size - 1; /* Last item */
+ *field = result;
+ return i;
+}
+
/* -------------------------- MAIN CALLS -------------------------- */
/*
@@ -254,9 +289,9 @@ void irda_init_max_qos_capabilies(struct
sysctl_max_baud_rate = index_value(i, baud_rates);
/* Set configured max disc time */
- i = value_lower_bits(sysctl_max_inactive_time, link_disc_times, 8,
+ i = value_lower_bits(sysctl_max_noreply_time, link_disc_times, 8,
&qos->link_disc_time.bits);
- sysctl_max_inactive_time = index_value(i, link_disc_times);
+ sysctl_max_noreply_time = index_value(i, link_disc_times);
/* LSB is first byte, MSB is second byte */
qos->baud_rate.bits &= 0x03ff;
@@ -281,6 +316,19 @@ void irlap_adjust_qos_settings(struct qo
int index;
IRDA_DEBUG(2, __FUNCTION__ "()\n");
+
+ /*
+ * Make sure the mintt is sensible.
+ */
+ if (sysctl_min_tx_turn_time > qos->min_turn_time.value) {
+ int i;
+
+ /* We don't really need bits, but easier this way */
+ i = value_highest_bit(sysctl_min_tx_turn_time, min_turn_times,
+ 8, &qos->min_turn_time.bits);
+ sysctl_min_tx_turn_time = index_value(i, min_turn_times);
+ qos->min_turn_time.value = sysctl_min_tx_turn_time;
+ }
/*
* Not allowed to use a max turn time less than 500 ms if the baudrate
diff -u -p linux/net/irda/irlap.d3.c linux/net/irda/irlap.c
--- linux/net/irda/irlap.d3.c Mon Nov 19 17:24:34 2001
+++ linux/net/irda/irlap.c Tue Nov 20 11:26:54 2001
@@ -51,6 +51,11 @@
hashbin_t *irlap = NULL;
int sysctl_slot_timeout = SLOT_TIMEOUT * 1000 / HZ;
+/* This is the delay of missed pf period before generating an event
+ * to the application. The spec mandate 3 seconds, but in some cases
+ * it's way too long. - Jean II */
+int sysctl_warn_noreply_time = 3;
+
extern void irlap_queue_xmit(struct irlap_cb *self, struct sk_buff *skb);
static void __irlap_close(struct irlap_cb *self);
@@ -527,22 +532,7 @@ void irlap_discovery_request(struct irla
self->discovery_cmd = discovery;
info.discovery = discovery;
- /* Check if the slot timeout is within limits */
- if (sysctl_slot_timeout < 20) {
- ERROR(__FUNCTION__
- "(), to low value for slot timeout!\n");
- sysctl_slot_timeout = 20;
- }
- /*
- * Highest value is actually 8, but we allow higher since
- * some devices seems to require it.
- */
- if (sysctl_slot_timeout > 160) {
- ERROR(__FUNCTION__
- "(), to high value for slot timeout!\n");
- sysctl_slot_timeout = 160;
- }
-
+ /* sysctl_slot_timeout bounds are checked in irsysctl.c - Jean II */
self->slot_timeout = sysctl_slot_timeout * HZ / 1000;
irlap_do_event(self, DISCOVERY_REQUEST, NULL, &info);
@@ -931,9 +921,6 @@ void irlap_init_qos_capabilities(struct
/* Set data size */
/*self->qos_rx.data_size.bits &= 0x03;*/
- /* Set disconnect time -> done properly in qos.c */
- /*self->qos_rx.link_disc_time.bits &= 0x07;*/
-
irda_qos_bits_to_value(&self->qos_rx);
}
@@ -1070,8 +1057,11 @@ void irlap_apply_connection_parameters(s
/*
* Set N1 to 0 if Link Disconnect/Threshold Time = 3 and set it to
* 3 seconds otherwise. See page 71 in IrLAP for more details.
+ * Actually, it's not always 3 seconds, as we allow to set
+ * it via sysctl... Max maxtt is 500ms, and N1 need to be multiple
+ * of 2, so 1 second is minimum we can allow. - Jean II
*/
- if (self->qos_tx.link_disc_time.value == 3)
+ if (self->qos_tx.link_disc_time.value == sysctl_warn_noreply_time)
/*
* If we set N1 to 0, it will trigger immediately, which is
* not what we want. What we really want is to disable it,
@@ -1079,7 +1069,8 @@ void irlap_apply_connection_parameters(s
*/
self->N1 = -2; /* Disable - Need to be multiple of 2*/
else
- self->N1 = 3000 / self->qos_rx.max_turn_time.value;
+ self->N1 = sysctl_warn_noreply_time * 1000 /
+ self->qos_rx.max_turn_time.value;
IRDA_DEBUG(4, "Setting N1 = %d\n", self->N1);
diff -u -p linux/net/irda/irlap_event.d3.c linux/net/irda/irlap_event.c
--- linux/net/irda/irlap_event.d3.c Mon Nov 19 17:11:42 2001
+++ linux/net/irda/irlap_event.c Tue Nov 27 16:35:15 2001
@@ -1405,30 +1405,29 @@ static int irlap_state_nrm_p(struct irla
}
self->add_wait = FALSE;
- if ((self->retry_count < self->N2) &&
- (self->retry_count != self->N1)) {
-
+ /* N2 is the disconnect timer. Until we reach it, we retry */
+ if (self->retry_count < self->N2) {
+ /* Retry sending the pf bit to the secondary */
irlap_wait_min_turn_around(self, &self->qos_tx);
irlap_send_rr_frame(self, CMD_FRAME);
irlap_start_final_timer(self, self->final_timeout);
self->retry_count++;
-
IRDA_DEBUG(4, "irlap_state_nrm_p: FINAL_TIMER_EXPIRED:"
" retry_count=%d\n", self->retry_count);
- /* Keep state */
- } else if (self->retry_count == self->N1) {
- irlap_status_indication(self, STATUS_NO_ACTIVITY);
- irlap_wait_min_turn_around(self, &self->qos_tx);
- irlap_send_rr_frame(self, CMD_FRAME);
-
- irlap_start_final_timer(self, self->final_timeout);
- self->retry_count++;
- IRDA_DEBUG(4, "retry count = N1; retry_count=%d\n",
- self->retry_count);
+ /* Early warning event. I'm using a pretty liberal
+ * interpretation of the spec and generate an event
+ * every time the timer is multiple of N1 (and not
+ * only the first time). This allow application
+ * to know precisely if connectivity restart...
+ * Jean II */
+ if((self->retry_count % self->N1) == 0)
+ irlap_status_indication(self,
+ STATUS_NO_ACTIVITY);
+
/* Keep state */
- } else if (self->retry_count >= self->N2) {
+ } else {
irlap_apply_default_connection_parameters(self);
/* Always switch state before calling upper layers */
@@ -1991,6 +1990,7 @@ static int irlap_state_nrm_s(struct irla
* Wait until retry_count * n matches negotiated threshold/
* disconnect time (note 2 in IrLAP p. 82)
*
+ * Similar to irlap_state_nrm_p() -> FINAL_TIMER_EXPIRED
* Note : self->wd_timeout = (self->final_timeout * 2),
* which explain why we use (self->N2 / 2) here !!!
* Jean II
@@ -1998,16 +1998,15 @@ static int irlap_state_nrm_s(struct irla
IRDA_DEBUG(1, __FUNCTION__ "(), retry_count = %d\n",
self->retry_count);
- if ((self->retry_count < (self->N2 / 2)) &&
- (self->retry_count != (self->N1 / 2))) {
-
+ if (self->retry_count < (self->N2 / 2)) {
+ /* No retry, just wait for primary */
irlap_start_wd_timer(self, self->wd_timeout);
self->retry_count++;
- } else if (self->retry_count == (self->N1 / 2)) {
- irlap_status_indication(self, STATUS_NO_ACTIVITY);
- irlap_start_wd_timer(self, self->wd_timeout);
- self->retry_count++;
- } else if (self->retry_count >= (self->N2 / 2)) {
+
+ if((self->retry_count % (self->N1 / 2)) == 0)
+ irlap_status_indication(self,
+ STATUS_NO_ACTIVITY);
+ } else {
irlap_apply_default_connection_parameters(self);
/* Always switch state before calling upper layers */
diff -u -p linux/net/irda/irlmp_event.d3.c linux/net/irda/irlmp_event.c
--- linux/net/irda/irlmp_event.d3.c Tue Nov 20 11:22:32 2001
+++ linux/net/irda/irlmp_event.c Tue Nov 20 11:25:14 2001
@@ -407,12 +407,7 @@ static void irlmp_state_active(struct la
* removed later and moved to the list of unconnected LSAPs
*/
if (HASHBIN_GET_SIZE(self->lsaps) > 0) {
- /* Make sure the timer has sensible value (the user
- * may have set it) - Jean II */
- if(sysctl_lap_keepalive_time < 100) /* 100ms */
- sysctl_lap_keepalive_time = 100;
- if(sysctl_lap_keepalive_time > 10000) /* 10s */
- sysctl_lap_keepalive_time = 10000;
+ /* Timer value is checked in irsysctl - Jean II */
irlmp_start_idle_timer(self, sysctl_lap_keepalive_time * HZ / 1000);
} else {
/* No more connections, so close IrLAP */
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Fri Nov 30 2001 - 21:00:40 EST