Re: UDMA problem with Maxtor 7200rpm disk

From: Jean-Francois Levesque (jfl@jfworld.net)
Date: Wed Dec 19 2001 - 21:43:41 EST


I tried the 2.4.17-rc2 kernel and I was able to boot. (but I'm not with 2.4.9, 2.4.12-ac5 and 2.4.16)

Unfortunately, when I try hdparm -d1 /dev/hda, I get the same errors

hda: timeout waiting for DMA
ide_dmaproc: chipset supported ide_dma_timeout func only: 14
hda: irq timeout: status=0x58 { DriveReady SeekComplete DataRequest }
hda: timeout waiting for DMA
ide_dmaproc: chipset supported ide_dma_timeout func only: 14
hda: irq timeout: status=0x58 { DriveReady SeekComplete DataRequest }
hda: timeout waiting for DMA
ide_dmaproc: chipset supported ide_dma_timeout func only: 14
hda: irq timeout: status=0x58 { DriveReady SeekComplete DataRequest }
hda: timeout waiting for DMA
ide_dmaproc: chipset supported ide_dma_timeout func only: 14
hda: irq timeout: status=0x58 { DriveReady SeekComplete DataRequest }
hda: DMA disabled
ide0: reset: success

What can influence the DMA on the BIOS else than the disk configuration?

I always get this PCI bus warning :
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx

Maybe I have somthing wrong with PCI bus that change everything???

Jean-François

PS: I have the lastest asus BIOS update (1003).
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Sun Dec 23 2001 - 21:00:20 EST