On Thu, 20 Dec 2001, Pavel Machek wrote:
> > Cruel hack to route every link to irq 11 (may of course lock up your box)
> >
> > setpci -s 7.0 49.b=99
>
> Huh, this did the trick! Interrupts now arrive correctly to the
> soundcard. Recording is still broken, but that's probably separate
> problem. (I did not even need those two other setpci's ;-)
setpci -s 7.0 49.b=09 should do the trick as well, right?
Well, let me extend your dump_pirq with info from your ACPI DSDT (lines
starting with ==):
Device 00:0f.0 (slot 0):
Device 00:02.0 (slot 0):
INTA: link 0x59, irq mask 0x0800
== LNKU
Device 00:08.0 (slot 1):
INTA: link 0x49, irq mask 0x0020
== LNKC
Device 00:04.0 (slot 0):
INTA: link 0x48, irq mask 0x0800
== LNKA
INTB: link 0x48, irq mask 0x0800
== LNKB
Device 00:10.0 (slot 0):
INTA: link 0x48, irq mask 0x0800
== LNKB
Device 00:07.0 (slot 0):
INTA: link 0x48, irq mask 0xdef8
INTB: link 0x48, irq mask 0xdef8
INTC: link 0x49, irq mask 0xdef8
INTD: link 0x49, irq mask 0xdef8
== no ACPI info here
Device 00:01.0 (slot 0):
INTA: link 0x48, irq mask 0x0800
== no ACPI info here
Device 01:00.0 (slot 0):
INTA: link 0x48, irq mask 0x0800
== LNKA
Interrupt router at 00:07.0: AcerLabs Aladdin M1533 PCI-to-ISA bridge
INT1 (link 1): irq 11
INT2 (link 2): irq 11
INT3 (link 3): unrouted
INT4 (link 4): unrouted
INT5 (link 5): unrouted
INT6 (link 6): unrouted
INT7 (link 7): unrouted
INT8 (link 8): unrouted
Serial IRQ: [enabled] [continuous] [frame=21] [pulse=12]
== LNKA IPRS (0x48) 0x0298 [3,4,7,9]
== LNKB IPRS (0x48) 0x0298 [3,4,7,9]
== LNKC IPRC (0x49) 0x0280 [7,9]
== LNKD IPRS (0x49) 0x0298 [3,4,7,9]
== LNKU IPRU (0x74) 0x0020 [5]
Your PIRQ table is hopelessly broken. The kernel code expects the "link
0x.." field to contain numbers between 0 to 7, corresponding to INT1 to
INT8. Your link field seems to contain the config space offset instead,
but that's fundamentally broken, since one config space byte determines
the routing for two links, thus it's not possible to figure out which one
is meant.
Also, USB uses a special link which won't work with the current kernel
code at all. The possible IRQ masks are quite different between the PIRQ
table and the ACPI table. (And your BIOS seems to have set the USB
controller to IRQ 11, (USB->LNKU->IRQ11), which isn't even allowed
according to the IRQ mask).
So, there's basically no chance to get the IRQ routing code working
correctly with your PIRQ table. However, using the ACPI provided info
should work fine as far as I can see. Did you try the latest ACPI snapshot
+ my ACPI IRQ routing patch? It'd be interesting to see what that gives.
(it may even work ;-)
--Kai
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sun Dec 23 2001 - 21:00:24 EST