On Fri, Jan 11, 2002 at 08:58:43PM +0100, Krzysztof Oledzki wrote:
> Hello,
>
> I have just modified Andre Hedrick's ide.2.2.19.05042001 patch. You can
> find it at "http://www.ans.pl/ide/ide.2.2.21.05042001-Ole.patch.gz". It
> should patch 2.2.21pre2 kernel without any warnings/errors. I also
> bacported new VIA driver from 2.4.x kernel - this one uses correct IO port
> as via_base so values displayed in /proc/ide/via file are now properly
> calculated. Check the "BM-DMA base" value :)
>
> Hopefully, devices which work in DMA mode, have DMA/UDMA value instead of
> PIO in "Transfer Mode" now. It also should works better with some new
> chipsets. If I found time I can also try to backport new Intel, Promise
> and HPT drivers if no no one else is working on it. I believe I have
> required hardware to test it.
>
> I also have one question about IDE support in 2.4.x kernel. Why, with VIA
> MVP3 chipset on my FIC 503+ board, with UDMA33/66/100 HDDs using 2.4.x
> kernels I have only 13 MB/sec (tested with hdparm -t). With 2.2.x kernels
> hdparm shows 17 MB/sec but with IDE support bacported from 2.4.x kernels
> (2.2.19/2.2.20+original Andre Hedrick's patch) it is also 13 MB/sec.
If you can send me 'lspci -vvxxx' for both the cases, perhaps I'll be
able to find out why it is so. Is this with all the IDE patches or just
the VIA driver changed?
-- Vojtech Pavlik SuSE Labs - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Tue Jan 15 2002 - 21:00:36 EST