On Thu, 24 Jan 2002, Norbert Preining wrote:
> Hi Daniel!
>
> You wrote:
> > 2. enable generel-setup -> acpi , acpi-bus-maager , prozessor
> > in the kernel config
>
> Why is it necessary to activate acpi which makes apm not working,
> and therefor poweroff etc. acpi is long from working/stable and
> the support for various actions too are missing.
>
> >From the patch I do not see why it is specific to acpi?
>
> Best wishes
hi norbert!
ok ... i tested it:
patch activted:
apm activated -> prozessor idle calls : 42°C when idle
acpi activated -> prozessor c1/c2 states: 35°C when idle
under load:
apm activated -> 47°C kernel compiling after 2 min
acpi activated -> 43°C kernel compiling after 2 min
(kernel compiling only lasts about 3 min ... so no larger load intervalls
are avaible at the moment ... )
so ... you could use apm ... but acpi proofs to be better in power saveing
with the "disconnectenable when STPGNT detected" bit set ...
maybe apm is not working at all .. .cause at the moment i see that the
temperature does not drop at all after finishing the kernel ... it looks
like that the 42°C only where cause it was fresh rebooted from the acpi
power saving mode
daniel
# Daniel Nofftz
# Sysadmin CIP-Pool Informatik
# University of Trier(Germany), Room V 103
# Mail: daniel@nofftz.de
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Thu Jan 31 2002 - 21:00:20 EST