Primary purpose of this patch is to make KERN_WARNING and
KERN_INFO log levels closer to their original meaning.
Today they are quite far from what was intended.
Just look what kernel writes at the WARNING level
each time you boot your box!
Diff for some arch/i386/kernel/*.c files
-- vdadiff --recursive -u linux-2.4.13-orig/arch/i386/kernel/apic.c linux-2.4.13-new/arch/i386/kernel/apic.c --- linux-2.4.13-orig/arch/i386/kernel/apic.c Thu Oct 4 23:42:54 2001 +++ linux-2.4.13-new/arch/i386/kernel/apic.c Thu Nov 8 23:42:11 2001 @@ -362,10 +362,10 @@ value = apic_read(APIC_LVT0) & APIC_LVT_MASKED; if (!smp_processor_id() && (pic_mode || !value)) { value = APIC_DM_EXTINT; - printk("enabled ExtINT on CPU#%d\n", smp_processor_id()); + printk(KERN_INFO "Enabled ExtINT on CPU#%d\n", smp_processor_id()); } else { value = APIC_DM_EXTINT | APIC_LVT_MASKED; - printk("masked ExtINT on CPU#%d\n", smp_processor_id()); + printk(KERN_INFO "Masked ExtINT on CPU#%d\n", smp_processor_id()); } apic_write_around(APIC_LVT0, value); @@ -385,7 +385,7 @@ if (maxlvt > 3) /* Due to the Pentium erratum 3AP. */ apic_write(APIC_ESR, 0); value = apic_read(APIC_ESR); - printk("ESR value before enabling vector: %08lx\n", value); + printk(KERN_INFO "ESR value before enabling vector: %08lx\n", value); value = ERROR_APIC_VECTOR; // enables sending errors apic_write_around(APIC_LVTERR, value); @@ -395,7 +395,7 @@ if (maxlvt > 3) apic_write(APIC_ESR, 0); value = apic_read(APIC_ESR); - printk("ESR value after enabling vector: %08lx\n", value); + printk(KERN_INFO "ESR value after enabling vector: %08lx\n", value); } else { if (esr_disable) /* @@ -404,9 +404,9 @@ * ESR disabled - we can't do anything useful with the * errors anyway - mbligh */ - printk("Leaving ESR disabled.\n"); + printk(KERN_INFO "Leaving ESR disabled\n"); else - printk("No ESR for 82489DX.\n"); + printk(KERN_INFO "No ESR for 82489DX\n"); } if (nmi_watchdog == NMI_LOCAL_APIC) @@ -603,7 +603,7 @@ */ rdmsr(MSR_IA32_APICBASE, l, h); if (!(l & MSR_IA32_APICBASE_ENABLE)) { - printk("Local APIC disabled by BIOS -- reenabling.\n"); + printk(KERN_INFO "Local APIC disabled by BIOS -- reenabling\n"); l &= ~MSR_IA32_APICBASE_BASE; l |= MSR_IA32_APICBASE_ENABLE | APIC_DEFAULT_PHYS_BASE; wrmsr(MSR_IA32_APICBASE, l, h); @@ -616,7 +616,7 @@ */ features = cpuid_edx(1); if (!(features & (1 << X86_FEATURE_APIC))) { - printk("Could not enable APIC!\n"); + printk(KERN_WARNING "Could not enable APIC!\n"); return -1; } set_bit(X86_FEATURE_APIC, &boot_cpu_data.x86_capability); @@ -625,7 +625,7 @@ if (nmi_watchdog != NMI_NONE) nmi_watchdog = NMI_LOCAL_APIC; - printk("Found and enabled local APIC!\n"); + printk(KERN_INFO "Found and enabled local APIC\n"); if (needs_pm) apic_pm_init1(); @@ -633,7 +633,7 @@ return 0; no_apic: - printk("No local APIC present or hardware disabled\n"); + printk(KERN_INFO "No local APIC present or hardware disabled\n"); return -1; } @@ -787,7 +787,7 @@ */ slice = clocks / (smp_num_cpus+1); - printk("cpu: %d, clocks: %d, slice: %d\n", + printk(KERN_INFO "CPU: %d, clocks: %d, slice: %d\n", smp_processor_id(), clocks, slice); /* @@ -811,7 +811,7 @@ __setup_APIC_LVTT(clocks); - printk("CPU%d<T0:%d,T1:%d,D:%d,S:%d,C:%d>\n", + printk(KERN_INFO "CPU%d<T0:%d,T1:%d,D:%d,S:%d,C:%d>\n", smp_processor_id(), t0, t1, delta, slice, clocks); __restore_flags(flags); @@ -838,7 +838,7 @@ int i; const int LOOPS = HZ/10; - printk("calibrating APIC timer ...\n"); + printk(KERN_INFO "Calibrating APIC timer ...\n"); /* * Put whatever arbitrary (but long enough) timeout @@ -883,11 +883,11 @@ result = (tt1-tt2)*APIC_DIVISOR/LOOPS; if (cpu_has_tsc) - printk("..... CPU clock speed is %ld.%04ld MHz.\n", + printk(KERN_INFO "..... CPU clock speed is %ld.%04ld MHz\n", ((long)(t2-t1)/LOOPS)/(1000000/HZ), ((long)(t2-t1)/LOOPS)%(1000000/HZ)); - printk("..... host bus clock speed is %ld.%04ld MHz.\n", + printk(KERN_INFO "..... host bus clock speed is %ld.%04ld MHz\n", result/(1000000/HZ), result%(1000000/HZ)); @@ -898,7 +898,7 @@ void __init setup_APIC_clocks (void) { - printk("Using local APIC timer interrupts.\n"); + printk(KERN_INFO "Using local APIC timer interrupts\n"); using_apic_timer = 1; __cli(); diff --recursive -u linux-2.4.13-orig/arch/i386/kernel/io_apic.c linux-2.4.13-new/arch/i386/kernel/io_apic.c --- linux-2.4.13-orig/arch/i386/kernel/io_apic.c Thu Oct 4 23:42:54 2001 +++ linux-2.4.13-new/arch/i386/kernel/io_apic.c Thu Nov 8 23:42:11 2001 @@ -192,7 +192,7 @@ pirq_entries[i] = -1; pirqs_enabled = 1; - printk(KERN_INFO "PIRQ redirection, working around broken MP-BIOS.\n"); + printk(KERN_INFO "PIRQ redirection, working around broken MP-BIOS\n"); max = MAX_PIRQS; if (ints[0] < MAX_PIRQS) max = ints[0]; @@ -513,7 +513,7 @@ } default: { - printk(KERN_ERR "unknown bus type %d.\n",bus); + printk(KERN_ERR "unknown bus type %d\n",bus); irq = 0; break; } @@ -649,7 +649,7 @@ } if (!first_notcon) - printk(" not connected.\n"); + printk(" not connected\n"); } /* @@ -731,7 +731,6 @@ *(int *)®_02 = io_apic_read(apic, 2); spin_unlock_irqrestore(&ioapic_lock, flags); - printk("\n"); printk(KERN_DEBUG "IO APIC #%d......\n", mp_ioapics[apic].mpc_apicid); printk(KERN_DEBUG ".... register #00: %08X\n", *(int *)®_00); printk(KERN_DEBUG "....... : physical APIC id: %02X\n", reg_00.ID); @@ -771,7 +770,7 @@ printk(KERN_DEBUG ".... IRQ redirection table:\n"); printk(KERN_DEBUG " NR Log Phy Mask Trig IRR Pol" - " Stat Dest Deli Vect: \n"); + " Stat Dest Deli Vect:\n"); for (i = 0; i <= reg_01.entries; i++) { struct IO_APIC_route_entry entry; @@ -1047,12 +1046,13 @@ break; if (i >= 0xf) panic("Max APIC ID exceeded!\n"); - printk(KERN_ERR "... fixing up to %d. (tell your hw vendor)\n", - i); + printk(KERN_ERR "... fixing up to %d" + " (tell your hw vendor)\n",i); phys_id_present_map |= 1 << i; mp_ioapics[apic].mpc_apicid = i; } else { - printk("Setting %d in the phys_id_present_map\n", mp_ioapics[apic].mpc_apicid); + printk(KERN_INFO "Setting %d in the phys_id_present_map\n", + mp_ioapics[apic].mpc_apicid); phys_id_present_map |= 1 << mp_ioapics[apic].mpc_apicid; } @@ -1599,7 +1599,7 @@ enable_IO_APIC(); io_apic_irqs = ~PIC_IRQS; - printk("ENABLING IO-APIC IRQs\n"); + printk(KERN_INFO "Enabling IO-APIC IRQs\n"); /* * Set up the IO-APIC IRQ routing table by parsing the MP-BIOS diff --recursive -u linux-2.4.13-orig/arch/i386/kernel/mpparse.c linux-2.4.13-new/arch/i386/kernel/mpparse.c --- linux-2.4.13-orig/arch/i386/kernel/mpparse.c Thu Oct 4 23:42:54 2001 +++ linux-2.4.13-new/arch/i386/kernel/mpparse.c Thu Nov 8 23:42:50 2001 @@ -125,7 +125,7 @@ if (!(m->mpc_cpuflag & CPU_ENABLED)) return; - printk("Processor #%d %s APIC version %d\n", + printk(KERN_INFO "Processor #%d %s APIC version %d\n", m->mpc_apicid, mpc_family( (m->mpc_cpufeature & CPU_FAMILY_MASK)>>8 , (m->mpc_cpufeature & CPU_MODEL_MASK)>>4), @@ -186,7 +186,7 @@ num_processors++; if (m->mpc_apicid > MAX_APICS) { - printk("Processor #%d INVALID. (Max ID: %d).\n", + printk("Processor #%d INVALID. (Max ID: %d)\n", m->mpc_apicid, MAX_APICS); return; } @@ -202,7 +202,8 @@ * Validate version */ if (ver == 0x0) { - printk("BIOS bug, APIC version is 0 for CPU#%d! fixing up to 0x10. (tell your hw vendor)\n", m->mpc_apicid); + printk("BIOS bug, APIC version is 0 for CPU#%d!" + " fixing up to 0x10 (tell your hw vendor)\n", m->mpc_apicid); ver = 0x10; } apic_version[m->mpc_apicid] = ver; @@ -236,12 +237,12 @@ if (!(m->mpc_flags & MPC_APIC_USABLE)) return; - printk("I/O APIC #%d Version %d at 0x%lX.\n", + printk(KERN_INFO "I/O APIC #%d Version %d at 0x%lX\n", m->mpc_apicid, m->mpc_apicver, m->mpc_apicaddr); if (nr_ioapics >= MAX_IO_APICS) { - printk("Max # of I/O APICs (%d) exceeded (found %d).\n", + printk("Max # of I/O APICs (%d) exceeded (found %d)\n", MAX_IO_APICS, nr_ioapics); - panic("Recompile kernel with bigger MAX_IO_APICS!.\n"); + panic("Recompile kernel with bigger MAX_IO_APICS!\n"); } if (!m->mpc_apicaddr) { printk(KERN_ERR "WARNING: bogus zero I/O APIC address" @@ -319,7 +320,7 @@ } memcpy(str,mpc->mpc_oem,8); str[8]=0; - printk("OEM ID: %s ",str); + printk(KERN_INFO "OEM ID: %s ",str); memcpy(str,mpc->mpc_productid,12); str[12]=0; @@ -557,12 +558,12 @@ void __init get_smp_config (void) { struct intel_mp_floating *mpf = mpf_found; - printk("Intel MultiProcessor Specification v1.%d\n", mpf->mpf_specification); + printk(KERN_INFO "Intel MultiProcessor Specification v1.%d\n", mpf->mpf_specification); if (mpf->mpf_feature2 & (1<<7)) { - printk(" IMCR and PIC compatibility mode.\n"); + printk(KERN_INFO " IMCR and PIC compatibility mode.\n"); pic_mode = 1; } else { - printk(" Virtual Wire compatibility mode.\n"); + printk(KERN_INFO " Virtual Wire compatibility mode.\n"); pic_mode = 0; } @@ -607,7 +608,7 @@ } else BUG(); - printk("Processors: %d\n", num_processors); + printk(KERN_INFO "Processors: %d\n", num_processors); /* * Only use the first configuration found. */ diff --recursive -u linux-2.4.13-orig/arch/i386/kernel/mtrr.c linux-2.4.13-new/arch/i386/kernel/mtrr.c --- linux-2.4.13-orig/arch/i386/kernel/mtrr.c Mon Oct 15 18:43:24 2001 +++ linux-2.4.13-new/arch/i386/kernel/mtrr.c Thu Nov 8 23:42:11 2001 @@ -1066,12 +1066,12 @@ { if (!mask) return; if (mask & MTRR_CHANGE_MASK_FIXED) - printk ("mtrr: your CPUs had inconsistent fixed MTRR settings\n"); + printk (KERN_WARNING "mtrr: your CPUs had inconsistent fixed MTRR settings\n"); if (mask & MTRR_CHANGE_MASK_VARIABLE) - printk ("mtrr: your CPUs had inconsistent variable MTRR settings\n"); + printk (KERN_WARNING "mtrr: your CPUs had inconsistent variable MTRR settings\n"); if (mask & MTRR_CHANGE_MASK_DEFTYPE) - printk ("mtrr: your CPUs had inconsistent MTRRdefType settings\n"); - printk ("mtrr: probably your BIOS does not setup all CPUs\n"); + printk (KERN_WARNING "mtrr: your CPUs had inconsistent MTRRdefType settings\n"); + printk (KERN_WARNING "mtrr: probably your BIOS does not setup all CPUs\n"); } /* End Function mtrr_state_warn */ #endif /* CONFIG_SMP */ @@ -2170,9 +2170,9 @@ mtrr_if = MTRR_IF_NONE; } - printk ("mtrr: v%s Richard Gooch (rgooch@atnf.csiro.au)\n" - "mtrr: detected mtrr type: %s\n", - MTRR_VERSION, mtrr_if_name[mtrr_if]); + printk (KERN_INFO "mtrr: v" MTRR_VERSION " Richard Gooch (rgooch@atnf.csiro.au)\n" + KERN_INFO "mtrr: detected mtrr type: %s\n", + mtrr_if_name[mtrr_if]); return (mtrr_if != MTRR_IF_NONE); } /* End Function mtrr_setup */ @@ -2232,7 +2232,7 @@ break; default: /* I see no MTRRs I can support in SMP mode... */ - printk ("mtrr: SMP support incomplete for this vendor\n"); + printk (KERN_WARNING "mtrr: SMP support incomplete for this vendor\n"); } } /* End Function mtrr_init_secondary_cpu */ #endif /* CONFIG_SMP */ diff --recursive -u linux-2.4.13-orig/arch/i386/kernel/pci-pc.c linux-2.4.13-new/arch/i386/kernel/pci-pc.c --- linux-2.4.13-orig/arch/i386/kernel/pci-pc.c Tue Oct 9 21:17:38 2001 +++ linux-2.4.13-new/arch/i386/kernel/pci-pc.c Thu Nov 8 23:42:11 2001 @@ -347,7 +347,7 @@ pci_sanity_check(&pci_direct_conf1)) { outl (tmp, 0xCF8); __restore_flags(flags); - printk("PCI: Using configuration type 1\n"); + printk(KERN_INFO "PCI: Using configuration type 1\n"); request_region(0xCF8, 8, "PCI conf1"); return &pci_direct_conf1; } @@ -364,7 +364,7 @@ if (inb (0xCF8) == 0x00 && inb (0xCFA) == 0x00 && pci_sanity_check(&pci_direct_conf2)) { __restore_flags(flags); - printk("PCI: Using configuration type 2\n"); + printk(KERN_INFO "PCI: Using configuration type 2\n"); request_region(0xCF8, 4, "PCI conf2"); return &pci_direct_conf2; } @@ -472,10 +472,10 @@ case 0: return address + entry; case 0x80: /* Not present */ - printk("bios32_service(0x%lx): not present\n", service); + printk(KERN_WARNING "bios32_service(0x%lx): not present\n", service); return 0; default: /* Shouldn't happen */ - printk("bios32_service(0x%lx): returned 0x%x -- BIOS bug!\n", + printk(KERN_WARNING "bios32_service(0x%lx): returned 0x%x -- BIOS bug!\n", service, return_code); return 0; } @@ -525,7 +525,7 @@ status, signature); return 0; } - printk("PCI: PCI BIOS revision %x.%02x entry at 0x%lx, last bus=%d\n", + printk(KERN_INFO "PCI: PCI BIOS revision %x.%02x entry at 0x%lx, last bus=%d\n", major_ver, minor_ver, pcibios_entry, pcibios_last_bus); #ifdef CONFIG_PCI_DIRECT if (!(hw_mech & PCIBIOS_HW_TYPE1)) @@ -773,13 +773,13 @@ if (sum != 0) continue; if (check->fields.revision != 0) { - printk("PCI: unsupported BIOS32 revision %d at 0x%p, report to <mj@suse.cz>\n", + printk(KERN_WARNING "PCI: unsupported BIOS32 revision %d at 0x%p, report to <mj@suse.cz>\n", check->fields.revision, check); continue; } DBG("PCI: BIOS32 Service Directory structure at 0x%p\n", check); if (check->fields.entry >= 0x100000) { - printk("PCI: BIOS32 entry (0x%p) in high memory, cannot use.\n", check); + printk(KERN_WARNING "PCI: BIOS32 entry (0x%p) in high memory, cannot use\n", check); return NULL; } else { unsigned long bios32_entry = check->fields.entry; @@ -827,7 +827,7 @@ } } if (ln == &pci_devices) { - printk("PCI: BIOS reporting unknown device %02x:%02x\n", bus, devfn); + printk(KERN_WARNING "PCI: BIOS reporting unknown device %02x:%02x\n", bus, devfn); /* * We must not continue scanning as several buggy BIOSes * return garbage after the last device. Grr. @@ -836,7 +836,7 @@ } } if (!found) { - printk("PCI: Device %02x:%02x not found by BIOS\n", + printk(KERN_WARNING "PCI: Device %02x:%02x not found by BIOS\n", dev->bus->number, dev->devfn); list_del(&dev->global_list); list_add_tail(&dev->global_list, &sorted_devices); @@ -896,7 +896,7 @@ rt->size = opt.size + sizeof(struct irq_routing_table); rt->exclusive_irqs = map; memcpy(rt->slots, (void *) page, opt.size); - printk("PCI: Using BIOS Interrupt Routing Table\n"); + printk(KERN_INFO "PCI: Using BIOS Interrupt Routing Table\n"); } } free_page(page); @@ -961,7 +961,7 @@ } if (!seen_host_bridge) return; - printk("PCI: Ignoring ghost devices on bus %02x\n", b->number); + printk(KERN_WARNING "PCI: Ignoring ghost devices on bus %02x\n", b->number); ln = &b->devices; while (ln->next != &b->devices) { @@ -999,7 +999,7 @@ if (!pci_read_config_word(&dev, PCI_VENDOR_ID, &l) && l != 0x0000 && l != 0xffff) { DBG("Found device at %02x:%02x [%04x]\n", n, dev.devfn, l); - printk("PCI: Discovered peer bus %02x\n", n); + printk(KERN_INFO "PCI: Discovered peer bus %02x\n", n); pci_scan_bus(n, pci_root_ops, NULL); break; } @@ -1017,7 +1017,7 @@ */ int pxb, reg; u8 busno, suba, subb; - printk("PCI: Searching for i450NX host bridges on %s\n", d->slot_name); + printk(KERN_INFO "PCI: Searching for i450NX host bridges on %s\n", d->slot_name); reg = 0xd0; for(pxb=0; pxb<2; pxb++) { pci_read_config_byte(d, reg++, &busno); @@ -1040,7 +1040,7 @@ */ u8 busno; pci_read_config_byte(d, 0x4a, &busno); - printk("PCI: i440KX/GX host bridge %s: secondary bus %02x\n", d->slot_name, busno); + printk(KERN_INFO "PCI: i440KX/GX host bridge %s: secondary bus %02x\n", d->slot_name, busno); pci_scan_bus(busno, pci_root_ops, NULL); pcibios_last_bus = -1; } @@ -1061,7 +1061,7 @@ busno2 = busno1; if (busno2 > pcibios_last_bus) { pcibios_last_bus = busno2; - printk("PCI: ServerWorks host bridge: last bus %02x\n", pcibios_last_bus); + printk(KERN_INFO "PCI: ServerWorks host bridge: last bus %02x\n", pcibios_last_bus); } } #endif @@ -1082,7 +1082,7 @@ busno2 = busno1; if (busno2 > pcibios_last_bus) { pcibios_last_bus = busno2; - printk("PCI: Compaq host bridge: last bus %02x\n", busno2); + printk(KERN_INFO "PCI: Compaq host bridge: last bus %02x\n", busno2); } } #endif @@ -1095,7 +1095,7 @@ */ int i; - printk("PCI: Fixing base address flags for device %s\n", d->slot_name); + printk(KERN_WARNING "PCI: Fixing base address flags for device %s\n", d->slot_name); for(i=0; i<4; i++) d->resource[i].flags |= PCI_BASE_ADDRESS_SPACE_IO; } @@ -1244,11 +1244,11 @@ if (!pci_root_ops) pcibios_config_init(); if (!pci_root_ops) { - printk("PCI: System does not support PCI\n"); + printk(KERN_WARNING "PCI: System does not support PCI\n"); return; } - printk("PCI: Probing PCI hardware\n"); + printk(KERN_INFO "PCI: Probing PCI hardware\n"); pci_root_bus = pci_scan_bus(0, pci_root_ops, NULL); pcibios_irq_init(); - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Thu Jan 31 2002 - 21:00:47 EST