Hallo,
I get these warnings/errors from my kernel. For my feeling it does
not really seem to slow down things a lot but maybe it helps for fixing
errors.
Feb 1 10:16:48 prester kernel: hda: status error: status=0x58 { DriveReady Seek
Feb 1 10:16:48 prester kernel: hda: drive not ready for command
Feb 1 10:16:48 prester kernel: task_out_intr: should not trigger
Feb 1 10:16:48 prester kernel: task_out_intr: should not trigger
and
Feb 1 15:13:55 prester kernel: hda: status timeout: status=0xd0 { Busy }
Feb 1 15:13:55 prester kernel: hda: drive not ready for command
Feb 1 15:13:55 prester kernel: ide0: reset: success
Just now I have experience some new errors, which do not directly seem to be
related to ide but seem strange to me as well. Hope it gives you some clue.
Feb 1 15:22:28 prester kernel: <ry sread (sector 0x5b1bea88) failed
Feb 1 15:22:28 prester kernel: attempt to access beyond end of device
Feb 1 15:22:28 prester kernel: 03:04: rw=0, want=764278084, limit=8377897
Feb 1 15:22:28 prester kernel: Directory sread (sector 0x5b1bea88) failed
Feb 1 15:22:28 prester kernel: attempt to access beyond end of device
Feb 1 15:22:28 prester kernel: 03:04: rw=0, want=764278084, limit=8377897
...
Feb 1 15:22:29 prester kernel: Directory sread (sector 0x7007faf) failed
Feb 1 15:22:29 prester last message repeated 15 times
Axel Siebenwirth
with the following setup:
* kernel 2.5.3
# ATA/IDE/MFM/RLL support
CONFIG_IDE=y
# IDE, ATA and ATAPI Block devices
CONFIG_BLK_DEV_IDE=y
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_BLK_DEV_IDECD=m
CONFIG_IDE_TASK_IOCTL=y
# IDE chipset support/bugfixes
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_IDEDMA_PCI_AUTO=y
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_IDEDMA_AUTO=y
CONFIG_BLK_DEV_IDE_MODES=y
name value min max mode
---- ----- --- --- ----
acoustic 0 0 254 rw
address 0 0 2 rw
bios_cyl 1826 0 65535 rw
bios_head 255 0 255 rw
bios_sect 63 0 63 rw
breada_readahead 8 0 255 rw
bswap 0 0 1 r
current_speed 0 0 69 rw
failures 0 0 65535 rw
file_readahead 124 0 16384 rw
ide_scsi 0 0 1 rw
init_speed 0 0 69 rw
io_32bit 0 0 3 rw
keepsettings 0 0 1 rw
lun 0 0 7 rw
max_failures 1 0 65535 rw
multcount 0 0 16 rw
nice1 1 0 1 rw
nowerr 0 0 1 rw
number 0 0 3 rw
pio_mode write-only 0 255 w
slow 0 0 1 rw
unmaskirq 0 0 1 rw
using_dma 0 0 1 rw
wcache 0 0 1 rw
ide-disk version 1.13
physical 29104/16/63
logical 1826/255/63
QUANTUM FIREBALLlct10 15
00:1f.1 IDE interface: Intel Corporation 82801AA IDE (rev 02) (prog-if 80
[Master])
Subsystem: Intel Corporation 82801AA IDE
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Region 4: I/O ports at f000 [size=16]
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Thu Feb 07 2002 - 21:00:14 EST