I have had a few random hangs with my machine since I added a maxtor 27
gig IDE drive to it. I kept trying different combinations of bus
positions etc. I figured it was flacky hardware or something. I added
the drive in the early 2.4 series. Recently I became slightly suspicious
of my Adaptec 2940U2W after reading all of the problems it had in the
early 2.4. So I upgraded the bios and got kernel 2.4.17. Though the
problem seems diminished it is certainly not gone...
Now for the kicker... I found a 99% guarenteed way to hard lock my
box. I tried ripping two cds at a time. One on the ide bus and one on
the scsi. Just a note the data is being stored to the maxtor 27 gig
mentioned above. The reason I point to the IDE + SCSI combo is that I can
do two scsi cdroms ripping to the maxtor and it works much more
reliably. I am under the impression that IDE CDROMs use the ide bus quite
heavily under ripping...
General notes:
Motherboard: Supermicro P6DBU w/onboard 2940U2W
CPU: Dual PII 350mhz
SCSI Bus: 0: IBM 9gig U2W, 1: IBM 4gig U2W, 2: Pioneer DVDROM (used for
ripping)
IDE BUS 0: Maxtor 27 gig
IDE BUS 1: Teac IDE CDRom
Also happens with Teac Slaved to Maxtor
Questions, Comments, Ideas?
Keith Baker
Email: Syzygy@pubnix.org
Life is a sexually transmitted disease with 100% mortality.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Thu Feb 07 2002 - 21:00:23 EST