2.4.17 Oops when trying to mount ATAPI CDROM

From: Manuel McLure (manuel@mclure.org)
Date: Sat Feb 02 2002 - 20:02:44 EST

Next message: Jeff Garzik: "Re: [PATCH] Generic HDLC patch for 2.5.3"
Previous message: Alan Cox: "Re: [PATCH] Generic HDLC patch for 2.5.3"
Next in thread: Andre Hedrick: "Re: 2.4.17 Oops when trying to mount ATAPI CDROM"
Reply: Andre Hedrick: "Re: 2.4.17 Oops when trying to mount ATAPI CDROM"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Motherboard: ASUS P55T2P4 motherboard (Intel 430HX chipset)
CPU: AMD K6-III 400MHz
CD-ROM: No-name ATAPI CD-ROM installed as master on IDE channel 1 (hard
drive is attached as master on IDE channel 0)
Kernel: Official 2.4.17 and Red Hat 2.4.9-21

Whenever I try to access the CD-ROM after boot, I get the following Oops:

Unable to handle kernel NULL pointer dereference at virtual address
00000063
c0193030
*pde = 00000000
Oops: 0000
CPU: 0
EIP: 0010:[<c0193030>] Not tainted
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010246
eax: c02b7730 ebx: 00000000 ecx: 00000005 edx: 00000004
esi: 00000005 edi: c02b7730 ebp: 00000001 esp: c0f51ee0
ds: 0018 es: 0018 ss: 0018
Process modprobe (pid: 1180, stackpage=c0f51000)
Stack: c02b7730 00000286 c8db3960 c0189762 c02b7730 c02b7730 00000007
c02b7730
        c3e03e00 c02b7730 00000134 c8db0a81 c02b7730 c8db3960 00000001
c8dad000
        00000001 00000015 00000001 c01165d7 c8db38a0 c0ab0000 000067a0
c0ab2000
Call Trace: [<c8db3960>] [<c0189762>] [<c8db0a81>] [<c8db3960>]
[<c01165d7>]
    [<c8db38a0>] [<c8dad060>] [<c0106f13>]
Code: 8a 15 63 00 00 00 83 e2 08 75 06 f6 43 6a 02 74 0c be 07 00

>> EIP; c0193030 <config_drive_xfer_rate+d0/110> <=====
Trace; c8db3960 <[ide-cd]ide_cdrom_driver+0/f>
Trace; c0189762 <ide_register_subdriver+92/100>
Trace; c8db0a81 <[ide-cd]init_module+a1/1af>
Trace; c8db3960 <[ide-cd]ide_cdrom_driver+0/f>
Trace; c01165d7 <sys_init_module+537/5f0>
Trace; c8db38a0 <[ide-cd].LC156+0/d>
Trace; c8dad060 <[ide-cd]__module_license+0/0>
Trace; c0106f13 <system_call+33/40>
Code; c0193030 <config_drive_xfer_rate+d0/110>
00000000 <_EIP>:
Code; c0193030 <config_drive_xfer_rate+d0/110> <=====
    0: 8a 15 63 00 00 00 mov 0x63,%dl <=====
Code; c0193036 <config_drive_xfer_rate+d6/110>
    6: 83 e2 08 and $0x8,%edx
Code; c0193039 <config_drive_xfer_rate+d9/110>
    9: 75 06 jne 11 <_EIP+0x11> c0193041
<config_drive_xfer_rate+e1/110>
Code; c019303b <config_drive_xfer_rate+db/110>
    b: f6 43 6a 02 testb $0x2,0x6a(%ebx)
Code; c019303f <config_drive_xfer_rate+df/110>
    f: 74 0c je 1d <_EIP+0x1d> c019304d
<config_drive_xfer_rate+ed/110>
Code; c0193041 <config_drive_xfer_rate+e1/110>
   11: be 07 00 00 00 mov $0x7,%esi

After the Oops, lsmod shows:

ide-cd 27072 3 (initializing)

and the module is stuck at initializing.
This CD-ROM worked fine on 2.2.20 as long as I booted with "hdc=noprobe
hdc=cdrom" (otherwise I'd get "lost interrupt" messages). I have tried
"ide=nodma" with no effect, as well as trying with the "hdc=" options both
on and off. Running "hdparm -d0 /dev/hdc" before trying the mount causes
the same Oops.

Any ideas?

Thanks!

-- 
Manuel A. McLure KE6TAW | ...for in Ulthar, according to an ancient
<manuel@mclure.org>     | and significant law, no man may kill a cat.
<http://www.mclure.org> |             -- H.P. Lovecraft
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Next message: Jeff Garzik: "Re: [PATCH] Generic HDLC patch for 2.5.3"
Previous message: Alan Cox: "Re: [PATCH] Generic HDLC patch for 2.5.3"
Next in thread: Andre Hedrick: "Re: 2.4.17 Oops when trying to mount ATAPI CDROM"
Reply: Andre Hedrick: "Re: 2.4.17 Oops when trying to mount ATAPI CDROM"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

This archive was generated by hypermail 2b29 : Thu Feb 07 2002 - 21:00:26 EST