Hallo Linus,
This is the slab name cleanup you originally requested when the reiserfs
slab name too long boot bug was introduced. It replaces the static
name limit for slab cache names with the requirement for the caller
to supply a stable name. This version addresses all concerns that were given
over earlier versions of the patch.
As I do not feel very strongly about the slab cache name limit and you
also do not seem to be interested in it and the original bug of reiserfs
not booting anymore has been long fixed in your tree with the patch
you originally rejected from me I will not resend this patch after this
try.
Patch against 2.5.4pre1.
-Andi
--- linux-2.5.4pre1-work/fs/bio.c-SLAB Tue Jan 15 17:53:31 2002
+++ linux-2.5.4pre1-work/fs/bio.c Thu Feb 7 01:45:14 2002
@@ -33,20 +33,24 @@
struct biovec_pool {
int size;
+ char *name;
kmem_cache_t *slab;
mempool_t *pool;
};
-static struct biovec_pool bvec_array[BIOVEC_NR_POOLS];
-
/*
* if you change this list, also change bvec_alloc or things will
* break badly! cannot be bigger than what you can fit into an
* unsigned short
*/
-static const int bvec_pool_sizes[BIOVEC_NR_POOLS] = { 1, 4, 16, 64, 128, 256 };
-#define BIO_MAX_PAGES (bvec_pool_sizes[BIOVEC_NR_POOLS - 1])
+#define BV(x) { x, "biovec-" #x }
+static struct biovec_pool bvec_array[BIOVEC_NR_POOLS] = {
+ BV(1), BV(4), BV(16), BV(64), BV(128), BV(256)
+};
+#undef BV
+
+#define BIO_MAX_PAGES (bvec_array[BIOVEC_NR_POOLS - 1].size)
static void *slab_pool_alloc(int gfp_mask, void *data)
{
@@ -64,7 +68,7 @@
struct bio_vec *bvl;
/*
- * see comment near bvec_pool_sizes define!
+ * see comment near bvec_array define!
*/
switch (nr) {
case 1 : *idx = 0; break;
@@ -452,21 +456,17 @@
static void __init biovec_init_pool(void)
{
- char name[16];
int i, size;
- memset(&bvec_array, 0, sizeof(bvec_array));
-
for (i = 0; i < BIOVEC_NR_POOLS; i++) {
struct biovec_pool *bp = bvec_array + i;
- size = bvec_pool_sizes[i] * sizeof(struct bio_vec);
+ size = bp->size * sizeof(struct bio_vec);
printk("biovec: init pool %d, %d entries, %d bytes\n", i,
- bvec_pool_sizes[i], size);
+ bp->size, size);
- snprintf(name, sizeof(name) - 1,"biovec-%d",bvec_pool_sizes[i]);
- bp->slab = kmem_cache_create(name, size, 0,
+ bp->slab = kmem_cache_create(bp->name, size, 0,
SLAB_HWCACHE_ALIGN, NULL, NULL);
if (!bp->slab)
panic("biovec: can't init slab cache\n");
@@ -474,7 +474,7 @@
slab_pool_free, bp->slab);
if (!bp->pool)
panic("biovec: can't init mempool\n");
- bp->size = size;
+ bp->size = size;
}
}
--- linux-2.5.4pre1-work/mm/slab.c-SLAB Tue Jan 15 17:53:36 2002
+++ linux-2.5.4pre1-work/mm/slab.c Thu Feb 7 01:45:14 2002
@@ -186,8 +186,6 @@
* manages a cache.
*/
-#define CACHE_NAMELEN 20 /* max name length for a slab cache */
-
struct kmem_cache_s {
/* 1) each alloc & free */
/* full, partial first, then free */
@@ -225,7 +223,7 @@
unsigned long failures;
/* 3) cache creation/removal */
- char name[CACHE_NAMELEN];
+ const char *name;
struct list_head next;
#ifdef CONFIG_SMP
/* 4) per-cpu data */
@@ -335,6 +333,7 @@
kmem_cache_t *cs_dmacachep;
} cache_sizes_t;
+/* These are the default caches for kmalloc. Custom caches can have other sizes. */
static cache_sizes_t cache_sizes[] = {
#if PAGE_SIZE == 4096
{ 32, NULL, NULL},
@@ -353,6 +352,29 @@
{131072, NULL, NULL},
{ 0, NULL, NULL}
};
+/* Must match cache_sizes above. Out of line to keep cache footprint low. */
+#define CN(x) { x, x " (DMA)" }
+static struct {
+ char *name;
+ char *name_dma;
+} cache_names[] = {
+#if PAGE_SIZE == 4096
+ CN("size-32"),
+#endif
+ CN("size-64"),
+ CN("size-128"),
+ CN("size-256"),
+ CN("size-512"),
+ CN("size-1024"),
+ CN("size-2048"),
+ CN("size-4096"),
+ CN("size-8192"),
+ CN("size-16384"),
+ CN("size-32768"),
+ CN("size-65536"),
+ CN("size-131072")
+};
+#undef CN
/* internal cache of cache description objs */
static kmem_cache_t cache_cache = {
@@ -437,7 +459,6 @@
void __init kmem_cache_sizes_init(void)
{
cache_sizes_t *sizes = cache_sizes;
- char name[20];
/*
* Fragmentation resistance on low memory - only use bigger
* page orders on machines with more than 32MB of memory.
@@ -450,9 +471,9 @@
* eliminates "false sharing".
* Note for systems short on memory removing the alignment will
* allow tighter packing of the smaller caches. */
- sprintf(name,"size-%Zd",sizes->cs_size);
if (!(sizes->cs_cachep =
- kmem_cache_create(name, sizes->cs_size,
+ kmem_cache_create(cache_names[sizes-cache_sizes].name,
+ sizes->cs_size,
0, SLAB_HWCACHE_ALIGN, NULL, NULL))) {
BUG();
}
@@ -462,9 +483,10 @@
offslab_limit = sizes->cs_size-sizeof(slab_t);
offslab_limit /= 2;
}
- sprintf(name, "size-%Zd(DMA)",sizes->cs_size);
- sizes->cs_dmacachep = kmem_cache_create(name, sizes->cs_size, 0,
- SLAB_CACHE_DMA|SLAB_HWCACHE_ALIGN, NULL, NULL);
+ sizes->cs_dmacachep = kmem_cache_create(
+ cache_names[sizes-cache_sizes].name_dma,
+ sizes->cs_size, 0,
+ SLAB_CACHE_DMA|SLAB_HWCACHE_ALIGN, NULL, NULL);
if (!sizes->cs_dmacachep)
BUG();
sizes++;
@@ -604,6 +626,11 @@
* Cannot be called within a int, but can be interrupted.
* The @ctor is run when new pages are allocated by the cache
* and the @dtor is run before the pages are handed back.
+ *
+ * @name must be valid until the cache is destroyed. This implies that
+ * the module calling this has to destroy the cache before getting
+ * unloaded.
+ *
* The flags are
*
* %SLAB_POISON - Poison the slab with a known test pattern (a5a5a5a5)
@@ -632,7 +659,6 @@
* Sanity checks... these are all serious usage bugs.
*/
if ((!name) ||
- ((strlen(name) >= CACHE_NAMELEN - 1)) ||
in_interrupt() ||
(size < BYTES_PER_WORD) ||
(size > (1<<MAX_OBJ_ORDER)*PAGE_SIZE) ||
@@ -797,8 +823,7 @@
cachep->slabp_cache = kmem_find_general_cachep(slab_size,0);
cachep->ctor = ctor;
cachep->dtor = dtor;
- /* Copy name over so we don't have problems with unloaded modules */
- strcpy(cachep->name, name);
+ cachep->name = name;
#ifdef CONFIG_SMP
if (g_cpucache_up)
@@ -811,10 +836,20 @@
list_for_each(p, &cache_chain) {
kmem_cache_t *pc = list_entry(p, kmem_cache_t, next);
-
- /* The name field is constant - no lock needed. */
- if (!strcmp(pc->name, name))
- BUG();
+ char tmp;
+ /* This happens when the module gets unloaded and doesn't
+ destroy its slab cache and noone else reuses the vmalloc
+ area of the module. Print a warning. */
+ if (__get_user(tmp,pc->name)) {
+ printk("SLAB: cache with size %d has lost its name\n",
+ pc->objsize);
+ continue;
+ }
+ if (!strcmp(pc->name,name)) {
+ printk("kmem_cache_create: duplicate cache %s\n",name);
+ up(&cache_chain_sem);
+ BUG();
+ }
}
}
@@ -1878,6 +1913,7 @@
unsigned long num_objs;
unsigned long active_slabs = 0;
unsigned long num_slabs;
+ const char *name;
cachep = list_entry(p, kmem_cache_t, next);
spin_lock_irq(&cachep->spinlock);
@@ -1906,8 +1942,15 @@
num_slabs+=active_slabs;
num_objs = num_slabs*cachep->num;
+ name = cachep->name;
+ {
+ char tmp;
+ if (__get_user(tmp, name))
+ name = "broken";
+ }
+
len += sprintf(page+len, "%-17s %6lu %6lu %6u %4lu %4lu %4u",
- cachep->name, active_objs, num_objs, cachep->objsize,
+ name, active_objs, num_objs, cachep->objsize,
active_slabs, num_slabs, (1<<cachep->gfporder));
#if STATS
--- linux-2.5.4pre1-work/drivers/scsi/scsi.c-SLAB Tue Jan 15 17:53:29 2002
+++ linux-2.5.4pre1-work/drivers/scsi/scsi.c Thu Feb 7 01:45:14 2002
@@ -87,13 +87,16 @@
struct scsi_host_sg_pool {
int size;
+ char *name;
kmem_cache_t *slab;
mempool_t *pool;
};
-static const int scsi_host_sg_pool_sizes[SG_MEMPOOL_NR] = { 8, 16, 32, 64, MAX_PHYS_SEGMENTS };
-struct scsi_host_sg_pool scsi_sg_pools[SG_MEMPOOL_NR];
-
+#define SP(x) { x, "sgpool-" #x }
+struct scsi_host_sg_pool scsi_sg_pools[SG_MEMPOOL_NR] = {
+ SP(8), SP(16), SP(32), SP(64), SP(MAX_PHYS_SEGMENTS)
+};
+#undef SP
/*
static const char RCSid[] = "$Header: /vger/u4/cvs/linux/drivers/scsi/scsi.c,v 1.38 1997/01/19 23:07:18 davem Exp $";
*/
@@ -2489,7 +2492,6 @@
static int __init init_scsi(void)
{
struct proc_dir_entry *generic;
- char name[16];
int i;
printk(KERN_INFO "SCSI subsystem driver " REVISION "\n");
@@ -2499,18 +2501,15 @@
*/
for (i = 0; i < SG_MEMPOOL_NR; i++) {
struct scsi_host_sg_pool *sgp = scsi_sg_pools + i;
- int size = scsi_host_sg_pool_sizes[i] * sizeof(struct scatterlist);
+ int size = sgp->size * sizeof(struct scatterlist);
- snprintf(name, sizeof(name) - 1, "sgpool-%d", scsi_host_sg_pool_sizes[i]);
- sgp->slab = kmem_cache_create(name, size, 0, SLAB_HWCACHE_ALIGN, NULL, NULL);
+ sgp->slab = kmem_cache_create(sgp->name, size, 0, SLAB_HWCACHE_ALIGN, NULL, NULL);
if (!sgp->slab)
panic("SCSI: can't init sg slab\n");
sgp->pool = mempool_create(SG_MEMPOOL_SIZE, scsi_pool_alloc, scsi_pool_free, sgp->slab);
if (!sgp->pool)
panic("SCSI: can't init sg mempool\n");
-
- sgp->size = size;
}
/*
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Thu Feb 07 2002 - 21:00:56 EST