I would like to say first, if I am sending this to the wrong address, please forgive me. I know nothing about reporting bugs, and my involvement with OpenSource is fairly fresh.
Following the instructions in REPORTING-BUGS...
[1.] tdfx? causes random signo=11 and hangs console
[2.] I am developing an application for X11 using SDL (http://www.libsdl.org/) and OpenGL (http://www.opengl.org). I will (sometimes) experiance a full console crash while my program de-inits. (I have never run my code more then 50 times before it crashes.) I have preformed a backtrace on the dead process, and have determined that tdfx is causing a signal 11. NOTE: I am currently running kernel 2.4.17, but it does not matter if I am running this kernel, or the one that came with my distro, RedHat 7.2.
[3.] tdfx, voodoo, kernel, freeze, crash
[4.] [root@elbmin linux]# cat /proc/version
Linux version 2.4.17 (root@elbmin.markley.edu) (gcc version 2.96 20000731 (Red Hat Linux 7.1 2.96-98)) #2 SMP Wed Feb 13 01:17:27 EST 2002
[5.] oops? no, no oops.
[6.] There is a small TGZ file attached, it includes both the source to the failure and two seperate full backtraces.
[7.]
[7.1.] [root@elbmin linux]# sh scripts/ver_linux
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
Linux elbmin.markley.edu 2.4.17 #2 SMP Wed Feb 13 01:17:27 EST 2002 i586 unknown
Gnu C 2.96
Gnu make 3.79.1
binutils 2.11.90.0.8
util-linux 2.11f
mount 2.11g
modutils 2.4.6
e2fsprogs 1.23
reiserfsprogs 3.x.0j
pcmcia-cs 3.1.22
PPP 2.4.1
isdn4k-utils 3.1pre1
Linux C Library 2.2.4
Dynamic linker (ldd) 2.2.4
Procps 2.0.7
Net-tools 1.60
Console-tools 0.3.3
Sh-utils 2.0.11
Modules Loaded
[7.2.] [root@elbmin linux]# cat /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 5
model : 8
model name : AMD-K6(tm) 3D processor
stepping : 12
cpu MHz : 522.812
cache size : 64 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr mce cx8 pge mmx syscall 3dnow k6_mtrr
bogomips : 1042.02
[7.3.] NO MODULES LOADED
[7.4.] [root@elbmin linux]# cat /proc/ioports
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial(auto)
0330-0331 : cmpci Midi
0376-0376 : ide1
0378-037a : parport0
03c0-03df : vga+
03f6-03f6 : ide0
0cf8-0cff : PCI conf1
a000-afff : PCI Bus #01
ac00-ac7f : Silicon Integrated Systems [SiS] 6306 3D-AGP
d000-d0ff : LSI Logic / Symbios Logic (formerly NCR) 53c825
d000-d07f : ncr53c8xx
d800-d8ff : C-Media Electronics Inc CM8738
d800-d8ff : cmpci
da00-da3f : C-Media Electronics Inc CM8738
dc00-dc7f : Davicom Semiconductor, Inc. Ethernet 100/10 MBit
dc00-dc7f : tulip
de00-deff : 3Dfx Interactive, Inc. Voodoo 3
ffa0-ffaf : Silicon Integrated Systems [SiS] 5513 [IDE]
ffa0-ffa7 : ide0
ffa8-ffaf : ide1
[root@elbmin linux]# cat /proc/iomem
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000c8000-000cbfff : Extension ROM
000cc000-000cffff : Extension ROM
000f0000-000fffff : System ROM
00100000-07feffff : System RAM
00100000-0028afab : Kernel code
0028afac-002fe3df : Kernel data
07ff0000-07ff7fff : ACPI Tables
07ff8000-07ffffff : ACPI Non-volatile Storage
deb00000-dfbfffff : PCI Bus #01
df000000-df7fffff : Silicon Integrated Systems [SiS] 6306 3D-AGP
e0000000-e1ffffff : 3Dfx Interactive, Inc. Voodoo 3
e3d00000-e3dfffff : PCI Bus #01
e3df0000-e3dfffff : Silicon Integrated Systems [SiS] 6306 3D-AGP
e8000000-ebffffff : Silicon Integrated Systems [SiS] 530 Host
edfee000-edfeefff : Silicon Integrated Systems [SiS] 7001
edfee000-edfeefff : usb-ohci
edfefe00-edfefeff : LSI Logic / Symbios Logic (formerly NCR) 53c825
edfeff80-edfeffff : Davicom Semiconductor, Inc. Ethernet 100/10 MBit
edfeff80-edfeffff : tulip
ee000000-efffffff : 3Dfx Interactive, Inc. Voodoo 3
fec00000-fec00fff : reserved
fee00000-fee00fff : reserved
fffc0000-ffffffff : reserved
[7.5.] [root@elbmin linux]# /sbin/lspci -vvv
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 530 Host (rev 03)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 32
Region 0: Memory at e8000000 (32-bit, non-prefetchable) [size=64M]
Capabilities: [c0] AGP version 2.0
Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
00:00.1 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev d0) (prog-if 8a [Master SecP PriP])
Subsystem: Silicon Integrated Systems [SiS] SiS5513 EIDE Controller (A,B step)
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 128
Interrupt: pin A routed to IRQ 0
Region 0: I/O ports at <ignored>
Region 1: I/O ports at <ignored>
Region 2: I/O ports at <ignored>
Region 3: I/O ports at <ignored>
Region 4: I/O ports at ffa0 [size=16]
00:01.0 ISA bridge: Silicon Integrated Systems [SiS] 85C503/5513 (rev b3)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:01.1 Class ff00: Silicon Integrated Systems [SiS] ACPI
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:01.2 USB Controller: Silicon Integrated Systems [SiS] 7001 (rev 11) (prog-if 10 [OHCI])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (20000ns max)
Interrupt: pin A routed to IRQ 4
Region 0: Memory at edfee000 (32-bit, non-prefetchable) [size=4K]
00:02.0 PCI bridge: Silicon Integrated Systems [SiS] 5591/5592 AGP (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: e3d00000-e3dfffff
Prefetchable memory behind bridge: deb00000-dfbfffff
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
00:09.0 VGA compatible controller: 3Dfx Interactive, Inc. Voodoo 3 (rev 01) (prog-if 00 [VGA])
Subsystem: 3Dfx Interactive, Inc. Voodoo3
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR+
Interrupt: pin A routed to IRQ 0
Region 0: Memory at ee000000 (32-bit, non-prefetchable) [size=32M]
Region 1: Memory at e0000000 (32-bit, prefetchable) [size=32M]
Region 2: I/O ports at de00 [size=256]
Expansion ROM at edff0000 [disabled] [size=64K]
Capabilities: [60] Power Management version 1
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0a.0 SCSI storage controller: Symbios Logic Inc. (formerly NCR) 53c825 (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at d000 [size=256]
Region 1: Memory at edfefe00 (32-bit, non-prefetchable) [size=256]
Expansion ROM at edf40000 [disabled] [size=256K]
00:0c.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10)
Subsystem: C-Media Electronics Inc CMI8738/C3DX PCI Audio Device
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (500ns min, 6000ns max)
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at d800 [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0c.1 Communication controller: C-Media Electronics Inc CM8738 (rev 10)
Subsystem: C-Media Electronics Inc CM8738
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 9
Region 0: I/O ports at da00 [size=64]
Capabilities: [40] Power Management version 2
Flags: PMEClk+ DSI- D1- D2+ AuxCurrent=55mA PME(D0+,D1-,D2+,D3hot+,D3cold+)
Status: D3 PME-Enable+ DSel=0 DScale=0 PME+
00:0d.0 Ethernet controller: Davicom Semiconductor, Inc. Ethernet 100/10 MBit (rev 10)
Subsystem: Unknown device 0291:8212
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (5000ns min, 10000ns max)
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at dc00 [size=128]
Region 1: Memory at edfeff80 (32-bit, non-prefetchable) [size=128]
Expansion ROM at edf80000 [disabled] [size=256K]
Capabilities: [50] Power Management version 1
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME+
01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 6306 3D-AGP (rev a3) (prog-if 00 [VGA])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Region 0: Memory at df000000 (32-bit, prefetchable) [disabled] [size=8M]
Region 1: Memory at e3df0000 (32-bit, non-prefetchable) [disabled] [size=64K]
Region 2: I/O ports at ac00 [disabled] [size=128]
Capabilities: [40] Power Management version 1
Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] AGP version 1.0
Status: RQ=1 SBA- 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
[7.6.] [root@elbmin linux]# cat /proc/scsi/scsi
Attached devices: none
[7.7.] Please! No more cutting and pasting! This by itself is way more than enough to get me shunned from the linux community forever and ever! (Especially if I am sending this to the wrong address.)
[8.] Sadly, SDL is catching signals. It won't let me force a core dump. So all stack analysis is done by having gdb attach itself to the dead process id.
Having originally thought (before the backtrace) that this was an SDL bug, I allready had the SDL masters scrutinize my code. I had some minor problems with my init code, but that's fixed now. My init code and my de-init code is flawless.
The backtraces are to be found at bug.tgz/logs/backtrace###.txt
Obviously, this only happens when you are using a Voodoo card, if it's the voodoo driver that's the culprit.
It seems to happen more frequently on my slower machine, and even more frequently if processer intensive things are happening. (Methinks it is timing related...)
CoolMan
This archive was generated by hypermail 2b29 : Sat Feb 23 2002 - 21:00:14 EST