> From: Linus Torvalds <torvalds@transmeta.com>
> Date: 2002-02-13 16:47:33
> Subject: Re: PATCH 2.5.4 i810_audio, bttv, working at all.
> On Wed, 13 Feb 2002, Jeff Garzik wrote:
> >
> > These changes are wrong. The addresses desired need to be obtained from
> > the pci_alloc_consistent return values.
>
> Let's face it, people won't care about the complex PCI interfaces unless
> they give you something useful.
I cannot believe that I am reading that. The pinhead penguin
is totally off the thread. The fix for i810 took me less than
10 minutes, and it works perfectly! What the hell are you
talking about here? What complex interfaces?! Is this a list
for kernel programmers or milksuckers? The interface is
simple as a pancake!
-- Pete
P.S. Doug, for heaven's sake, push the fix upstrem ASAP, please.
I cannot stand this stupidity and incompetence anymore.
P.P.S. Posting this FOR THE THIRD TIME in reply for a broken
patch. Next guy to post a broken "fix" for i810 with
isa_virt_to_bus or virt_to_phis may suffer very badly.
--- linux-2.5.3/drivers/sound/i810_audio.c Mon Jan 28 14:35:13 2002
+++ linux-2.5.3-p3/drivers/sound/i810_audio.c Fri Feb 8 16:24:05 2002
@@ -335,7 +335,6 @@
struct i810_card {
- struct i810_channel channel[3];
unsigned int magic;
/* We keep i810 cards in a linked list */
@@ -359,6 +358,8 @@
/* structures for abstraction of hardware facilities, codecs, banks and channels*/
struct ac97_codec *ac97_codec[NR_AC97];
struct i810_state *states[NR_HW_CH];
+ struct i810_channel *channel; /* 1:1 to states[] but diff. lifetime */
+ dma_addr_t chandma;
u16 ac97_features;
u16 ac97_status;
@@ -939,7 +940,7 @@
for(i=0;i<dmabuf->numfrag;i++)
{
- sg->busaddr=virt_to_bus(dmabuf->rawbuf+dmabuf->fragsize*i);
+ sg->busaddr=(u32)dmabuf->dma_handle+dmabuf->fragsize*i;
// the card will always be doing 16bit stereo
sg->control=dmabuf->fragsamples;
if(state->card->pci_id == PCI_DEVICE_ID_SI_7012)
@@ -954,7 +955,9 @@
}
spin_lock_irqsave(&state->card->lock, flags);
outb(2, state->card->iobase+c->port+OFF_CR); /* reset DMA machine */
- outl(virt_to_bus(&c->sg[0]), state->card->iobase+c->port+OFF_BDBAR);
+ outl((u32)state->card->chandma +
+ c->num*sizeof(struct i810_channel),
+ state->card->iobase+c->port+OFF_BDBAR);
outb(0, state->card->iobase+c->port+OFF_CIV);
outb(0, state->card->iobase+c->port+OFF_LVI);
@@ -1669,7 +1672,7 @@
if (size > (PAGE_SIZE << dmabuf->buforder))
goto out;
ret = -EAGAIN;
- if (remap_page_range(vma->vm_start, virt_to_phys(dmabuf->rawbuf),
+ if (remap_page_range(vma, vma->vm_start, virt_to_phys(dmabuf->rawbuf),
size, vma->vm_page_prot))
goto out;
dmabuf->mapped = 1;
@@ -1722,7 +1725,9 @@
}
if (c != NULL) {
outb(2, state->card->iobase+c->port+OFF_CR); /* reset DMA machine */
- outl(virt_to_bus(&c->sg[0]), state->card->iobase+c->port+OFF_BDBAR);
+ outl((u32)state->card->chandma +
+ c->num*sizeof(struct i810_channel),
+ state->card->iobase+c->port+OFF_BDBAR);
outb(0, state->card->iobase+c->port+OFF_CIV);
outb(0, state->card->iobase+c->port+OFF_LVI);
}
@@ -2881,15 +2886,26 @@
card->alloc_rec_pcm_channel = i810_alloc_rec_pcm_channel;
card->alloc_rec_mic_channel = i810_alloc_rec_mic_channel;
card->free_pcm_channel = i810_free_pcm_channel;
- card->channel[0].offset = 0;
- card->channel[0].port = 0x00;
- card->channel[0].num=0;
- card->channel[1].offset = 0;
- card->channel[1].port = 0x10;
- card->channel[1].num=1;
- card->channel[2].offset = 0;
- card->channel[2].port = 0x20;
- card->channel[2].num=2;
+
+ if ((card->channel = pci_alloc_consistent(pci_dev,
+ sizeof(struct i810_channel)*NR_HW_CH, &card->chandma)) == NULL) {
+ printk(KERN_ERR "i810: cannot allocate channel DMA memory\n");
+ goto out_mem;
+ }
+
+ { /* We may dispose of this altogether some time soon, so... */
+ struct i810_channel *cp = card->channel;
+
+ cp[0].offset = 0;
+ cp[0].port = 0x00;
+ cp[0].num = 0;
+ cp[1].offset = 0;
+ cp[1].port = 0x10;
+ cp[1].num = 1;
+ cp[2].offset = 0;
+ cp[2].port = 0x20;
+ cp[2].num = 2;
+ }
/* claim our iospace and irq */
request_region(card->iobase, 64, card_names[pci_id->driver_data]);
@@ -2900,8 +2916,7 @@
printk(KERN_ERR "i810_audio: unable to allocate irq %d\n", card->irq);
release_region(card->iobase, 64);
release_region(card->ac97base, 256);
- kfree(card);
- return -ENODEV;
+ goto out_chan;
}
/* initialize AC97 codec and register /dev/mixer */
@@ -2909,8 +2924,7 @@
release_region(card->iobase, 64);
release_region(card->ac97base, 256);
free_irq(card->irq, card);
- kfree(card);
- return -ENODEV;
+ goto out_chan;
}
pci_set_drvdata(pci_dev, card);
@@ -2931,11 +2945,17 @@
unregister_sound_mixer(card->ac97_codec[i]->dev_mixer);
kfree (card->ac97_codec[i]);
}
- kfree(card);
- return -ENODEV;
+ goto out_chan;
}
card->initializing = 0;
return 0;
+
+ out_chan:
+ pci_free_consistent(pci_dev, sizeof(struct i810_channel)*NR_HW_CH,
+ card->channel, card->chandma);
+ out_mem:
+ kfree(card);
+ return -ENODEV;
}
static void __exit i810_remove(struct pci_dev *pci_dev)
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sat Feb 23 2002 - 21:00:20 EST