You don't need dummy ethN:N interfaces. Use the iproute2 tools, 'ip'
specifically.
ip link set eth0 down
ip address flush eth0
ip address add 1.2.3.4/24 brd + dev eth0
ip address add 1.2.3.5/25 brd + dev eth0
ip address add ....to your heart's content
ip link set eth0 up
ip route add default via 2.3.8.9 via 5.4.3.2 dev eth0
See the scripts on http://blue-labs.org/ for some examples.
David
Jim Roland wrote:
>I seem to remember back in either Kernel 2.0 or 2.2 there was a limit of 256
>aliases within the ethX aliasing (eg, eth0, then eth0:0 thru eth0:255).
>
>Has the limit on this been expanded with Kernel 2.4, is it stable and/or
>advised? I have a need to bind more than 256 addresses to a single
>interface. Without installing additional network cards.
>
>Thanks,
>Jim Roland, RHCE
>
>
>-
>To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
>the body of a message to majordomo@vger.kernel.org
>More majordomo info at http://vger.kernel.org/majordomo-info.html
>Please read the FAQ at http://www.tux.org/lkml/
>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sat Feb 23 2002 - 21:00:20 EST