Re: ide cd-recording not working in 2.4.18-rc2-ac1

From: Rogier Wolff (R.E.Wolff@BitWizard.nl)
Date: Thu Feb 21 2002 - 03:08:09 EST

Alan Cox wrote:
> > I get this on every cd I try and I've tried more than I'd have liked to.
> >
> > Performing OPC...
> > /usr/bin/cdrecord: Input/output error. write_g1: scsi sendcmd: no error
> > CDB: 2A 00 00 00 00 1F 00 00 1F 00
> > status: 0x2 (CHECK CONDITION)
> > Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 21 00 00 00
> > Sense Key: 0x5 Illegal Request, Segment 0
> > Sense Code: 0x21 Qual 0x00 (logical block address out of range) Fru 0x0
>
> Thats saying that cdrecord sent the drive a bogus command.

A friend of mine had exactly the same problems. These were eventually
solved by buying a new CDR drive.

We tried running the "cdrecord" from the old installation: Same problem.

We tried it on the remainder of the spindle that used to work with the old
installation: Same problem.

We tried it with the CDR discs that I use here: Same problem.

(I was suspecting a problem with the disks as "start of lead in:
97:23:00" sounded a bit odd to me, and would result in "logical block
address out of range", So I first suspected the discs to be
incompatible with the current cdrecord.)

> > Now I know every cd isn't bad because they used to work in older
> > 2.4.17ish kernels. I have scsi-generic support compiled as a module as
>
> Does it still work with them ?

His old installation won't boot anymore, so in that case we can't
easily try anymore... Grmbl.

> > SCSI subsystem driver Revision: 1.00
> > scsi0 : SCSI host adapter emulation for IDE ATAPI devices
>
> Right same as I am using

Ehmm. My story is about a real SCSI CDR drive. He now has an IDE drive.

> > not sure what else I can get informationwize about what the drive is
> > doing.
>
> What type of IDE controller ?

NCR810.

                        Roger. 

-- 
** R.E.Wolff@BitWizard.nl ** http://www.BitWizard.nl/ ** +31-15-2137555 **
*-- BitWizard writes Linux device drivers for any device you may have! --*
* There are old pilots, and there are bold pilots. 
* There are also old, bald pilots. 
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

This archive was generated by hypermail 2b29 : Sat Feb 23 2002 - 21:00:30 EST