[1.] One line summary of the problem:
Compile of 8139too.c fails in kernel 2.4.18-rc3
[2.] Full description of the problem/report:
I applied patch-2.4.18-rc3 to kernel-source-2.4.17 and attempted
to compile with RTL-8139 network card support enabled. 8139too.c
failed to compile with the message:
gcc -D__KERNEL__ -I/mnt/syjet/src/kernel-source-2.4.18-rc3/include -Wall \
-Wstrict-prototypes -Wno-trigraphs -O2 -fomit-frame-pointer \
-fno-strict-aliasing -fno-common -pipe -mpreferred-stack-boundary=2 \
-march=i686 -DKBUILD_BASENAME=8139too -c -o 8139too.o 8139too.c
8139too.c: In function `rtl8139_init_one':
8139too.c:1014: structure has no member named `mii'
8139too.c:1020: structure has no member named `mii'
8139too.c:1021: structure has no member named `mii'
8139too.c:1025: structure has no member named `mii'
8139too.c: In function `rtl8139_open':
8139too.c:1282: structure has no member named `mii'
8139too.c:1282: structure has no member named `mii'
8139too.c: In function `rtl_check_media':
8139too.c:1315: structure has no member named `mii'
8139too.c:1321: structure has no member named `mii'
8139too.c: In function `rtl8139_thread_iter':
8139too.c:1513: structure has no member named `mii'
8139too.c:1516: structure has no member named `mii'
8139too.c:1517: structure has no member named `mii'
8139too.c:1524: structure has no member named `mii'
8139too.c: In function `rtl8139_weird_interrupt':
8139too.c:1977: structure has no member named `mii'
8139too.c:1978: structure has no member named `mii'
8139too.c:1979: structure has no member named `mii'
8139too.c: In function `netdev_ethtool_ioctl':
8139too.c:2242: structure has no member named `mii'
8139too.c:2255: structure has no member named `mii'
8139too.c:2261: structure has no member named `mii'
8139too.c:2266: structure has no member named `mii'
8139too.c: In function `netdev_ioctl':
8139too.c:2369: structure has no member named `mii'
8139too.c:2371: structure has no member named `mii'
make[3]: *** [8139too.o] Error 1
make[3]: Leaving directory `/mnt/syjet/src/kernel-source-2.4.18-rc3/drivers/net'make[2]: *** [first_rule] Error 2
make[2]: Leaving directory `/mnt/syjet/src/kernel-source-2.4.18-rc3/drivers/net'make[1]: *** [_subdir_net] Error 2
make[1]: Leaving directory `/mnt/syjet/src/kernel-source-2.4.18-rc3/drivers'
make: *** [_dir_drivers] Error 2
[3.] Keywords (i.e., modules, networking, kernel):
kernel RTL-8139
[4.] Kernel version (from /proc/version):
Linux version 2.4.18-pre9
[5.] Output of Oops.. message (if applicable) with symbolic information
resolved (see Documentation/oops-tracing.txt)
[6.] A small shell script or example program which triggers the
problem (if possible)
[7.] Environment
[7.1.] Software (add the output of the ver_linux script here)
Linux egor.linux.home 2.4.18-pre9 #3 Thu Feb 7 20:45:32 MST 2002 i686 unknown
Gnu C 2.95.4
Gnu make 3.79.1
util-linux 2.11n
mount 2.11n
modutils 2.4.13
e2fsprogs 1.26
PPP 2.4.1
Linux C Library 2.2.5
Dynamic linker (ldd) 2.2.5
Procps 2.0.7
Net-tools 1.60
Kbd 1.06
Sh-utils 2.0.11
Modules Loaded ad1816 sound soundcore
[7.2.] Processor information (from /proc/cpuinfo):
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 3
model name : Pentium II (Klamath)
stepping : 3
cpu MHz : 265.913
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov mmx
bogomips : 530.84
[7.3.] Module information (from /proc/modules):
ad1816 9088 1 (autoclean)
sound 51596 1 (autoclean) [ad1816]
soundcore 3268 4 (autoclean) [sound]
[7.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem)
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
0213-0213 : isapnp read
0376-0376 : ide1
0378-037a : parport0
03c0-03df : vga+
03e8-03ef : serial(auto)
03f6-03f6 : ide0
03f8-03ff : serial(set)
0500-050f : AD1816 Sound
0a79-0a79 : isapnp write
0cf8-0cff : PCI conf1
f000-f0ff : Realtek Semiconductor Co., Ltd. RTL-8139
f000-f0ff : 8139too
f480-f4ff : Digital Equipment Corporation DECchip 21041 [Tulip Pass 3]
f480-f4ff : tulip
f800-f8ff : Adaptec AIC-7861
f800-f8ff : aic7xxx
fc00-fcff : ATI Technologies Inc 3D Rage II+ 215GTB [Mach64 GTB]
ff80-ff9f : Intel Corp. 82371SB PIIX3 USB [Natoma/Triton II]
ffa0-ffaf : Intel Corp. 82371SB PIIX3 IDE [Natoma/Triton II]
ffa0-ffa7 : ide0
ffa8-ffaf : ide1
00000000-0009efff : System RAM
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000c8000-000cc7ff : Extension ROM
000f0000-000fffff : System ROM
00100000-07ffffff : System RAM
00100000-00232658 : Kernel code
00232659-002a163f : Kernel data
fb000000-fbffffff : ATI Technologies Inc 3D Rage II+ 215GTB [Mach64 GTB]
ffbee000-ffbeefff : Adaptec AIC-7861
ffbee000-ffbeefff : aic7xxx
ffbef000-ffbeffff : ATI Technologies Inc 3D Rage II+ 215GTB [Mach64 GTB]
fff7f800-fff7f8ff : Realtek Semiconductor Co., Ltd. RTL-8139
fff7f800-fff7f8ff : 8139too
fff7fc00-fff7fc7f : Digital Equipment Corporation DECchip 21041 [Tulip Pass 3]
fff7fc00-fff7fc7f : tulip
[7.5.] PCI information ('lspci -vvv' as root)
00:00.0 Host bridge: Intel Corp. 440FX - 82441FX PMC [Natoma] (rev 02)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 32
00:07.0 ISA bridge: Intel Corp. 82371SB PIIX3 ISA [Natoma/Triton II] (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:07.1 IDE interface: Intel Corp. 82371SB PIIX3 IDE [Natoma/Triton II] (prog-if 80 [Master])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Region 4: I/O ports at ffa0 [size=16]
00:07.2 USB Controller: Intel Corp. 82371SB PIIX3 USB [Natoma/Triton II] (rev 01) (prog-if 00 [UHCI])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin D routed to IRQ 11
Region 4: I/O ports at ff80 [size=32]
00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139 (rev 10)
Subsystem: Addtron Technology Co, Inc.: Unknown device 1360
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 240 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 9
Region 0: I/O ports at f000 [size=256]
Region 1: Memory at fff7f800 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0f.0 SCSI storage controller: Adaptec AIC-7861 (rev 03)
Subsystem: Adaptec AHA-2940AU Single
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 40 (1000ns min, 1000ns max), cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at f800 [disabled] [size=256]
Region 1: Memory at ffbee000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:11.0 Ethernet controller: Digital Equipment Corporation DECchip 21041 [Tulip Pass 3] (rev 21)
Subsystem: Standard Microsystems Corp [SMC]: Unknown device 2007
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at f480 [size=128]
Region 1: Memory at fff7fc00 (32-bit, non-prefetchable) [size=128]
Expansion ROM at <unassigned> [disabled] [size=256K]
00:13.0 VGA compatible controller: ATI Technologies Inc 3D Rage II+ 215GTB [Mach64 GTB] (rev 9a) (prog-if 00 [VGA])
Subsystem: ATI Technologies Inc 3D Rage II+ 215GTB [Mach64 GTB]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 72 (2000ns min), cache line size 08
Region 0: Memory at fb000000 (32-bit, non-prefetchable) [size=16M]
Region 1: I/O ports at fc00 [size=256]
Region 2: Memory at ffbef000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at <unassigned> [disabled] [size=128K]
[7.6.] SCSI information (from /proc/scsi/scsi)
Host: scsi0 Channel: 00 Id: 01 Lun: 00
Vendor: SEAGATE Model: ST410800N Rev: 7101
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 02 Lun: 00
Vendor: HP Model: C5110A Rev: 3701
Type: Processor ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 03 Lun: 00
Vendor: SyQuest Model: SyJet-S Rev: 0111
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 06 Lun: 00
Vendor: YAMAHA Model: CRW6416S Rev: 1.0b
Type: CD-ROM ANSI SCSI revision: 02
[7.7.] Other information that might be relevant to the problem
(please look in /proc and include all information that you
think to be relevant):
[X.] Other notes, patches, fixes, workarounds:
If I copy 8139too.c.org to 8139too.c and rerun "make bzImage",
the compile completes and the kernel functions normally.
--
Jim
------------------- Optional Methods -----------------------
Dr James A. Lupo (303) 423-2652
9667 Independence Dr. jalupo@attbi.com
Westminster CO 80021-6845 jalupo@regis.edu
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sat Feb 23 2002 - 21:00:39 EST