> I'm having trouble with a Seagate IDE tape drive that previously
> worked with 2.2.x kernels. (tape is a STT8000A travan drive)
>[...]
> PIIX4: not 100% native mode: will probe irqs later
> ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio
> ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
> hda: SAMSUNG SV2042H, ATA DISK drive
> hdc: SAMSUNG SV3063H, ATA DISK drive
> hdd: Seagate STT8000A, ATAPI TAPE drive
Make sure you switched DMA off with hdparm -d0.
You must find corresponding /dev/hdX, hdparm does not work
on /dev/ht0. If is a known problem (Red Hat bug #54517).
BTW, if you have trouble with Red Hat kernels, you may find
better luck trying Red Hat support. What if I did not see
your message here?
-- Pete
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sat Feb 23 2002 - 21:00:39 EST