Re: 2.4.18-rcx: Dual P3 + VIA + APIC

From: Adam Lackorzynski (adam@os.inf.tu-dresden.de)
Date: Fri Feb 22 2002 - 11:45:58 EST

On Fri Feb 22, 2002 at 14:11:01 +0100, Stephan von Krawczynski wrote:
> > > I compile my kernel (2.4.18-rc2) with the attached config. Please try
> > > it and tell your results. I can assure you that this machine runs rock
> > > solid over here for months.
> >
> > No luck here. Hangs during boot (tried with 2.4.18-rc2-ac2).
>
> Please start from a setup as close to mine as possible. That is 2.4.18-rc2.
> In setup switch MPS 1.4 support to disable and Power Management to disable.

No luck, even with completely switched off PM. "noapic" works. I
attached the stripped down config. It mostly hangs while setting up the
second CPU.

> > I even updated the BIOS from 1010 to 1014 as well (just in case). What
> > BIOS version are you running? And at how many MHz are the CPUs?
>
> I use BIOS 1010, 2 x P3 1 GHz and tried RAM from 512MB to 2GB.
> Currently installed are 2GB being 2 x 1GB registered DIMM.

2x 933, RAM is 960MB.

Adam 

-- 
Adam                 adam@os.inf.tu-dresden.de
  Lackorzynski         http://a.home.dhs.org
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/

This archive was generated by hypermail 2b29 : Sat Feb 23 2002 - 21:00:43 EST