When I try to boot a kernel with the latest IDE driver in order to
support my Promise UltraATA133 TX2 card, the system hangs at the point
where it should be listing the two drives attached to the card i.e. it
shows /dev/hdc which is a DVD drive, then stops. Sometimes I can reboot
with Alt-SysRq, sometimes a hard reset is needed. This happens with
2.4.17+ide, 2.4.18-rc1, 2.5.5-dj1.
Motherboard is MSI K7T-Turbo 2, K7 1.4, drives attached to the Promise
card are an IBM 60GXP and a Maxtor D740X-6L. The drives work when
attached to the VIA interface on the m/b.
I've also seen some "Spurious 8259A interrupt IRQ7" messages and some
APIC errors (APIC is currently disabled in the BIOS).
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sat Feb 23 2002 - 21:00:48 EST