> James> hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
> James> hda: drive not ready for command
>
> I ran into this as well under various kernels including 2.4.18. Try
> adding:
> append="idebus=50"
>
> to the lilo stanza for your kernel.
>
> It seems even after I amputated the offending "write" that causes the
> lockup, the bus speed was being set to 33MHz instead of 50Mhz. The
> above solved the problem for me.
This worked for me as well -- interesting.
> For anyone else trying to configure the pcg-c1mrx or pcg-c1mv, I'm
> updating linux configuration document as I work through the
> setup of the various devices:
> http://hale.org/~bhoward/issue_7/pcg-c1mrx.html
Good information there. Oddly enough, I don't need to specify the
pci=conf2, though.
Thanks to everyone for the speedy assistance!
- James
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sun Mar 31 2002 - 22:00:17 EST