Kernelpatch: multi line string problem in 2.5.14 with gcc3.x

From: J. Albers (j_albers@web.de)
Date: Wed May 08 2002 - 10:45:31 EST


Hi,

this patches fix problems with multi line stings in 2.5.14 /w gcc 3.x

Best regards,
 Jens Albers

========== Begin #1 ==========
--- aic7xxx_linux.c_2.5.14 Wed May 8 08:00:27 2002
+++ aic7xxx_linux.c Wed May 8 08:01:24 2002
@@ -398,26 +398,26 @@
 MODULE_LICENSE("Dual BSD/GPL");
 #endif
 MODULE_PARM(aic7xxx, "s");
-MODULE_PARM_DESC(aic7xxx, "period delimited, options string.
- verbose Enable verbose/diagnostic logging
- no_probe Disable EISA/VLB controller probing
- no_reset Supress initial bus resets
- extended Enable extended geometry on all controllers
- periodic_otag Send an ordered tagged transaction
periodically
- to prevent tag starvation. This may be
- required by some older disk drives/RAID
arrays.
- reverse_scan Sort PCI devices highest Bus/Slot to lowest
- tag_info:<tag_str> Set per-target tag depth
- seltime:<int> Selection
Timeout(0/256ms,1/128ms,2/64ms,3/32ms)
-
- Sample /etc/modules.conf line:
- Enable verbose logging
- Disable EISA/VLB probing
- Set tag depth on Controller 2/Target 2 to 10 tags
- Shorten the selection timeout to 128ms from its default of 256
-
- options
aic7xxx='\"verbose.no_probe.tag_info:{{}.{}.{..10}}.seltime:1\"'
-");
+MODULE_PARM_DESC(aic7xxx, "period delimited, options string."
+" verbose Enable verbose/diagnostic logging"
+" no_probe Disable EISA/VLB controller probing"
+" no_reset Supress initial bus resets"
+" extended Enable extended geometry on all controllers"
+" periodic_otag Send an ordered tagged transaction
periodically"
+" to prevent tag starvation. This may be"
+" required by some older disk drives/RAID
arrays."
+" reverse_scan Sort PCI devices highest Bus/Slot to lowest"
+" tag_info:<tag_str> Set per-target tag depth"
+" seltime:<int> Selection
Timeout(0/256ms,1/128ms,2/64ms,3/32ms)"
+""
+" Sample /etc/modules.conf line:"
+" Enable verbose logging"
+" Disable EISA/VLB probing"
+" Set tag depth on Controller 2/Target 2 to 10 tags"
+" Shorten the selection timeout to 128ms from its default of
256"
+""
+" options
aic7xxx='\"verbose.no_probe.tag_info:{{}.{}.{..10}}.seltime:1\"'"
+);
 #endif

 static void ahc_linux_handle_scsi_status(struct ahc_softc *,
========== End #1 ==========

========== Begin #2 ==========
--- i2c-core.c_2.5.14 Wed May 8 08:31:40 2002
+++ i2c-core.c Wed May 8 08:32:43 2002
@@ -381,10 +381,10 @@
                                                printk("i2c-core.o: while "
                                                       "unregistering driver "
                                                       "`%s', the client at "
- "address %02x of
- adapter `%s' could not
- be detached; driver
- not unloaded!",
+ "address %02x of "
+ "adapter `%s' could not
"
+ "be detached; driver "
+ "not unloaded!",
                                                       driver->name,
                                                       client->addr,
                                                       adap->name);
========== Begin #2 ==========
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Tue May 14 2002 - 12:00:09 EST