Hallo,
This patch tries to make most ISA only drivers dependent on CONFIG_ISA.
The motivation is that it is a lot of work to get old drivers to compile
meaningfully (at least without warnings, not even testing them) on x86-64
and a lot of them are obviously not 64bit safe. As it is very unlikely
that x86-64 boxes will ever have ISA slots[1] one simple way for that
is just removing the old ISA drivers from the configuration.
BTW I think CONFIG_ISA would be an useful configuration option for
i386 too - at least most modern PCs do not come with ISA slots anymore.
Back to the patch:
I left drivers/net alone because it looked like it already used CONFIG_ISA
properly. I went over drivers/scsi and some other drivers directories
and just made those that looked like ISA only dependent on CONFIG_ISA.
Note that I usually don't know much about these devices, I just took
a quick look at the source of the driver. Of course I may have made mistakes
during that, so if you see any driver wrongly marked please tell me.
You can test that on i386 by applying the patch, change the
"define_bool CONFIG_ISA y" in arch/i386/config to n and run your
favourite configuration tool and look for any ISA only drivers still appearing
as configuration choices.
I left out drivers/media/video and drivers/input/joystick - if there are any
ISA only devices in there please tell me.
Patch for 2.5.14
Thanks,
-Andi
[1] If someone later will be ever crazy enough to buy an x86-64 machine
and put an ISA bridge into it they'll have to pay for that and fix
all the ISA drivers they need ;)
diff -X ../../KDIFX -burp linux-vanilla/arch/x86_64/config.in linux/arch/x86_64/config.in
--- linux-vanilla/arch/x86_64/config.in Mon May 6 13:11:56 2002
+++ linux/arch/x86_64/config.in Thu May 9 19:41:56 2002
@@ -2,12 +2,15 @@
# For a description of the syntax of this configuration file,
# see Documentation/kbuild/config-language.txt.
#
+# Note: ISA is disabled and will hopefully never be enabled.
+#
+
mainmenu_name "Linux Kernel Configuration"
define_bool CONFIG_X86_64 y
define_bool CONFIG_X86 y
-define_bool CONFIG_ISA y
+define_bool CONFIG_ISA n
define_bool CONFIG_SBUS n
define_bool CONFIG_UID16 y
@@ -94,7 +99,7 @@ source drivers/mtd/Config.in
source drivers/parport/Config.in
-source drivers/pnp/Config.in
+#source drivers/pnp/Config.in
source drivers/block/Config.in
@@ -142,9 +147,10 @@ if [ "$CONFIG_NET" = "y" ]; then
bool 'Network device support' CONFIG_NETDEVICES
if [ "$CONFIG_NETDEVICES" = "y" ]; then
source drivers/net/Config.in
- if [ "$CONFIG_ATM" = "y" ]; then
- source drivers/atm/Config.in
- fi
+# ATM seems to be largely 64bit unsafe and also unmaintained.
+# if [ "$CONFIG_ATM" = "y" ]; then
+# source drivers/atm/Config.in
+# fi
fi
endmenu
fi
Only in linux/arch/x86_64: config.in-o
diff -X ../../KDIFX -burp linux-vanilla/drivers/char/Config.in linux/drivers/char/Config.in
--- linux-vanilla/drivers/char/Config.in Fri May 3 13:22:24 2002
+++ linux/drivers/char/Config.in Thu May 9 19:30:51 2002
@@ -39,7 +39,7 @@ if [ "$CONFIG_SERIAL_NONSTANDARD" = "y"
if [ "$CONFIG_DIGIEPCA" = "n" ]; then
tristate ' Digiboard PC/Xx Support' CONFIG_DIGI
fi
- tristate ' Hayes ESP serial port support' CONFIG_ESPSERIAL
+ dep_tristate ' Hayes ESP serial port support' CONFIG_ESPSERIAL CONFIG_ISA
tristate ' Moxa Intellio support' CONFIG_MOXA_INTELLIO
tristate ' Moxa SmartIO support' CONFIG_MOXA_SMARTIO
if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
Only in linux/drivers/char: Config.in-o
Only in linux/drivers/char: conmakehash
diff -X ../../KDIFX -burp linux-vanilla/drivers/media/radio/Config.in linux/drivers/media/radio/Config.in
--- linux-vanilla/drivers/media/radio/Config.in Sun Apr 14 21:18:54 2002
+++ linux/drivers/media/radio/Config.in Thu May 9 20:07:45 2002
@@ -4,6 +4,7 @@
mainmenu_option next_comment
comment 'Radio Adapters'
+if [ "$CONFIG_ISA" = "y" ]; then
dep_tristate ' ADS Cadet AM/FM Tuner' CONFIG_RADIO_CADET $CONFIG_VIDEO_DEV
dep_tristate ' AIMSlab RadioTrack (aka RadioReveal) support' CONFIG_RADIO_RTRACK $CONFIG_VIDEO_DEV
if [ "$CONFIG_RADIO_RTRACK" = "y" ]; then
@@ -21,9 +22,11 @@ dep_tristate ' GemTek Radio Card suppor
if [ "$CONFIG_RADIO_GEMTEK" = "y" ]; then
hex ' GemTek i/o port (0x20c, 0x30c, 0x24c or 0x34c)' CONFIG_RADIO_GEMTEK_PORT 34c
fi
+fi
dep_tristate ' GemTek PCI Radio Card support' CONFIG_RADIO_GEMTEK_PCI $CONFIG_VIDEO_DEV $CONFIG_PCI
dep_tristate ' Guillemot MAXI Radio FM 2000 radio' CONFIG_RADIO_MAXIRADIO $CONFIG_VIDEO_DEV
dep_tristate ' Maestro on board radio' CONFIG_RADIO_MAESTRO $CONFIG_VIDEO_DEV
+if [ "$CONFIG_ISA" = "y" ]; then
dep_tristate ' miroSOUND PCM20 radio' CONFIG_RADIO_MIROPCM20 $CONFIG_VIDEO_DEV $CONFIG_SOUND_ACI_MIXER
dep_tristate ' miroSOUND PCM20 radio RDS user interface (EXPERIMENTAL)' CONFIG_RADIO_MIROPCM20_RDS $CONFIG_RADIO_MIROPCM20 $CONFIG_EXPERIMENTAL
dep_tristate ' SF16FMI Radio' CONFIG_RADIO_SF16FMI $CONFIG_VIDEO_DEV
@@ -48,6 +51,7 @@ fi
dep_tristate ' Zoltrix Radio' CONFIG_RADIO_ZOLTRIX $CONFIG_VIDEO_DEV
if [ "$CONFIG_RADIO_ZOLTRIX" = "y" ]; then
hex ' ZOLTRIX I/O port (0x20c or 0x30c)' CONFIG_RADIO_ZOLTRIX_PORT 20c
+fi
fi
endmenu
Only in linux/drivers/media/radio: Config.in-o
diff -X ../../KDIFX -burp linux-vanilla/drivers/net/hamradio/Config.in linux/drivers/net/hamradio/Config.in
--- linux-vanilla/drivers/net/hamradio/Config.in Sun Apr 14 21:18:42 2002
+++ linux/drivers/net/hamradio/Config.in Thu May 9 19:59:53 2002
@@ -4,8 +4,10 @@ dep_tristate 'Serial port KISS driver' C
dep_tristate 'Serial port 6PACK driver' CONFIG_6PACK $CONFIG_AX25
dep_tristate 'BPQ Ethernet driver' CONFIG_BPQETHER $CONFIG_AX25
-dep_tristate 'High-speed (DMA) SCC driver for AX.25' CONFIG_DMASCC $CONFIG_AX25
-dep_tristate 'Z8530 SCC driver' CONFIG_SCC $CONFIG_AX25
+if [ "$CONFIG_ISA" = "y" ]; then
+ dep_tristate 'High-speed (DMA) SCC driver for AX.25' CONFIG_DMASCC $CONFIG_AX25
+ dep_tristate 'Z8530 SCC driver' CONFIG_SCC $CONFIG_AX25
+fi
if [ "$CONFIG_SCC" != "n" ]; then
bool ' additional delay for PA0HZP OptoSCC compatible boards' CONFIG_SCC_DELAY
bool ' support for TRX that feedback the tx signal to rx' CONFIG_SCC_TRXECHO
Only in linux/drivers/net/hamradio: Config.in-o
diff -X ../../KDIFX -burp linux-vanilla/drivers/net/wan/Config.in linux/drivers/net/wan/Config.in
--- linux-vanilla/drivers/net/wan/Config.in Mon May 6 13:11:57 2002
+++ linux/drivers/net/wan/Config.in Thu May 9 19:59:54 2002
@@ -9,11 +9,12 @@ bool 'Wan interfaces support' CONFIG_WAN
if [ "$CONFIG_WAN" = "y" ]; then
# There is no way to detect a comtrol sv11 - force it modular for now.
+ if [ "$CONFIG_ISA" = "y" ]; then
dep_tristate ' Comtrol Hostess SV-11 support' CONFIG_HOSTESS_SV11 m
-
# The COSA/SRP driver has not been tested as non-modular yet.
dep_tristate ' COSA/SRP sync serial boards support' CONFIG_COSA m
+ fi
#
# COMX drivers
Only in linux/drivers/net/wan: Config.in-o
Only in linux/drivers/pci: gen-devlist
diff -X ../../KDIFX -burp linux-vanilla/drivers/scsi/Config.in linux/drivers/scsi/Config.in
--- linux-vanilla/drivers/scsi/Config.in Fri May 3 13:22:27 2002
+++ linux/drivers/scsi/Config.in Thu May 9 19:54:28 2002
@@ -42,11 +42,17 @@ fi
if [ "$CONFIG_PCI" = "y" ]; then
dep_tristate '3ware Hardware ATA-RAID support' CONFIG_BLK_DEV_3W_XXXX_RAID $CONFIG_SCSI
fi
-dep_tristate '7000FASST SCSI support' CONFIG_SCSI_7000FASST $CONFIG_SCSI
+if [ "$CONFIG_ISA" = "y" ]; then
+ dep_tristate '7000FASST SCSI support' CONFIG_SCSI_7000FASST $CONFIG_SCSI
+fi
dep_tristate 'ACARD SCSI support' CONFIG_SCSI_ACARD $CONFIG_SCSI
-dep_tristate 'Adaptec AHA152X/2825 support' CONFIG_SCSI_AHA152X $CONFIG_SCSI
-dep_tristate 'Adaptec AHA1542 support' CONFIG_SCSI_AHA1542 $CONFIG_SCSI
-dep_tristate 'Adaptec AHA1740 support' CONFIG_SCSI_AHA1740 $CONFIG_SCSI
+if [ "$CONFIG_ISA" = "y" ]; then
+ dep_tristate 'Adaptec AHA152X/2825 support' CONFIG_SCSI_AHA152X $CONFIG_SCSI
+ dep_tristate 'Adaptec AHA1542 support' CONFIG_SCSI_AHA1542 $CONFIG_SCSI
+fi
+if [ "$CONFIG_EISA" = "y" ]; then
+ dep_tristate 'Adaptec AHA1740 support' CONFIG_SCSI_AHA1740 $CONFIG_SCSI
+fi
source drivers/scsi/aic7xxx/Config.in
if [ "$CONFIG_SCSI_AIC7XXX" != "y" ]; then
dep_tristate 'Old Adaptec AIC7xxx support' CONFIG_SCSI_AIC7XXX_OLD $CONFIG_SCSI
@@ -56,10 +62,16 @@ if [ "$CONFIG_SCSI_AIC7XXX" != "y" ]; th
bool ' Collect statistics to report in /proc' CONFIG_AIC7XXX_OLD_PROC_STATS
fi
fi
-dep_tristate 'Adaptec I2O RAID support ' CONFIG_SCSI_DPT_I2O $CONFIG_SCSI
+# All the I2O code and drivers do not seem to be 64bit safe.
+if [ "$CONFIG_X86_64" != "y" ]; then
+ dep_tristate 'Adaptec I2O RAID support ' CONFIG_SCSI_DPT_I2O $CONFIG_SCSI
+fi
dep_tristate 'AdvanSys SCSI support' CONFIG_SCSI_ADVANSYS $CONFIG_SCSI
dep_tristate 'Always IN2000 SCSI support' CONFIG_SCSI_IN2000 $CONFIG_SCSI
-dep_tristate 'AM53/79C974 PCI SCSI support' CONFIG_SCSI_AM53C974 $CONFIG_SCSI $CONFIG_PCI
+# does not use pci dma and seems to be isa/onboard only for old machines
+if [ "$CONFIG_X86_64" != "y" ]; then
+ dep_tristate 'AM53/79C974 PCI SCSI support' CONFIG_SCSI_AM53C974 $CONFIG_SCSI $CONFIG_PCI
+fi
dep_tristate 'AMI MegaRAID support' CONFIG_SCSI_MEGARAID $CONFIG_SCSI
dep_tristate 'BusLogic SCSI support' CONFIG_SCSI_BUSLOGIC $CONFIG_SCSI
@@ -70,7 +82,9 @@ if [ "$CONFIG_PCI" = "y" ]; then
dep_tristate 'Compaq Fibre Channel 64-bit/66Mhz HBA support' CONFIG_SCSI_CPQFCTS $CONFIG_SCSI
fi
dep_tristate 'DMX3191D SCSI support' CONFIG_SCSI_DMX3191D $CONFIG_SCSI $CONFIG_PCI
-dep_tristate 'DTC3180/3280 SCSI support' CONFIG_SCSI_DTC3280 $CONFIG_SCSI
+if [ "$CONFIG_ISA" != "y" ]; then
+ dep_tristate 'DTC3180/3280 SCSI support' CONFIG_SCSI_DTC3280 $CONFIG_SCSI
+fi
dep_tristate 'EATA ISA/EISA/PCI (DPT and generic EATA/DMA-compliant boards) support' CONFIG_SCSI_EATA $CONFIG_SCSI
if [ "$CONFIG_SCSI_EATA" != "n" ]; then
bool ' enable tagged command queueing' CONFIG_SCSI_EATA_TAGGED_QUEUE
@@ -84,12 +98,14 @@ if [ "$CONFIG_MCA" = "y" ]; then
dep_tristate 'Future Domain MCS-600/700 SCSI support' CONFIG_SCSI_FD_MCS $CONFIG_SCSI
fi
dep_tristate 'Intel/ICP (former GDT SCSI Disk Array) RAID Controller support' CONFIG_SCSI_GDTH $CONFIG_SCSI
-dep_tristate 'Generic NCR5380/53c400 SCSI support' CONFIG_SCSI_GENERIC_NCR5380 $CONFIG_SCSI
-if [ "$CONFIG_SCSI_GENERIC_NCR5380" != "n" ]; then
+if [ "$CONFIG_ISA" = "y" ]; then
+ dep_tristate 'Generic NCR5380/53c400 SCSI support' CONFIG_SCSI_GENERIC_NCR5380 $CONFIG_SCSI
+ if [ "$CONFIG_SCSI_GENERIC_NCR5380" != "n" ]; then
bool ' Enable NCR53c400 extensions' CONFIG_SCSI_GENERIC_NCR53C400
choice 'NCR5380/53c400 mapping method (use Port for T130B)' \
"Port CONFIG_SCSI_G_NCR5380_PORT \
Memory CONFIG_SCSI_G_NCR5380_MEM" Port
+ fi
fi
if [ "$CONFIG_MCA" = "y" ]; then
dep_tristate 'IBMMCA SCSI support' CONFIG_SCSI_IBMMCA $CONFIG_SCSI
@@ -111,7 +127,9 @@ if [ "$CONFIG_PARPORT" != "n" ]; then
bool ' ppa/imm option - Assume slow parport control register' CONFIG_SCSI_IZIP_SLOW_CTR
fi
fi
-dep_tristate 'NCR53c406a SCSI support' CONFIG_SCSI_NCR53C406A $CONFIG_SCSI
+if [ "$CONFIG_ISA" = "y" ]; then
+ dep_tristate 'NCR53c406a SCSI support' CONFIG_SCSI_NCR53C406A $CONFIG_SCSI
+fi
if [ "$CONFIG_MCA" = "y" ]; then
dep_tristate 'NCR Dual 700 MCA SCSI support' CONFIG_SCSI_NCR_D700 $CONFIG_SCSI
if [ "$CONFIG_SCSI_NCR_D700" != "n" ]; then
@@ -164,11 +182,17 @@ fi
if [ "$CONFIG_MCA" = "y" ]; then
dep_tristate 'NCR MCA 53C9x SCSI support' CONFIG_SCSI_MCA_53C9X $CONFIG_SCSI
fi
-dep_tristate 'PAS16 SCSI support' CONFIG_SCSI_PAS16 $CONFIG_SCSI
+if [ "$CONFIG_ISA" = "y" ]; then
+ dep_tristate 'PAS16 SCSI support' CONFIG_SCSI_PAS16 $CONFIG_SCSI
+fi
dep_tristate 'PCI2000 support' CONFIG_SCSI_PCI2000 $CONFIG_SCSI
dep_tristate 'PCI2220i support' CONFIG_SCSI_PCI2220I $CONFIG_SCSI
-dep_tristate 'PSI240i support' CONFIG_SCSI_PSI240I $CONFIG_SCSI
-dep_tristate 'Qlogic FAS SCSI support' CONFIG_SCSI_QLOGIC_FAS $CONFIG_SCSI
+if [ "$CONFIG_ISA" = "y" ]; then
+ dep_tristate 'PSI240i support' CONFIG_SCSI_PSI240I $CONFIG_SCSI
+fi
+if [ "$CONFIG_ISA" = "y" ]; then
+ dep_tristate 'Qlogic FAS SCSI support' CONFIG_SCSI_QLOGIC_FAS $CONFIG_SCSI
+fi
if [ "$CONFIG_PCI" = "y" ]; then
dep_tristate 'Qlogic ISP SCSI support' CONFIG_SCSI_QLOGIC_ISP $CONFIG_SCSI
dep_tristate 'Qlogic ISP FC SCSI support' CONFIG_SCSI_QLOGIC_FC $CONFIG_SCSI
@@ -177,24 +201,31 @@ if [ "$CONFIG_PCI" = "y" ]; then
fi
dep_tristate 'Qlogic QLA 1280 SCSI support' CONFIG_SCSI_QLOGIC_1280 $CONFIG_SCSI
fi
-if [ "$CONFIG_X86" = "y" ]; then
+if [ "$CONFIG_X86" = "y" -a "$CONFIG_ISA" = "y" ]; then
dep_tristate 'Seagate ST-02 and Future Domain TMC-8xx SCSI support' CONFIG_SCSI_SEAGATE $CONFIG_SCSI
fi
-dep_tristate 'Simple 53c710 SCSI support (Compaq, NCR machines)' CONFIG_SCSI_SIM710 $CONFIG_SCSI
-dep_tristate 'Symbios 53c416 SCSI support' CONFIG_SCSI_SYM53C416 $CONFIG_SCSI
+# definitely looks note 64bit safe:
+if [ "$CONFIG_ISA" = "y" -o "$CONFIG_MCA" = "y" -a "$CONFIG_X86_64" != "y" ]; then
+ dep_tristate 'Simple 53c710 SCSI support (Compaq, NCR machines)' CONFIG_SCSI_SIM710 $CONFIG_SCSI
+fi
+if [ "$CONFIG_ISA" = "y" ]; then
+ dep_tristate 'Symbios 53c416 SCSI support' CONFIG_SCSI_SYM53C416 $CONFIG_SCSI
+fi
if [ "$CONFIG_PCI" = "y" ]; then
dep_tristate 'Tekram DC390(T) and Am53/79C974 SCSI support' CONFIG_SCSI_DC390T $CONFIG_SCSI
if [ "$CONFIG_SCSI_DC390T" != "n" ]; then
bool ' _omit_ support for non-DC390 adapters' CONFIG_SCSI_DC390T_NOGENSUPP
fi
fi
-dep_tristate 'Trantor T128/T128F/T228 SCSI support' CONFIG_SCSI_T128 $CONFIG_SCSI
+if [ "$CONFIG_ISA" = "y" ]; then
+ dep_tristate 'Trantor T128/T128F/T228 SCSI support' CONFIG_SCSI_T128 $CONFIG_SCSI
+fi
dep_tristate 'UltraStor 14F/34F support' CONFIG_SCSI_U14_34F $CONFIG_SCSI
- if [ "$CONFIG_SCSI_U14_34F" != "n" ]; then
+if [ "$CONFIG_SCSI_U14_34F" != "n" ]; then
bool ' enable elevator sorting' CONFIG_SCSI_U14_34F_LINKED_COMMANDS
int ' maximum number of queued commands' CONFIG_SCSI_U14_34F_MAX_TAGS 8
- fi
-if [ "$CONFIG_X86" = "y" ]; then
+fi
+if [ "$CONFIG_X86" = "y" -a "$CONFIG_ISA" = "y" ]; then
dep_tristate 'UltraStor SCSI support' CONFIG_SCSI_ULTRASTOR $CONFIG_SCSI
fi
#
Only in linux/drivers/scsi: Config.in-o
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Tue May 14 2002 - 12:00:12 EST