At 12:15 AM 10/05/2002 -0700, Andrew Morton wrote:
>Try it with the block-highmem patch:
>
>http://www.kernel.org/pub/linux/kernel/people/andrea/kernels/v2.4/2.4.19pre1aa1/00_block-highmem-all-18b-4.gz
given i had to recompile the kernel to add lockmeter, i'd already cheated
and changed PAGE_OFFSET from 0xc0000000 to 0x80000000, obviating the
requirement for highmem altogether.
being fair to O_DIRECT and giving it 1mbyte disk-reads to work with and
giving normal i/o 8kbyte reads to work with.
still using 2.4.18 with profile=2 enabled and lockmeter in the kernel but
not turned on. still using the same disk spindles (just 6 this time), each
a 18G 15K RPM disk spindle.
i got tired of scanning the entire available space on an 18G disk so just
dropped the test down to the first 2G of each disk.
O_DIRECT is still a ~30% performance hit versus just talking to the
/dev/sdX device directly. profile traces at bottom.
normal block-device disks sd[m-r] without O_DIRECT, 64K x 8k reads:
[root@mel-stglab-host1 src]# readprofile -r;
./test_disk_performance blocks=64K bs=8k /dev/sd[m-r]
Completed reading 12000 mbytes in 125.028612 seconds (95.98
Mbytes/sec), 76usec mean
normal block-device disks sd[m-r] with O_DIRECT, 5K x 1 megabyte reads:
[root@mel-stglab-host1 src]# readprofile -r;
./test_disk_performance blocks=5K bs=1m direct /dev/sd[m-r]
Completed reading 12000 mbytes in 182.492975 seconds (65.76
Mbytes/sec), 15416usec mean
for interests-sake, compare this to using the 'raw' versions of the same disks:
[root@mel-stglab-host1 src]# readprofile -r;
./test_disk_performance blocks=5K bs=1m /dev/raw/raw[2-7]
Completed reading 12000 mbytes in 206.346371 seconds (58.15
Mbytes/sec), 16860usec mean
of course, these are all ~25% worse than if a mechanism of performing the
i/o avoiding the copy_to_user() altogether:
[root@mel-stglab-host1 src]# readprofile -r;
./test_disk_performance blocks=64K bs=8k nocopy /dev/sd[m-r]
Completed reading 12000 mbytes in 97.846938 seconds (122.64
Mbytes/sec), 59usec mean
anyone want to see any other benchmarks performed? would a comparison to
2.5.x be useful?
comparative profile=2 traces:
- no O_DIRECT:
[root@mel-stglab-host1 src]# readprofile -v | sort -n -k3 | tail -10
80125060 _spin_lock_ 718 6.4107
8013bfc0 brw_kiovec 798 0.9591
801cbb40 generic_make_request 830 2.8819
801f9400 scsi_init_io_vc 831 2.2582
8013c840 try_to_free_buffers 1198 3.4034
8013a190 end_buffer_io_async 2453 12.7760
8012b100 file_read_actor 3459 36.0312
801cb4e0 __make_request 7532 4.6152
80105220 default_idle 106468 1663.5625
00000000 total 134102 0.0726
- O_DIRECT, disks /dev/sd[m-r]:
[root@mel-stglab-host1 src]# readprofile -v | sort -n -k3 | tail -10
801cbb40 generic_make_request 72 0.2500
8013ab00 set_bh_page 73 1.1406
801cbc60 submit_bh 116 1.0357
801f72a0 __scsi_end_request 133 0.4618
80139540 unlock_buffer 139 1.7375
8013bf10 end_buffer_io_kiobuf 302 4.7188
8013bfc0 brw_kiovec 357 0.4291
801cb4e0 __make_request 995 0.6097
80105220 default_idle 34243 535.0469
00000000 total 37101 0.0201
- /dev/raw/raw[2-7]:
[root@mel-stglab-host1 src]# readprofile -v | sort -n -k3 | tail -10
8013bf50 wait_kio 349 3.1161
801cbb40 generic_make_request 461 1.6007
801cbc60 submit_bh 526 4.6964
80139540 unlock_buffer 666 8.3250
801f72a0 __scsi_end_request 699 2.4271
8013bf10 end_buffer_io_kiobuf 1672 26.1250
8013bfc0 brw_kiovec 1906 2.2909
801cb4e0 __make_request 10495 6.4308
80105220 default_idle 84418 1319.0312
00000000 total 103516 0.0560
- O_NOCOPY hack: (userspace doesn't actually get the read data)
801f9400 scsi_init_io_vc 785 2.1332
8013c840 try_to_free_buffers 950 2.6989
801f72a0 __scsi_end_request 966 3.3542
801cbb40 generic_make_request 1017 3.5312
8013bf10 end_buffer_io_kiobuf 1672 26.1250
8013a190 end_buffer_io_async 1693 8.8177
8013bfc0 brw_kiovec 1906 2.2909
801cb4e0 __make_request 13682 8.3836
80105220 default_idle 112345 1755.3906
00000000 total 144891 0.0784
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Tue May 14 2002 - 12:00:13 EST