I am sorry I can not do much for 2.5 at the moment.
Please revert to 2.4.19-pre7 plus my mondo patch.
bp6:~ # uname -a
Linux bp6 2.4.19-pre7 #1 SMP Tue May 7 12:57:46 PDT 2002 i686 unknown
00:13.0 Unknown mass storage controller: Triones Technologies, Inc. HPT366 (rev 01)
Flags: bus master, medium devsel, latency 120, IRQ 18
I/O ports at d800 [size=8]
I/O ports at dc00 [size=4]
I/O ports at e000 [size=256]
Expansion ROM at ea000000 [disabled] [size=128K]
00:13.1 Unknown mass storage controller: Triones Technologies, Inc. HPT366 (rev 01)
Flags: bus master, medium devsel, latency 120, IRQ 18
I/O ports at e400 [size=8]
I/O ports at e800 [size=4]
I/O ports at ec00 [size=256]
HPT366: onboard version of chipset, pin1=1 pin2=2
HPT366: IDE controller on PCI bus 00 dev 98
PCI: Enabling device 00:13.0 (0005 -> 0007)
HPT366: chipset revision 1
HPT366: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:pio
HPT366: IDE controller on PCI bus 00 dev 99
HPT366: chipset revision 1
HPT366: not 100% native mode: will probe irqs later
ide1: BM-DMA at 0xec00-0xec07, BIOS settings: hdc:DMA, hdd:pio
hda: DupliDisk IDE RAID-1 Adapter( 1.19), ATA DISK drive
hdc: QUANTUM FIREBALLP KA13.6, ATA DISK drive
ide2: ports already in use, skipping probe
ide0 at 0xd800-0xd807,0xdc02 on irq 18
ide1 at 0xe400-0xe407,0xe802 on irq 18
hda: host protected area => 1
hda: setmax LBA 18041184, native 18039168
hda: 18039168 sectors (9236 MB) w/371KiB Cache, CHS=17896/16/63, UDMA(66)
hdc: host protected area => 1
hdc: 27068420 sectors (13859 MB) w/371KiB Cache, CHS=26853/16/63, UDMA(66)
ide-floppy driver 0.99.newide
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 p6 p7 p8 >
/dev/ide/host1/bus0/target0/lun0: unknown partition table
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
loop: loaded (max 8 devices)
If it still fails it is a driver-chipset problem.
If it works in 2.4 but fails in 2.5 gawd only knows what is the issue.
On Sat, 11 May 2002, Pierre Rousselet wrote:
> Andre Hedrick wrote:
> > You have to specify which of the 6 revisions of the chipset you have.
> > Also in some cases which of the 13 sub-revisions, and the latter is
> > determined by the sub-vender-device.
>
> hde is ST310212A UDMA(66), hdg is SAMSUNG SV0322A UDMA(33) (motherboard
> BE6).
>
> # lspci -v gives (2.5.14 PCI_NAMES not set) :
>
> 00:13.0 Unknown mass storage controller: Triones Technologies, Inc.
> HPT366 (rev 01)
> Flags: bus master, medium devsel, latency 120, IRQ 11
> I/O ports at cc00 [size=8]
> I/O ports at d000 [size=4]
> I/O ports at d400 [size=256]
> Expansion ROM at <unassigned> [disabled] [size=128K]
>
> 00:13.1 Unknown mass storage controller: Triones Technologies, Inc.
> HPT366 (rev 01)
> Flags: bus master, medium devsel, latency 120, IRQ 11
> I/O ports at d800 [size=8]
> I/O ports at dc00 [size=4]
> I/O ports at e000 [size=256]
>
> # scanpci -v:
>
> pci bus 0x0000 cardnum 0x13 function 0x00: vendor 0x1103 device 0x0004
> Device unknown
> STATUS 0x0200 COMMAND 0x0005
> CLASS 0x01 0x80 0x00 REVISION 0x01
> BIST 0x00 HEADER 0x80 LATENCY 0x78 CACHE 0x08
> BASE0 0x0000cc01 addr 0x0000cc00 I/O
> BASE1 0x0000d001 addr 0x0000d000 I/O
> BASE4 0x0000d401 addr 0x0000d400 I/O
> MAX_LAT 0x08 MIN_GNT 0x08 INT_PIN 0x01 INT_LINE 0x0b
> BYTE_0 0x10c9a731 BYTE_1 0x00 BYTE_2 0x80736b0 BYTE_3 0xffffffff
>
> pci bus 0x0000 cardnum 0x13 function 0x01: vendor 0x1103 device 0x0004
> Device unknown
> STATUS 0x0200 COMMAND 0x0007
> CLASS 0x01 0x80 0x00 REVISION 0x01
> BIST 0x00 HEADER 0x80 LATENCY 0x78 CACHE 0x08
> BASE0 0x0000d801 addr 0x0000d800 I/O
> BASE1 0x0000dc01 addr 0x0000dc00 I/O
> BASE4 0x0000e001 addr 0x0000e000 I/O
> MAX_LAT 0x08 MIN_GNT 0x08 INT_PIN 0x02 INT_LINE 0x0b
> BYTE_0 0x10caa731 BYTE_1 0x00 BYTE_2 0x8073a28 BYTE_3 0xffffffff
>
> # cat /proc/ide/hpt366 :
> HighPoint HPT366/368/370
>
> Controller: 0
> Chipset: HPT366
> --------------- Primary Channel --------------- Secondary Channel
> --------------
> Enabled: yes yes
> --------------- drive0 --------- drive1 ------- drive0 ---------- drive1
> -------
> DMA capable: yes no no no
> Mode: UDMA off off off
>
> Controller: 1
> Chipset: HPT366
> --------------- Primary Channel --------------- Secondary Channel
> --------------
> Enabled: yes yes
> --------------- drive0 --------- drive1 ------- drive0 ---------- drive1
> -------
> DMA capable: yes no no no
> Mode: UDMA off off off
>
> --
> Pierre
> ------------------------------------------------
> Pierre Rousselet <pierre.rousselet@wanadoo.fr>
> ------------------------------------------------
>
Andre Hedrick
LAD Storage Consulting Group
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Tue May 14 2002 - 12:00:17 EST