> If that's a bad cable, why it is only happens when both drives are working
> in DMA mode?
Because, as you probably know, cable problems usually manifest themselves
during high transfer rates, where DMA is the prerequisite. Up to ATA33, you
might nearly hook your drives up using a shoelace w/o running into trouble,
ATA66+, however, seems to be very sensitive to good cabling.
How about trying out what Andre Hedrick's convert.10 has to say about your
setup if you're convinced the cable is ok?
T.
Sidenote: I'd recommend putting the two drives on separate channels, you're
losing quite a bit of performance this way when doing hda<->hdb transfers.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Thu May 23 2002 - 22:00:29 EST