В Вск, 09.06.2002, в 02:50, Andries.Brouwer@cwi.nl написал:
> From: Borsenkow Andrej <Andrej.Borsenkow@mow.siemens.ru>
>
> It looks like a media went corrupted so one expects some reasonable
> error message. What happens is I get endless loop in SCSI error recovery
> thread. The only way to clear up situation is to reboot
>
> That is the normal situation. I have never seen the SCSI error handler
> do anything else but bring down the system. Commenting it out
> really increases the stability of Linux (on my hardware).
>
MAINTAINERS:
SCSI SUBSYSTEM
L: linux-scsi@vger.kernel.org
S: Unmaintained
Oh, well ...
> Hmm. It is clear what happens.
> You are in scsi_error.c:scsi_send_eh_cmnd() and send a command,
> the return status is NEEDS_RETRY, and the same command is sent again. Etc.
>
> Now retrying is evil, and trying more than three times almost always
> stupid, so if you add in this function
>
> int retry_count = 0;
>
> and
>
> retry:
> if (++retry_count > 3) {
> SCpnt->eh_state = FAILED;
> return;
> }
>
> that would surely be an improvement locally.
> Globally one wonders: there is a retry count already - why isn't it
> honoured by everybody involved? (But it isnt - it is only used in
> scsi_decide_disposition().)
>
Which actually looks like an oversight ... and comments in unjam_host
loop even indicate this must be used.
Anyway, returning FAILED does not look right here. As long as I
understand what happens, FAILED means hard error (like failing to
communicate with device) while here we have more or less "soft" error.
So I decided to copy relevant bits from scsi_decide_disposition into
scsi_eh_completed_normally which resulted in pretty nice overall error
handling:
Jun 9 19:30:45 localhost kernel: Activating command for device 4 (1)
Jun 9 19:30:45 localhost kernel: Doing sd request, dev = 0x804, block = 944448
Jun 9 19:30:45 localhost kernel: sda : real dev = /dev/0, block = 944480
Jun 9 19:30:45 localhost kernel: sda : reading 8/8 512 byte blocks.
Jun 9 19:30:45 localhost kernel: Adding timer for command cfe5a000 at 6000 (d2a13964)
Jun 9 19:30:45 localhost kernel: scsi_dispatch_cmnd (host = 0, channel = 0, target = 4, command = cfe5a058, buffer = ca4d4000,
Jun 9 19:30:45 localhost kernel: bufflen = 4096, done = d2813b84)
Jun 9 19:30:45 localhost kernel: queuecommand : routine at d2a38292
Jun 9 19:30:45 localhost kernel: leaving scsi_dispatch_cmnd()
Jun 9 19:30:47 localhost kernel: Clearing timer for command cfe5a000 1
Jun 9 19:30:47 localhost kernel: Command failed cfe5a000 2 active=1 busy=1 failed=0
Jun 9 19:30:47 localhost kernel: bh08:04: old sense key None
Jun 9 19:30:47 localhost kernel: Non-extended sense class 0 code 0x0
Jun 9 19:30:47 localhost kernel: Waking error handler thread (-1)
Jun 9 19:30:47 localhost kernel: Error handler waking up
Jun 9 19:30:47 localhost kernel: scsi_unjam_host: Checking to see if we need to request sense
Jun 9 19:30:47 localhost kernel: scsi_unjam_host: Requesting sense for 4
Jun 9 19:30:47 localhost kernel: Adding timer for command cfe5a000 at 1000 (d2a13af8)
Jun 9 19:30:47 localhost kernel: In eh_done cfe5a000 result:0
Jun 9 19:30:47 localhost kernel: send_eh_cmnd: cfe5a000 eh_state:2002
Jun 9 19:30:47 localhost kernel: scsi_send_eh_cmnd: scsi_eh_completed_normally 2002
Jun 9 19:30:47 localhost kernel: Sense requested for cfe5a000 - result 2
Jun 9 19:30:47 localhost kernel: Info fld=0xe6960, Current bh08:04: sense key Medium Error
Jun 9 19:30:47 localhost kernel: Additional sense indicates Address mark not found for data field
Jun 9 19:30:47 localhost kernel: Adding timer for command cfe5a000 at 6000 (d2a13af8)
Jun 9 19:30:49 localhost kernel: In eh_done cfe5a000 result:2
Jun 9 19:30:49 localhost kernel: send_eh_cmnd: cfe5a000 eh_state:2002
Jun 9 19:30:49 localhost kernel: scsi_send_eh_cmnd: scsi_eh_completed_normally 2001
Jun 9 19:30:49 localhost kernel: Adding timer for command cfe5a000 at 6000 (d2a13af8)
Jun 9 19:30:51 localhost kernel: In eh_done cfe5a000 result:2
Jun 9 19:30:51 localhost kernel: send_eh_cmnd: cfe5a000 eh_state:2002
Jun 9 19:30:51 localhost kernel: scsi_send_eh_cmnd: scsi_eh_completed_normally 2001
Jun 9 19:30:51 localhost kernel: Adding timer for command cfe5a000 at 6000 (d2a13af8)
Jun 9 19:30:53 localhost kernel: In eh_done cfe5a000 result:2
Jun 9 19:30:53 localhost kernel: send_eh_cmnd: cfe5a000 eh_state:2002
Jun 9 19:30:53 localhost kernel: scsi_send_eh_cmnd: scsi_eh_completed_normally 2001
Jun 9 19:30:53 localhost kernel: Adding timer for command cfe5a000 at 6000 (d2a13af8)
Jun 9 19:30:55 localhost kernel: In eh_done cfe5a000 result:2
Jun 9 19:30:55 localhost kernel: send_eh_cmnd: cfe5a000 eh_state:2002
Jun 9 19:30:55 localhost kernel: scsi_send_eh_cmnd: scsi_eh_completed_normally 2002
Jun 9 19:30:55 localhost kernel: Total of 0+0 commands on 0 devices require eh work
Jun 9 19:30:55 localhost kernel: Adding timer for command cfe5a000 at 100 (d2a13af8)
Jun 9 19:30:55 localhost kernel: Clearing timer for command cfe5a000 1
Jun 9 19:30:55 localhost kernel: scsi_error.c: Waking up host to restart
Jun 9 19:30:55 localhost kernel: Error handler sleeping
Jun 9 19:30:55 localhost kernel: Command finished 1 0 0x2
Jun 9 19:30:55 localhost kernel: Notifying upper driver of completion for device 4 8000002
Jun 9 19:30:55 localhost kernel: sda : rw_intr(0, 8000002 [f0 3])
Jun 9 19:30:55 localhost kernel: scsi0: ERROR on channel 0, id 4, lun 0, CDB: Read (10) 00 00 0e 69 60 00 00 08 00
Jun 9 19:30:55 localhost kernel: Info fld=0xe6960, Current sd08:04: sense key Medium Error
Jun 9 19:30:55 localhost kernel: Additional sense indicates Address mark not found for data field
Jun 9 19:30:55 localhost kernel: I/O error: dev 08:04, sector 944448
Jun 9 19:30:55 localhost kernel: Deactivating command for device 4 (active=0, failed=0)
Jun 9 19:30:55 localhost kernel: Open returning 1
Jun 9 19:30:55 localhost kernel: Trying ioctl with scsi command 30
Jun 9 19:30:55 localhost kernel: scsi_do_req (host = 0, channel = 0 target = 4, buffer =00000000, bufflen = 0, done = d2a0f088, timeout = 1000, retries = 5)
Jun 9 19:30:55 localhost kernel: command : 1e 00 00 00 00 00
Jun 9 19:30:55 localhost kernel: Activating command for device 4 (1)
Jun 9 19:30:55 localhost kernel: Leaving scsi_init_cmd_from_req()
Jun 9 19:30:55 localhost kernel: Adding timer for command cfe5a000 at 1000 (d2a13964)
Jun 9 19:30:55 localhost kernel: scsi_dispatch_cmnd (host = 0, channel = 0, target = 4, command = cfe5a058, buffer = 00000000,
Jun 9 19:30:55 localhost kernel: bufflen = 0, done = d2a0f088)
Jun 9 19:30:55 localhost kernel: queuecommand : routine at d2a38292
Jun 9 19:30:55 localhost kernel: leaving scsi_dispatch_cmnd()
Jun 9 19:30:55 localhost kernel: Leaving scsi_do_req()
Jun 9 19:30:55 localhost kernel: Clearing timer for command cfe5a000 1
Jun 9 19:30:55 localhost kernel: Command finished 1 0 0x0
Jun 9 19:30:55 localhost kernel: Notifying upper driver of completion for device 4 0
Jun 9 19:30:55 localhost kernel: Deactivating command for device 4 (active=0, failed=0)
Jun 9 19:30:55 localhost kernel: Ioctl returned 0x0
Jun 9 19:30:55 localhost kernel: IOCTL Releasing command
> Where did we get this NEEDS_RETRY in the first place?
> Well, scsi_check_sense() will return NEEDS_RETRY for MEDIUM_ERROR.
> (Bad: the hardware also did retry many times already; it is usually very
> counterproductive to keep on hitting the same bad spot on the media.)
>
I do not dare to touch it. Whoever wrote the code must have some reasons
behind. Still, the obvious patch the shuts at least this code path
follows.
-andrej
> There are also other code paths that will loop, but this one
> looks most likely here.
>
> Andries
>
--- linux-2.4.18-18mdk/drivers/scsi/scsi_error.c.scsi-eh-timeout Thu May 30 16:22:37 2002
+++ linux-2.4.18-18mdk/drivers/scsi/scsi_error.c Sun Jun 9 19:18:11 2002
@@ -1100,6 +1100,8 @@
*/
STATIC int scsi_eh_completed_normally(Scsi_Cmnd * SCpnt)
{
+ int rtn;
+
/*
* First check the host byte, to see if there is anything in there
* that would indicate what we need to do.
@@ -1113,14 +1115,18 @@
* otherwise we just flag it as success.
*/
SCpnt->flags &= ~IS_RESETTING;
- return NEEDS_RETRY;
+ goto maybe_retry;
}
/*
* Rats. We are already in the error handler, so we now get to try
* and figure out what to do next. If the sense is valid, we have
* a pretty good idea of what to do. If not, we mark it as failed.
*/
- return scsi_check_sense(SCpnt);
+ rtn = scsi_check_sense(SCpnt);
+ if (rtn == NEEDS_RETRY) {
+ goto maybe_retry;
+ }
+ return rtn;
}
if (host_byte(SCpnt->result) != DID_OK) {
return FAILED;
@@ -1139,7 +1145,11 @@
case COMMAND_TERMINATED:
return SUCCESS;
case CHECK_CONDITION:
- return scsi_check_sense(SCpnt);
+ rtn = scsi_check_sense(SCpnt);
+ if (rtn == NEEDS_RETRY) {
+ goto maybe_retry;
+ }
+ return rtn;
case CONDITION_GOOD:
case INTERMEDIATE_GOOD:
case INTERMEDIATE_C_GOOD:
@@ -1154,6 +1164,17 @@
return FAILED;
}
return FAILED;
+
+ maybe_retry:
+
+ if ((++SCpnt->retries) < SCpnt->allowed) {
+ return NEEDS_RETRY;
+ } else {
+ /*
+ * No more retries - report this one back to upper level.
+ */
+ return SUCCESS;
+ }
}
/*
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sat Jun 15 2002 - 22:00:14 EST