Dear Micheal,
Thanks for the solution again, it seems i dont
have any luck. I have patched the kernel with
BLIST_LARGELUN support I have tried all the options
given by u
still success is far away from me. I have made
these changes in the scsi_scan.c
{"IBM", "AuSaV1S2", "*", BLIST_LARGELUN |
BLIST_FORCELUN | BLIST_SPARSELUN},
{"HITACHI", "OPEN E*4", "*", BLIST_LARGELUN |
BLIST_FORCELUN | BLIST_SPARSELUN},
{"HITACHI", "OPEN E*18", "*", BLIST_LARGELUN |
BLIST_FORCELUN | BLIST_SPARSELUN},
{"HITACHI", "OPEN E*8", "*", BLIST_LARGELUN |
BLIST_FORCELUN | BLIST_SPARSELUN},
{"HITACHI", "OPEN E*36", "*", BLIST_LARGELUN |
BLIST_FORCELUN | BLIST_SPARSELUN},
I tried all the possible combination of
BLIST_SPARCE, BLIST_FORCE, etc.
I would like to know whether the LINUX works on SAN
envirnment. I am feeling it has its own limitation
in SAN.
If any one can help to solve my problem it will be a
great help.
To my strange experiance RedHat 6.2 with kernel
2.2-14 without SMP options works fine, withot LUNO
and without luns biengin sequence but we require
multiple cpu option
if RedHat 6.2 works fine i dont know why it is
not implemented in RedHat 7.X. I have tried allthe
possible Redhat vesions
Including the latest RedHat 7.3. To my suprise the
RedHat does not boot at all if the qlogic driver is
enabled at boot.
and have the same problem of LUN0 and sequence
LUNs. Is really Linux operating sytem is matured
enough to work as high end
server????
Pl can any body help???
The details of machine
uname -a Linux m1 2.4.19-pre10 #12 SMP Thu Jun 13
05:48:37 IST 2002 i686 unknown
cat /proc/scsi/scsi
Attached devices:
Host: scsi2 Channel: 00 Id: 00 Lun: 00
Vendor: IBM Model: SERVERAID Rev: 1.00
Type: Direct-Access ANSI SCSI
revision: 02
Host: scsi2 Channel: 00 Id: 15 Lun: 00
Vendor: IBM Model: SERVERAID Rev: 1.00
Type: Processor ANSI SCSI
revision: 02
Host: scsi2 Channel: 01 Id: 08 Lun: 00
Vendor: IBM Model: AuSaV1S2 Rev: 0
Type: Processor ANSI SCSI
revision: 02
Host: scsi3 Channel: 00 Id: 00 Lun: 00
Vendor: HITACHI Model: OPEN-E*4 Rev: 0116
Type: Direct-Access ANSI SCSI
revision: 02
Host: scsi3 Channel: 00 Id: 00 Lun: 01
Vendor: HITACHI Model: OPEN-E*4 Rev: 0116
Type: Direct-Access ANSI SCSI
revision: 02
Host: scsi3 Channel: 00 Id: 00 Lun: 02
Vendor: HITACHI Model: OPEN-E*36 Rev: 0116
Type: Direct-Access ANSI SCSI
revision: 02
Host: scsi3 Channel: 00 Id: 00 Lun: 03
Vendor: HITACHI Model: OPEN-E*18 Rev: 0116
Type: Direct-Access ANSI SCSI
revision: 02
Host: scsi3 Channel: 00 Id: 00 Lun: 04
Vendor: HITACHI Model: OPEN-E*2 Rev: 0116
Type: Direct-Access ANSI SCSI
revision: 02
cat /proc/partition
major minor #blocks name rio rmerge rsect ruse
wio wmerge wsect wuse running use aveq
8 0 35548160 sda 4426 7059 90710 33350 4064
4259 66776 78920 0 36970 112310
8 1 5168614 sda1 4135 6674 86466 30360 2569
3334 47464 57210 0 30850 87600
8 2 23554944 sda2 268 299 3978 2880 1491 922
19280 21680 0 14080 24560
8 3 2096262 sda3 3 0 24 30 0 0 0 0 0 30 30
8 4 1 sda4 0 0 0 0 0 0 0 0 0 0 0
8 5 4720558 sda5 18 80 226 60 4 3 32 40 0 90
100
8 16 56905920 sdb 1 3 8 0 0 0 0 0 0 0 0
8 17 56902198 sdb1 0 0 0 0 0 0 0 0 0 0 0
8 32 56905920 sdc 1 3 8 0 0 0 0 0 0 0 0
8 33 2097136 sdc1 0 0 0 0 0 0 0 0 0 0 0
8 48 512153280 sdd 1 3 8 0 0 0 0 0 0 0 0
8 49 512152168 sdd1 0 0 0 0 0 0 0 0 0 0 0
8 64 256076640 sde 1 3 8 0 0 0 0 0 0 0 0
8 65 51207156 sde1 0 0 0 0 0 0 0 0 0 0 0
8 80 28452960 sdf 1 3 8 0 0 0 0 0 0 0 0
8 81 28452848 sdf1 0 0 0 0 0 0 0 0 0 0 0
3 0 653856 hda 1 3 16 30 0 0 0 0 -1145
643450 13929193
--- Michael Clark <michael@metaparadigm.com> wrote:
> Did you try BLIST_SPARSELUN on the Hitachi
> devices?
>
> Also, your devices are reporting as SCSI level 2 so
> no scanning will be done past lun 7 (This is only
> done for SCSI-3 devices). There is a patch
> floating around that adds BLIST_LARGELUN
> to make the scanning code treat these devices
> as SCSI-3 (255 luns)
>
> ~mc
>
> On 06/10/02 22:21, manjuanth n wrote:
>
> >Dear Michael,
> >
> >Thanks for the solution, but my problem still
> >remains unresolved. I added the following lines
> to
> > scsi_scan.c and recompiled
> > {"IBM", "AvSaV1S2", "*", BLIST_FORCELUN |
> >BLIST_SPARSELUN},
> > {"HITACHI", "OPEN E*4", "*",
> BLIST_FORCELUN},
> > {"HITACHI", "OPEN E*18", "*",
> BLIST_FORCELUN},
> > {"HITACHI", "OPEN E*8", "*",
> BLIST_FORCELUN},
> > {"HITACHI", "OPEN E*36", "*",
> BLIST_FORCELUN},
> > {"HITACHI", "DF400", "*", BLIST_FORCELUN},
> > {"HITACHI", "DF500", "*", BLIST_FORCELUN},
> > {"HITACHI", "DF600", "*", BLIST_FORCELUN},
> >
> > the out put of the scsi venders are as follows
> > cat /proc/scsi/scsi
> >Attached devices:
> >Host: scsi2 Channel: 00 Id: 00 Lun: 00
> > Vendor: IBM Model: SERVERAID Rev:
> 1.0
> > Type: Direct-Access ANSI
> SCSI
> >revision: 01
> >Host: scsi2 Channel: 00 Id: 15 Lun: 00
> > Vendor: IBM Model: SERVERAID Rev:
> 1.0
> > Type: Processor ANSI
> SCSI
> >revision: 01
> >Host: scsi2 Channel: 01 Id: 08 Lun: 00
> > Vendor: IBM Model: AuSaV1S2 Rev: 0
> > Type: Processor ANSI
> SCSI
> >revision: 02
> >Host: scsi3 Channel: 00 Id: 00 Lun: 00
> > Vendor: HITACHI Model: OPEN-E*4 Rev:
> 0116
> > Type: Processor ANSI
> SCSI
> >revision: 02
> >
> >If u can help me out where i am doing the mistake
>
> >it will be of great help.
> >plfind the enclosed scsi_scan.c file. Is there any
> >method or commands to find out BLIST_FORCELUN is
> >enabled?
> >
> > Thanks and regards
> >Manjunath
> >
> >
> >--- Michael Clark <michael@metaparadigm.com> wrote:
> >
> >
> >>2.4.18 needs a hint added to
> >>drivers/scsi/scsi_scan.c
> >>to allow it to scan targets with sparse luns.
> >>
> >>Look in /proc/scsi/scsi for the vendor and model
> and
> >>add them into the device_list array in scsi_scan.c
> >>
> >>...
> >>{"<VENDOR>", "<MODEL>", "*", BLIST_SPARSELUN},
> >>
> >>If you don't configure lun 0, you may have to use
> >>BLIST_FORCELUN which if my understanding is
> correct
> >>will force scanning of all luns.
> >>
> >>I hear there is some REPORT_LUNS code that will
> >>eliminate the need to do this, although don't know
> >>which kernel has it.
> >>
> >>~mc
> >>
> >>On 06/08/02 19:27, manjuanth n wrote:
> >>
> >>
> >>
> >>>Dear sir,
> >>>we have SAN environment with hitachi storage
> box
> >>>and brocade switch. we are trying to install
> >>>
> >>>
> >>Linux
> >>
> >>
> >>>with qlogic HBA card. we are facing strange
> >>>problems
> >>>1. If we disable LUN 0 we will not be able to
> >>>
> >>>
> >>see
> >>
> >>
> >>>any LUNs on liunx machine
> >>>2. If we enable LUN 0 we can see all the
> LUNS
> >>>but it should be in sequence i.e LUN0 ,1,2 , 3
>
> >>>
> >>>
> >>etc
> >>
> >>
> >>>if we disable LUN 3 we will not be able to see
> >>>
> >>>
> >>LUNS
> >>
> >>
> >>>4 and the rest
> >>>Is the above things are limitation of linux.
> >>>Linux machine is running with 2.4.18 kernel
> >>>
> >>>Is there any solutions for these problems?
> >>>
> >>>Thanks and Regards
> >>>Manjuanth
> >>>
> >>>
>
>>>__________________________________________________
> >>>Do You Yahoo!?
> >>>Yahoo! - Official partner of 2002 FIFA World Cup
> >>>http://fifaworldcup.yahoo.com
> >>>-
> >>>To unsubscribe from this list: send the line
> >>>
> >>>
> >>"unsubscribe linux-kernel" in
> >>
> >>
> >>>the body of a message to
> majordomo@vger.kernel.org
> >>>More majordomo info at
> >>>
> >>>
> >>http://vger.kernel.org/majordomo-info.html
> >>
> >>
> >>>Please read the FAQ at http://www.tux.org/lkml/
> >>>
> >>>
> >>>
> >>>
> >>
> >>
> >
> >
> >__________________________________________________
> >Do You Yahoo!?
> >Yahoo! - Official partner of 2002 FIFA World Cup
> >http://fifaworldcup.yahoo.com
> >
>
>------------------------------------------------------------------------
> >
> >/*
> > * scsi_scan.c Copyright (C) 2000 Eric Youngdale
> > *
> > * Bus scan logic.
> > *
> > * This used to live in scsi.c, but that file was
> just a laundry basket
> > * full of misc stuff. This got separated out in
> order to make things
> > * clearer.
> > */
> >
> >#define __NO_VERSION__
> >#include <linux/config.h>
> >#include <linux/module.h>
> >#include <linux/init.h>
> >
> >#include <linux/blk.h>
> >
> >#include "scsi.h"
> >#include "hosts.h"
> >#include "constants.h"
>
=== message truncated ===
--- Michael Clark <michael@metaparadigm.com> wrote:
> 2.4.18 needs a hint added to
> drivers/scsi/scsi_scan.c
> to allow it to scan targets with sparse luns.
>
> Look in /proc/scsi/scsi for the vendor and model and
> add them into the device_list array in scsi_scan.c
>
> ...
> {"<VENDOR>", "<MODEL>", "*", BLIST_SPARSELUN},
>
> If you don't configure lun 0, you may have to use
> BLIST_FORCELUN which if my understanding is correct
> will force scanning of all luns.
>
> I hear there is some REPORT_LUNS code that will
> eliminate the need to do this, although don't know
> which kernel has it.
>
> ~mc
>
> On 06/08/02 19:27, manjuanth n wrote:
>
> >Dear sir,
> > we have SAN environment with hitachi storage box
> >and brocade switch. we are trying to install
> Linux
> >with qlogic HBA card. we are facing strange
> >problems
> >1. If we disable LUN 0 we will not be able to
> see
> >any LUNs on liunx machine
> >2. If we enable LUN 0 we can see all the LUNS
> >but it should be in sequence i.e LUN0 ,1,2 , 3
> etc
> >if we disable LUN 3 we will not be able to see
> LUNS
> >4 and the rest
> > Is the above things are limitation of linux.
> >Linux machine is running with 2.4.18 kernel
> >
> >Is there any solutions for these problems?
> >
> >Thanks and Regards
> >Manjuanth
> >
> >
> >__________________________________________________
> >Do You Yahoo!?
> >Yahoo! - Official partner of 2002 FIFA World Cup
> >http://fifaworldcup.yahoo.com
> >-
> >To unsubscribe from this list: send the line
> "unsubscribe linux-kernel" in
> >the body of a message to majordomo@vger.kernel.org
> >More majordomo info at
> http://vger.kernel.org/majordomo-info.html
> >Please read the FAQ at http://www.tux.org/lkml/
> >
> >
>
>
__________________________________________________
Do You Yahoo!?
Yahoo! - Official partner of 2002 FIFA World Cup
http://fifaworldcup.yahoo.com
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sat Jun 15 2002 - 22:00:28 EST