On Sun, 23 Jun 2002, Dave Hansen wrote:
> William Lee Irwin III wrote:
> > On Sun, Jun 23, 2002 at 12:29:23AM -0700, Dave Hansen wrote:
> >> Yep, 2 independent busses per quad. That's a _lot_ of busses
> >> when you have an 8 or 16 quad system. (I wonder who has one of
> >> those... ;) Almost all of the server-type boxes that we play with
> >> have multiple PCI busses. Even my old dual-PPro has 2.
> >
> > I thought I saw 3 PCI and 1 ISA per-quad., but maybe that's the
> > "independent" bit coming into play.
> >
> Hmmmm. Maybe there is another one for the onboard devices. I thought
> that there were 8 slots and 4 per bus. I could
> be wrong. BTW, the ISA slot is EISA and as far as I can tell is only
> used for the MDC.
Do you mean independent in that there are 2 sets of 4 slots each
detected as a seperate PCI bus, or independent in that each set of 4
had *direct* access to the cpu side, and *does not* access via a
PCI:PCI bridge?
I have stacks of PPro/PII/Xeon boards around, but 9 out of 10 have
chianed buses. Even the old PPro x 6 (Avion 6600/ALR 6x6/Unisys
HR/HS6000) had 2 PCI buses, however the second BUS hung off of a
PCI:PCI bridge.
-- I route, therefore you are.- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sun Jun 23 2002 - 22:00:26 EST