Daniel Jacobowitz writes:
> On Mon, Jun 17, 2002 at 10:59:26AM +0400, Borsenkow Andrej wrote:
> > >>
> > >> I just booted into 2.4.19-pre10-ac2 for the first time, and noticed
> > >> something very odd: my disk activity light was flashing at about
> > >> half-second intervals, very regularly, and I could hear the disk
> > >> moving. I was only able to track it down to which disk controller, via
> > >> /proc/interrupts (are there any tools for monitoring VFS activity?
> > >> They'd be really useful). Eventually I hunted down the program causing
> > >> it: xmms.
> > >>
> > >> The reason turned out to be that I hadn't remembered to build my sound
> > >> driver for this kernel version. Every half-second xmms tried to open
> > >> /dev/mixer (and failed, ENOENT). Every time it did that there was
> > >> actual disk activity. Easily reproducible without xmms. Reproducible
> > >> on any non-existant device in devfs, but not for nonexisting files on
> > >> other filesystems. Is something bypassing the normal disk cache
> > >> mechanisms here? That doesn't seem right at all.
> > >>
> > >
> > >
> > >syslog activity from a printk, perhaps?
> >
> > No. It is most probably devfsd trying to load sound modules.
> >
> > This is exactly the reason Mandrake does not enable devfs in kernel-secure.
> > You can badly hit your system by doing in a loop ls /dev/foo for some device
> > foo that is configured for module autoloading.
> >
> > It is very fascist decision; the slightly more forgiving way is to disable
> > devfsd module autoloading (or disable devfsd entirely, just run it once
> > after all drivers are loaded to execute actions) but then you lose support
> > for hot plugging and some people do use kernel-secure on desktops.
>
> For the curious, the reason is that modprobe writes even failed
> attempts to a log in /var/log/ksymoops, and calls fdatasync() on
> that file afterwards. There is no way to disable this without
> removing that directory, as a design decision. I don't personally
> see the point in logging attempts which fail because there is no
> driver...
Sounds like the behaviour of modprobe needs to be fixed.
Regards,
Richard....
Permanent: rgooch@atnf.csiro.au
Current: rgooch@ras.ucalgary.ca
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sun Jun 30 2002 - 22:00:11 EST