Hi all
on my Supermicro Serverworks board
with an onboard Serverworks ide controller and
a Promise Ultra 133-TX2 ide controller
the kernel hangs when accessing an Iomega
Zip (Atapi) drive.
I've configured IDEDMA_ONLYDISK=y and
BLK_DEV_IDESCSI=y
This configuration works just fine with
a 2.4.18 kernel with the IDE-patches from
/pub/linux/kernel/people/hedrick/ide-2.4.18
on 2.4.19-pre3 till 2.4.19-rc1 I get
ide_dmaproc: chipset supported ide_dma_lostirq func only: 13
hdd: lost interrupt (that is the ZIP drive attached to the IDE bus)
Serverworks OSB4 in impossible state
Disable UDMA ....
Some time ago, Alan Cox replied
> There are a few wrinkles to iron out on the serverworks side yet.
Hopefully this happens before 2.4.19-final.
Many thanks,
Helmut Jarausch
Lehrstuhl fuer Numerische Mathematik
Institute of Technology, RWTH Aachen
D 52056 Aachen, Germany
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sun Jun 30 2002 - 22:00:11 EST