Re: Can't boot from /dev/md0 (RAID-1)

From: Roy Sigurd Karlsbakk (roy@karlsbakk.net)
Date: Sun Jun 30 2002 - 08:26:36 EST

> I assume the onboard IDE stuff (hdm) is something like a Promise
> controller. If so you should be able set the boot order to boot from the
> normal IDE chipset (hda/hdb). If doesn't help I'd suggest that you ask
> on the linux-raid mailing list.

The on-board is a VIA controller. see from lspci

00:0c.0 Unknown mass storage controller: Promise Technology, Inc. 20268 (rev
02)
00:0d.0 Unknown mass storage controller: Promise Technology, Inc. 20268 (rev
02)
00:0e.0 RAID bus controller: CMD Technology Inc PCI0649 (rev 02)
00:11.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 06)

and - as for linux-raid, see below:

   ----- The following addresses had permanent fatal errors -----
<linux-raid@vger.rutgers.edu>
    (reason: 550 5.1.1 <linux-raid@vger.rutgers.edu>... User unknown) 

-- 
Roy Sigurd Karlsbakk, Datavaktmester

Computers are like air conditioners.
They stop working when you open Windows.

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

This archive was generated by hypermail 2b29 : Sun Jun 30 2002 - 22:00:14 EST