see below for my original post
I've uploaded some files to http://karlsbakk.net/bugs/ that may help to
explain the problem. Still - I can't boot from nothing but floppy.
thanks
roy
On Sunday 30 June 2002 14:19, Roy Sigurd Karlsbakk wrote:
> hi
>
> I hope this is not OT - didn't find any LILO mailing list. after trying
> virtually everything - can anyone help me with a tip?
>
> Running 2.4.19-pre10-ac2, RedHat 7.3 (LILO version 21.4-4), I have root on
> /dev/md0 on RAID-1 on /dev/hda1 and /dev/hdb1. I've tried the howto at
> http://www.tldp.org/HOWTO/mini/Boot+Root+Raid+LILO-3.html#ss3.1, but it
> still doesn't help me. lilo just tells me "L 99 99 99 99 ..." some half a
> page, and then stops.I'm trying. All the time it prints this, it seems to
> be searching the floppy for some reason.
>
> The lilo.conf suggested by the above HOWTO, is this
>
> # lilo.conf.hda - primary ide master
> disk=/dev/md0
> bios=0x80
> sectors=63
> heads=16
> cylinders=39770
> partition=/dev/md1
> start=63
> boot=/dev/hda
> map=/boot/map
> install=/boot/boot.b
>
> image=/boot/bzImage
> root=/dev/md0
> read-only
> label=LinuxRaid
>
> sector/head/cylinder is corrected to the actual data reported from 'fdisk
> -ul'.
>
> When trying to set. boot=/dev/hdm (which is the first drive on the on-board
> chipset), lilo installs, and I get LI instead of L 99 99 ... Same result
> with LBA32.
>
> I also have another box with Linux, running SuSE 7.2 (LILO version 21.7-5)
> with RAID-1 on two drives. Here everything works fine
>
> thanks for all help
>
> roy
-- Roy Sigurd Karlsbakk, DatavaktmesterComputers are like air conditioners. They stop working when you open Windows.
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sun Jun 30 2002 - 22:00:15 EST