Hi,
This issue has all the hallmarks of PSU problems. I had the same issue running
dual Athlon MP's with a GeForce 4 Ti4600 until I switched the 400W PSU that
came with the case too an Enermax 550W beast. The basic Tyan approved PSU for
the 2460 is a M2463 (460W) unit when talking to my main vendor specifically
because of all the problems with lockups and failures to even POST (Power On
Self Test) etc.
Regards
Philip Wyett
On Sunday 30 Jun 2002 11:09 pm, Stephen Lee wrote:
> Ken,
> Try a different video card. My Dual Athlon system (A7M266-D)
> works like a charm with my GeForce 2 MX-400 but if I swap it with my
> GeForce 3 Ti500 the system will completely shutdown at some point
> (guaranteed). This happens with the system idle or while under a load.
>
> Steve
>
> -----Original Message-----
> From: linux-kernel-owner@vger.kernel.org
> [mailto:linux-kernel-owner@vger.kernel.org] On Behalf Of Ken Witherow
> Sent: Sunday, June 30, 2002 2:34 PM
> To: Jakob Oestergaard
> Cc: linux-kernel@vger.kernel.org
> Subject: Re: Tyan 2460/Dual Athlon MP hangs
>
> On Sun, 30 Jun 2002, Jakob Oestergaard wrote:
> > On Sun, Jun 30, 2002 at 02:55:18PM -0400, Ken Witherow wrote:
> > > [1.] One line summary of the problem:
> > > Random hangs occur on dual athlon system
> >
> > The 2460 systems (and many other dual athlon systems) are very
>
> sensitive
>
> > to temperature.
>
> seems to happen regardless of temperature. In fact, it most frequenly
> happens under no load. After doing some compiling, the current
> temperatures read CPU0: 131F/55C, CPU1: 136F/58C, MB: 122F/50C. At idle,
> they're normally in the 114/45, 120/48, 110/43 range respectively.
> Currenly at about 70 minutes of uptime with the longest being about 36
> hours.
>
> > > [2.] Full description of the problem/report:
> > > Sometimes the system hangs during boot, sometimes at the console and
> > > other times while I'm in X. Happens whether or not I use the
>
> mem=nopentium
>
> > > and noapic options. Frequently, I can't catch the OOPS because I'm
>
> in X
>
> > > and everything freezes.
> >
> > Can it happen during boot, if you let the system cool down for an hour
> > before powering it on ?
>
> I'll have to try letting it cool the next time it happens to see if that
> is indeed the cause.
>
> > Also be sure that the PSU is big enough.
>
> PSU is an Antec PP-412X 400 watt.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sun Jun 30 2002 - 22:00:15 EST