On Fri, Jun 21, 2002 at 11:31:40AM +0400, Andrey Nekrasov wrote:
> Hello.
>
> 1. My hardware:
>
> M/B Intel STL2:
> - ServerWorks ServerSet III LE chipset).
> - Integrated on-board Intel EtherExpress PRO100+ 10/100mbit PCI controller
> (Intel 82559)
>
>
> 2. Problem:
>
> 2.4.19pre10aa3 - load kernel & driver ok, work.
> ...
> Intel(R) PRO/100 Fast Ethernet Adapter - Loadable driver, ver 1.8.38 Copyright (c) 2002 Intel Corporation
> eth0: Intel(R) 8255x-based Ethernet Adapter
> Mem:0xfb101000 IRQ:18 Speed:100 Mbps Dx:Full
> Hardware receive checksums enabled cpu cycle saver enabled
> ...
>
>
> 2.4.19pre10aa4 :
> ....
> Intel(R) PRO/100 Fast Ethernet Adapter - Loadable driver, ver 2.0.30-k1
> Copyright (c) 2002 Intel Corporation
>
> hw init failed
> Failed to initialize e100, instance #0
> ....
>
>
> Whay?
because I upgreaded the driver to 2.0.30 from jam2. Due your report I
backed out 2.0.30 from rc1aa1 and I returned to 1.8.38.
Can you confirm rc1aa1 works again? in next -aa I'll upgrade again to
the 2.0.30-k release using another patch to see if it still malfunction
for you.
Andrea
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sun Jul 07 2002 - 22:00:15 EST