Vojtech Pavlik wrote:
> On Wed, Jul 17, 2002 at 02:55:21PM +0200, Petr Vandrovec wrote:
> > On 17 Jul 02 at 14:44, Vojtech Pavlik wrote:
> >
> > > > --- a/drivers/input/mouse/psmouse.c Wed Jul 17 12:19:13 2002
> > > > +++ b/drivers/input/mouse/psmouse.c Wed Jul 17 12:19:13 2002
> > > > @@ -142,7 +142,7 @@
> > > > */
> > > >
> > > > if (psmouse->type == PSMOUSE_IMEX) {
> > > > - input_report_rel(dev, REL_WHEEL, (int) (packet[3] & 8) - (int) (packet[2] & 7));
> > > > + input_report_rel(dev, REL_WHEEL, (int) (packet[3] & 8) - (int) (packet[3] & 7));
> > > > input_report_key(dev, BTN_SIDE, (packet[3] >> 4) & 1);
> > > > input_report_key(dev, BTN_EXTRA, (packet[3] >> 5) & 1);
> > > > }
> >
> > Hi,
> > any plans to support A4Tech mouse? It uses IMEX protocol, but
> >
> > switch(packet[3] & 0x0F) {
> > case 0: /* nothing */
> > case 1: vertical_wheel--; break;
> > case 2: horizontal_wheel++; break;
> > case 0xE: horizontal_wheel--; break;
> > case 0xF: vertical_wheel++; break;
> > }
> >
> > and obviously it never reports wheel move > 1 in one sample.
>
> Is there a way to detect whether it's an ImEx or A4? Or will we need a
> command line parameter ... ?
from http://home.t-online.de/home/gunther.mayer/gm_psauxprint-0.01.c :
char a4tech_id[]={ 0xf3,200, 0xf3,100, 0xf3,80, 0xf3,60, 0xf3,40, 0xf3,20};
if(a4tech) {
sendbuf(fd,f,a4tech_id,12);
buf[0]=0xf2;
write(fd,&buf,1);
b=consumefa(f);
printf("a4tech ID(f2) is %x\n",b);
if(b==6 || b==8) printf("AUTODETECT: a4tech\n");
// b=6: spiffy gyro-mouse "8D Profi-Mouse Point Stick"
// b=8: boeder Smartmouse Pro (4Button, 2Scrollwheel, 520dpi) PSM_4DPLUS_ID MOUSE_MODEL_4DPLUS
}
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Tue Jul 23 2002 - 22:00:23 EST