Patrick Mansfield:
> Also, cat /proc/scsi/scsi and /proc/scsi/qla*/[0-9] and see what they show.
test3:~# cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: DELL Model: PERCRAID Mirror Rev: 0001
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi1 Channel: 00 Id: 03 Lun: 00
Vendor: CNSi Model: G7324 Rev: L400
Type: Direct-Access ANSI SCSI revision: 03
test3:~# cat /proc/scsi/qla2200/1
QLogic PCI to Fibre Channel Host Adapter for ISP2100/ISP2200/ISP2200A:
Firmware version: 2.01.35, Driver version 5.31.RH1
Entry address = f8955060
HBA: QLA2200 , Serial# B50409
Request Queue = 0x36300000, Response Queue = 0x36ddc000
Request Queue count= 512, Response Queue count= 64
Number of pending commands = 0x0
Number of queued commands = 0x0
Number of free request entries = 494
Number of mailbox timeouts = 0
Number of ISP aborts = 0
Number of loop resyncs = 0
Number of retries for empty slots = 0
Number of reqs in retry_q = 0
Number of reqs in done_q = 0
Number of pending in_q reqs = 0
Host adapter: state = UP, flags= 0x20a0837
SCSI Device Information:
scsi-qla0-adapter-node=200000e08b02894b;
scsi-qla0-adapter-port=210000e08b02894b;
scsi-qla0-port-0=1000005013d01808:2000005013d01808;
scsi-qla0-port-1=1000005013d016d3:2000005013d016d3;
scsi-qla0-port-2=1000005013d0158d:2000005013d0158d;
scsi-qla0-port-3=1000005013d0154b:2000005013d0154b;
SCSI LUN Information:
(Id:Lun)
( 3: 0): Total reqs 12, Pending 0, Queued 0, full 0, flags 0x0, 0:0:82,
test3:~# cat /proc/scsi/qla2200/2
QLogic PCI to Fibre Channel Host Adapter for ISP2100/ISP2200/ISP2200A:
Firmware version: 2.01.35, Driver version 5.31.RH1
Entry address = f8955060
HBA: QLA2200 , Serial# B50405
Request Queue = 0x362e0000, Response Queue = 0x36d86000
Request Queue count= 512, Response Queue count= 64
Number of pending commands = 0x0
Number of queued commands = 0x0
Number of free request entries = 508
Number of mailbox timeouts = 0
Number of ISP aborts = 0
Number of loop resyncs = 0
Number of retries for empty slots = 0
Number of reqs in retry_q = 0
Number of reqs in done_q = 0
Number of pending in_q reqs = 0
Host adapter: state = UP, flags= 0x20a0837
SCSI Device Information:
scsi-qla1-adapter-node=200000e08b02854b;
scsi-qla1-adapter-port=210000e08b02854b;
scsi-qla1-port-0=1000005013d01808:2000005013d01808;
scsi-qla1-port-1=1000005013d016d3:2000005013d016d3;
scsi-qla1-port-2=1000005013d0158d:2000005013d0158d;
scsi-qla1-port-3=1000005013d0154b:2000005013d0154b;
SCSI LUN Information:
(Id:Lun)
Both controllers should find a disk now, really, but they don't.
Swapping to a newer version of the driver (6.0beta or 6.1beta)
will make it find one drive on each HBA, I'll do that tomorrow
along with logging stuff.
-- Thomas - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Tue Jul 23 2002 - 22:00:34 EST