Re: Linux 2.4.19-rc5-ac1 and Intel SCB2 (OSB5) trouble

From: Henning P. Schmiedehausen (hps@intermeta.de)
Date: Sun Aug 04 2002 - 07:24:27 EST

Hi,

> I am curious why the -ac PCI fixups didn't resolve this problem. Out of
> interest edit pci-i386.c and remove the IDE test in
> pcibios_assign_resources.

doing this:

  /* (class == PCI_CLASS_STORAGE_IDE && idx < 4) || */
if ((class == PCI_CLASS_DISPLAY_VGA && (r->flags & IORESOURCE_IO)))

in arch/i386/kernel/pci-i386.c

fixed the OSB5 IDE Controller:

SvrWks CSB5: IDE controller on PCI bus 00 dev 79
SvrWks CSB5: chipset revision 146
SvrWks CSB5: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x03a0-0x03a7, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x03a8-0x03af, BIOS settings: hdc:pio, hdd:pio

The lspci -vvx for the IDE south bridge now shows:

--- cut ---
00:0f.1 IDE interface: ServerWorks CSB5 IDE Controller (rev 92) (prog-if 8a [Master SecP PriP])
        Subsystem: Intel Corp.: Unknown device 3410
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64, cache line size 08
        Region 0: I/O ports at 1418 [size=8]
        Region 1: I/O ports at 1420 [size=4]
        Region 2: I/O ports at 1428 [size=8]
        Region 3: I/O ports at 1424 [size=4]
        Region 4: I/O ports at 03a0 [size=16]
        Region 5: I/O ports at 0410 [size=4]
00: 66 11 12 02 05 01 00 02 92 8a 01 01 08 40 80 00
10: 19 14 00 00 21 14 00 00 29 14 00 00 25 14 00 00
20: a1 03 00 00 11 04 00 00 00 00 00 00 86 80 10 34
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
--- cut ---

I did add some debugging to pci-i386.c, and it showed up nicely:

--- cut ---
hps -- We're checking Device ServerWorks CSB5 IDE Controller, Class is 257
hps -- Checking Resource # 0, c1e3145c (0 -> 7)
hps -- Assigning a Resource for Device ServerWorks CSB5 IDE Controller, Resource 0
hps -- Checking Resource # 1, c1e31478 (0 -> 3)
hps -- Assigning a Resource for Device ServerWorks CSB5 IDE Controller, Resource 1
hps -- Checking Resource # 2, c1e31494 (0 -> 7)
hps -- Assigning a Resource for Device ServerWorks CSB5 IDE Controller, Resource 2
hps -- Checking Resource # 3, c1e314b0 (0 -> 3)
hps -- Assigning a Resource for Device ServerWorks CSB5 IDE Controller, Resource 3
hps -- Checking Resource # 4, c1e314cc (3a0 -> 943)
hps -- Checking Resource # 5, c1e314e8 (410 -> 1043)
--- cut ---

So, you're correct, I'd have to spank my vendor. Can we get a
workaround for this device, though? The OSB5 seems to be common on
Intel OEM boards and lots of people will want to run linux on it.

How about the attached patch? This does the trick for me.

        Regards
                Henning 

-- 
Dipl.-Inf. (Univ.) Henning P. Schmiedehausen       -- Geschaeftsfuehrer
INTERMETA - Gesellschaft fuer Mehrwertdienste mbH     hps@intermeta.de

Am Schwabachgrund 22  Fon.: 09131 / 50654-0   info@intermeta.de
D-91054 Buckenhof     Fax.: 09131 / 50654-20
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/

This archive was generated by hypermail 2b29 : Wed Aug 07 2002 - 22:00:24 EST