Hi,
here is my 4th report since about 2.4.8:
You can reproduce the bug in a few steps if you have a kernel with
modules support for hfs.
1. Take a well formated hfs-floppy and mount the floppy
2. cd to the floppy and make a directory b
3. rm -r b
4. You'll get the following error message:
rm: cannot remove directory `b/.finderinfo': Operation not permitted
rm: cannot remove directory `b/.resource': Operation not permitted
5.You'll get a segmentation fault and an uninterruptible sleep for the
mount PID. You cannot use or unmount the drive again.
Regards
Wolfgang Pichler
syslog
Aug 5 11:07:51 pc kernel: kernel BUG in header file at line 247
Aug 5 11:07:51 pc kernel: kernel BUG at panic.c:141!
Aug 5 11:07:51 pc kernel: invalid operand: 0000
Aug 5 11:07:51 pc kernel: CPU: 0
Aug 5 11:07:51 pc kernel: EIP: 0010:[__out_of_line_bug+15/36] Not
tainted
Aug 5 11:07:51 pc kernel: EFLAGS: 00010282
Aug 5 11:07:51 pc kernel: eax: 00000026 ebx: c7526b40 ecx:
c387a000 edx: c64bddc0
Aug 5 11:07:51 pc kernel: esi: 00000001 edi: c5667e00 ebp:
c75265c0 esp: c387bf10
Aug 5 11:07:51 pc kernel: ds: 0018 es: 0018 ss: 0018
Aug 5 11:07:51 pc kernel: Process rm (pid: 425, stackpage=c387b000)
Aug 5 11:07:51 pc kernel: Stack: c01e2660 000000f7 c8883e1f 000000f7
c39f585c c3bdf2dc c75265c0 c3bdf260
Aug 5 11:07:51 pc kernel: c5667e20 c3b40420 00000000 c39f57e0
c3b40400 0000bf07 63010200 00017265
Aug 5 11:07:51 pc kernel: c6fa0000 0000c015 0000c410 a0000000
bf8cc676 65c0c387 0000c752 c013ab1e
Aug 5 11:07:51 pc kernel: Call Trace:
[snd-mixer-oss:__insmod_snd-mixer-oss_O/lib/modules/2.4.19/misc/snd-mixer-+-53729/96]
[vfs_rmdir+326/428] [sys_rmdir+187/252] [system_call+51/64]
Aug 5 11:07:51 pc kernel:
Aug 5 11:07:51 pc kernel: Code: 0f 0b 8d 00 86 26 1e c0 eb fe 8d 74 26
00 8d bc 27 00 00 00
cat /proc/version
Linux version 2.4.19 (root@pc) (gcc version 2.95.4 (Debian prerelease))
#2 Son Aug 4 19:08:41 CEST 2002
cat /proc/modules
floppy 45792 2 (autoclean)
snd-mixer-oss 4672 0 (autoclean)
hfs 73600 1
ide-floppy 11712 0
ide-scsi 7584 0
scsi_mod 80824 1 [ide-scsi]
snd-seq-midi 3008 0 (autoclean) (unused)
snd-card-via686a 6688 0 (autoclean)
snd-ac97-codec 23200 0 (autoclean) [snd-card-via686a]
snd-mixer 22824 0 (autoclean) [snd-mixer-oss
snd-ac97-codec]
snd-pcm 29184 0 (autoclean) [snd-card-via686a]
snd-mpu401-uart 2256 0 (autoclean) [snd-card-via686a]
snd-rawmidi 9632 0 (autoclean) [snd-seq-midi
snd-mpu401-uart]
snd-seq-oss 23040 0 (unused)
snd-seq-midi-event 2880 0 [snd-seq-midi snd-seq-oss]
snd-seq 37584 0 [snd-seq-midi snd-seq-oss
snd-seq-midi-event]
snd-timer 8000 0 [snd-pcm snd-seq]
snd-seq-device 3740 0 [snd-seq-midi snd-rawmidi snd-seq-oss
snd-seq]
snd 31136 1 [snd-mixer-oss snd-seq-midi
snd-card-via686a snd-ac97-codec snd-mixer snd-pcm snd-mpu401-uart
snd-rawmidi snd-seq-oss snd-seq-midi-event snd-seq snd-timer
snd-seq-device]
soundcore 3492 5 [snd]
vfat 9276 0 (unused)
fat 29336 0 [vfat]
su1 lspci -vvv
00:00.0 Host bridge: VIA Technologies, Inc. VT8501 [Apollo MVP4] (rev
02)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 32
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M]
Capabilities: [a0] AGP version 2.0
Status: RQ=7 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
00:01.0 PCI bridge: VIA Technologies, Inc. VT8501 [Apollo MVP4 AGP]
(prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR+
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: e4000000-e7ffffff
Prefetchable memory behind bridge: fff00000-000fffff
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South]
(rev 14)
Subsystem: VIA Technologies, Inc. VT82C686/A PCI to ISA Bridge
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
ParErr- Stepping+ SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:07.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 06)
(prog-if 8a [Master SecP PriP])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Region 4: I/O ports at d000 [size=16]
00:07.2 USB Controller: VIA Technologies, Inc. UHCI USB (rev 06)
(prog-if 00 [UHCI])
Subsystem: Unknown device 0925:1234
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin D routed to IRQ 10
Region 4: I/O ports at d400 [size=32]
00:07.4 Host bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
(rev 10)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin ? routed to IRQ 9
00:07.5 Multimedia audio controller: VIA Technologies, Inc. AC97 Audio
Controller (rev 12)
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin C routed to IRQ 11
Region 0: I/O ports at dc00 [size=256]
Region 1: I/O ports at e000 [size=4]
00:08.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139
(rev 10)
Subsystem: Allied Telesyn International: Unknown device 2503
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 9
Region 0: I/O ports at e400 [size=256]
Region 1: Memory at e8000000 (32-bit, non-prefetchable)
[size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:00.0 VGA compatible controller: Trident Microsystems CyberBlade/i7
(rev 5b) (prog-if 00 [VGA])
Subsystem: Trident Microsystems CyberBlade i7 AGP
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e5800000 (32-bit, non-prefetchable)
[size=8M]
Region 1: Memory at e6000000 (32-bit, non-prefetchable)
[size=128K]
Region 2: Memory at e5000000 (32-bit, non-prefetchable)
[size=8M]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: [80] AGP version 1.0
Status: RQ=32 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
Capabilities: [90] Power Management version 1
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
cat /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 5
model : 8
model name : AMD-K6(tm) 3D processor
stepping : 12
cpu MHz : 451.042
cache size : 64 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr mce cx8 pge mmx syscall 3dnow
k6_mtrr
bogomips : 897.84
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Wed Aug 07 2002 - 22:00:26 EST