Hi,
Recently one of my harddisks began to develop bad sectors. I decided to add a
another disk to replace the disk and run pvmove -i to salvgage as much as
possible to the spare disk. But, the process takes seems to take ages. For
every bad sector pvmove encounters it takes 5 seconds for the kernel to
timeout and move on to the next sector. Some calculation would tell me that
it would take approx 6 years to go through the rest of the disk.
So, is there any way to speed up this? I was thinking in the ways of reducing
the 5 second timeout or having the disk driver simply skip the bad sectors.
These are the errors I get:
Aug 4 00:01:31 springbird kernel: hdc: dma_intr: status=0x51 { DriveReady
SeekComplete Error }
Aug 4 00:01:31 springbird kernel: hdc: dma_intr: error=0x40 {
UncorrectableError }, LBAsect=34880281, sector=34880218
Aug 4 00:01:31 springbird kernel: end_request: I/O error, dev 16:01 (hdc),
sector 34880218
Aug 4 00:01:36 springbird kernel: hdc: dma_intr: status=0x51 { DriveReady
SeekComplete Error }
Aug 4 00:01:36 springbird kernel: hdc: dma_intr: error=0x40 {
UncorrectableError }, LBAsect=34880283, sector=34880220
Aug 4 00:01:36 springbird kernel: end_request: I/O error, dev 16:01 (hdc),
sector 34880220
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Wed Aug 07 2002 - 22:00:27 EST