Data point:
I have a server and firewall using 2.4.19-pre2-ac4 with Linksys LNE100TX nic's
firewall is 6x86 on Intel 430VX uptime 146 days
server is PII on Intel 440BX uptime 83 days
both report the nic as:
Linksys Network Everywhere Fast Ethernet 10/100 model NC100 (rev 11)
both autonegotiate 100 full duplex with a Seimens 5 port 10/100 switch
Maybe Linksys used different chipsets in their LNE100TX, or some change
since 2.4.19-pre2-ac4 is a problem
On Sat, Aug 10, 2002 at 01:24:42PM -0400, Nilanjan Bhowmik wrote:
> This happend on a working machine. After I have upgraded to 2.4.19, tulip
> driver
> will not work. Only way to sync it is loading the driver couple of times
> and that too
> it will sync at 10/half.
>
> This is working fine with the 2.4.7-10 stock redhat kernel.
>
...
> 00:10.0 Ethernet controller: Lite-On Communications Inc LNE100TX [Linksys
> EtherFast 10/100] (rev 25)
>
> nilu@calculator.nilu.net-5->cat /proc/ioports
...
> 1400-14ff : Lite-On Communications Inc LNE100TX [Linksys EtherFast 10/100]
> 1400-14ff : tulip
...
This matches my /proc/ioports entry for tulip
If you want any more info, just ask...
Darrell
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Thu Aug 15 2002 - 22:00:22 EST