here comes my first kernel-bug-report.:
[1.] kernel oopses
[2.] my kernel 2.4.19 oopsed today and galeon crashed
[3.] kernel
[4.] Linux version 2.4.19 (root@yoda.phion) (gcc version 2.96 20000731
(Red Hat Linux 7.1 2.96-98)) #2 Wed Aug 7 11:39:04 CEST 2002
[5.] oops:
invalid operand: 0000
CPU: 0
EIP: 0010:[<c0131b10>] Tainted: PF
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00210286
eax: 00000000 ebx: c12ddd68 ecx: c02a0560 edx: 00000000
esi: 00000000 edi: 00000000 ebp: d266c38c esp: c6ef3e60
ds: 0018 es: 0018 ss: 0018
Process galeon-bin (pid: 7229, stackpage=c6ef3000)
Stack: 00000000 00000001 c013291b c02a0560 001b8900 c148bd94 00000000
00000000
00000002 00000008 d266c38c c0127d78 00001b89 c6ef2000 00000000
001b8800
c0127de0 001b8800 00000001 408e3204 00000000 ce52dbe0 d754e3e0
c012825f
Call Trace: [<c013291b>] [<c0127d78>] [<c0127de0>] [<c012825f>]
[<d8979836>]
[<d8979931>] [<d89a5a00>] [<c0115845>] [<d89a5a00>] [<d88cc5c2>]
[<d88bc662>]
[<c0109e0a>] [<d89a5a00>] [<c010a02d>] [<c01156b0>] [<c0108ad0>]
Code: 0f 0b 5b 00 54 3f 26 c0 8b 15 10 56 30 c0 89 d8 29 d0 69 c0
>>EIP; c0131b10 <__free_pages_ok+30/290> <=====
Trace; c013291b <read_swap_cache_async+4b/a0>
Trace; c0127d78 <swapin_readahead+28/50>
Trace; c0127de0 <do_swap_page+40/150>
Trace; c012825f <handle_mm_fault+6f/f0>
Trace; d8979836 <[NVdriver]__nvsym00528+102/244>
Trace; d8979931 <[NVdriver]__nvsym00528+1fd/244>
Trace; d89a5a00 <[NVdriver]nv_linux_devices+0/4e0>
Trace; c0115845 <do_page_fault+195/4df>
Trace; d89a5a00 <[NVdriver]nv_linux_devices+0/4e0>
Trace; d88cc5c2 <[NVdriver]RmIsr+2e/4c>
Trace; d88bc662 <[NVdriver]nv_kern_isr+1e/c8>
Trace; c0109e0a <handle_IRQ_event+3a/70>
Trace; d89a5a00 <[NVdriver]nv_linux_devices+0/4e0>
Trace; c010a02d <do_IRQ+bd/f0>
Trace; c01156b0 <do_page_fault+0/4df>
Trace; c0108ad0 <error_code+34/40>
Code; c0131b10 <__free_pages_ok+30/290>
00000000 <_EIP>:
Code; c0131b10 <__free_pages_ok+30/290> <=====
0: 0f 0b ud2a <=====
Code; c0131b12 <__free_pages_ok+32/290>
2: 5b pop %ebx
Code; c0131b13 <__free_pages_ok+33/290>
3: 00 54 3f 26 add %dl,0x26(%edi,%edi,1)
Code; c0131b17 <__free_pages_ok+37/290>
7: c0 8b 15 10 56 30 c0 rorb $0xc0,0x30561015(%ebx)
Code; c0131b1e <__free_pages_ok+3e/290>
e: 89 d8 mov %ebx,%eax
Code; c0131b20 <__free_pages_ok+40/290>
10: 29 d0 sub %edx,%eax
Code; c0131b22 <__free_pages_ok+42/290>
12: 69 c0 00 00 00 00 imul $0x0,%eax,%eax
1 warning issued. Results may not be reliable.
[6.] sorry, don't know how to trigger the bug
[7.] Environment:
[7.1.] Linux yoda.phion 2.4.19 #2 Wed Aug 7 11:39:04 CEST 2002 i686
unknown
Gnu C 2.96
Gnu make 3.79.1
binutils 2.11.90.0.8
util-linux 2.11f
mount 2.10r
modutils 2.4.14
e2fsprogs 1.25
Linux C Library 2.2.4
Dynamic linker (ldd) 2.2.4
Procps 2.0.7
Net-tools 1.56
Console-tools 0.3.3
Sh-utils 2.0
Modules Loaded nls_cp437 vfat fat sg NVdriver vmnet vmmon
ide-scsi nls_iso8859-1 8139too mii agpgart loop cmpci mousedev hid input
usb-uhci usbcore
[7.2.] processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 8
model name : Celeron (Coppermine)
stepping : 6
cpu MHz : 801.850
cache size : 128 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 mmx fxsr sse
bogomips : 1599.07
[7.3.] nls_cp437 5120 0 (autoclean)
vfat 12604 0 (autoclean)
fat 38264 0 (autoclean) [vfat]
sg 31588 0 (autoclean)
NVdriver 1070368 15
vmnet 22624 5
vmmon 23060 6
ide-scsi 9824 0
nls_iso8859-1 3520 5 (autoclean)
8139too 17184 1 (autoclean)
mii 1980 0 (autoclean) [8139too]
agpgart 31136 5
loop 10544 15 (autoclean)
cmpci 35832 1
mousedev 5152 2
hid 21024 0 (unused)
input 5728 0 [mousedev hid]
usb-uhci 26468 0 (unused)
usbcore 80928 1 [hid usb-uhci]
[7.4.] 00000000-0009ffff : System RAM
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000d4000-000d47ff : Extension ROM
000f0000-000fffff : System ROM
00100000-17feffff : System RAM
00100000-0025779e : Kernel code
0025779f-002d9537 : Kernel data
17ff0000-17ff2fff : ACPI Non-volatile Storage
17ff3000-17ffffff : ACPI Tables
d0000000-d3ffffff : VIA Technologies, Inc. VT82C693A/694x [Apollo
PRO133x]
d4000000-d5ffffff : PCI Bus #01
d4000000-d4ffffff : nVidia Corporation Vanta [NV6]
d6000000-d7ffffff : PCI Bus #01
d6000000-d7ffffff : nVidia Corporation Vanta [NV6]
d9000000-d9000fff : Adaptec AHA-2940/2940W / AIC-7871
d9000000-d9000fff : aic7xxx
d9001000-d90010ff : Realtek Semiconductor Co., Ltd. RTL-8139/8139C
d9001000-d90010ff : 8139too
ffff0000-ffffffff : reserved
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
0330-0331 : cmpci Midi
0376-0376 : ide1
0388-038b : cmpci FM
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(auto)
0cf8-0cff : PCI conf1
d000-d00f : VIA Technologies, Inc. Bus Master IDE
d000-d007 : ide0
d008-d00f : ide1
d400-d41f : VIA Technologies, Inc. UHCI USB
d400-d41f : usb-uhci
d800-d8ff : Realtek Semiconductor Co., Ltd. RTL-8139/8139C
d800-d8ff : 8139too
dc00-dcff : Adaptec AHA-2940/2940W / AIC-7871
e000-e0ff : C-Media Electronics Inc CM8738
e000-e0ff : cmpci
[7.5.] 00:00.0 Host bridge: VIA Technologies, Inc. VT82C691 [Apollo PRO]
(rev 44)
Subsystem: Elitegroup Computer Systems: Unknown device 0954
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- Fast
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR
Latency: 0
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=64M]
Capabilities: [a0] AGP version 1.0
Status: RQ=7 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA- AGP+ 64bit- FW- Rate=x2
00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598 [Apollo MVP3 AGP]
(prog-if 00 [Normal decode
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- Fast
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: d4000000-d5ffffff
Prefetchable memory behind bridge: d6000000-d7ffffff
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.0 ISA bridge: VIA Technologies, Inc. VT82C596 ISA [Apollo PRO]
(rev 23)
Subsystem: VIA Technologies, Inc. VT82C596/A/B PCI to ISA Bridge
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping+ SERR- Fast
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR
Latency: 0
00:07.1 IDE interface: VIA Technologies, Inc. VT82C586 IDE [Apollo] (rev
10) (prog-if 8a [Master
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- Fast
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR
Latency: 32
Region 4: I/O ports at d000 [size=16]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.2 USB Controller: VIA Technologies, Inc. VT82C586B USB (rev 11)
(prog-if 00 [UHCI])
Subsystem: Unknown device 0925:1234
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- Fast
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR
Latency: 32, cache line size 08
Interrupt: pin D routed to IRQ 10
Region 4: I/O ports at d400 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.3 Host bridge: VIA Technologies, Inc.: Unknown device 3050 (rev
30)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- Fast
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR
00:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139
(rev 10)
Subsystem: Surecom Technology EP-320X-R
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- Fast
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR
Latency: 32 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 12
Region 0: I/O ports at d800 [size=256]
Region 1: Memory at d9001000 (32-bit, non-prefetchable)
[size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0c.0 SCSI storage controller: Adaptec AHA-294x / AIC-7871 (rev 03)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- Fast
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR
Latency: 32 (2000ns min, 2000ns max), cache line size 08
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at dc00 [disabled] [size=256]
Region 1: Memory at d9000000 (32-bit, non-prefetchable)
[size=4K]
Expansion ROM at <unassigned> [disabled] [size=64K]
00:0d.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev
10)
Subsystem: C-Media Electronics Inc CMI8738/C3DX PCI Audio Device
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- Fast
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR
Latency: 32 (500ns min, 6000ns max)
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at e000 [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:00.0 VGA compatible controller: nVidia Corporation Vanta [NV6] (rev
15) (prog-if 00 [VGA])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- Fast
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR
Latency: 248 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at d4000000 (32-bit, non-prefetchable)
[size=16M]
Region 1: Memory at d6000000 (32-bit, prefetchable) [size=32M]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: [60] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 2.0
Status: RQ=31 SBA- 64bit- FW- Rate=x1,x2
Command: RQ=7 SBA- AGP+ 64bit- FW- Rate=x2
[7.6.] Attached devices:
Host: scsi0 Channel: 00 Id: 01 Lun: 00
Vendor: YAMAHA Model: CRW8824S Rev: 1.00
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi1 Channel: 00 Id: 00 Lun: 00
Vendor: LITE-ON Model: LTR-32123S Rev: XS06
Type: CD-ROM ANSI SCSI revision: 02
[7.7.] my kernel is a patched one:
i use the preemptive kernel patch and have risen the standard number of
available loop-devices to 250.
yours
josef
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Thu Aug 15 2002 - 22:00:27 EST