[BUG] 2.5.31 doesn't boot - looks IDE related

From: Anton Altaparmakov (aia21@cantab.net)
Date: Tue Aug 13 2002 - 03:38:02 EST

Next message: Andrew Morton: "Re: [patch] __func__ -> __FUNCTION__"
Previous message: Adrian Bunk: "Re: Linux 2.4.20-pre2 compile error"
Next in thread: Adam J. Richter: "Re: [BUG] 2.5.31 doesn't boot - looks IDE related"
Maybe reply: Adam J. Richter: "Re: [BUG] 2.5.31 doesn't boot - looks IDE related"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Marcin,

2.5.31 dies with the last messages being:
[snip]
ATA/ATAPI device driver v7.0.0
ATA: PCI bus speed 33.3MHz
ATA: VIA Technologies, Inc. Bus Master IDE, PCI slot 00:07.1
ATA: chipset rev.: 6
ATA: non-legacy mode: IRQ probe delayed
VP_IDE: VIA vt82c686b (rev 40) ATA UDMA100 controller on PCI 00:07.1
ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:DMA, hdd:DMA
hda: IC35L040AVER07-0, DISK drive
hdc: LITE-ON LTR-12102B, ATAPI CD/DVD-ROM drive
hdd: Maxtor 90288D2, DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
<it is dead>

2.4.19 at the same place gives:
[snip]
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 39
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci00:07.1
ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:DMA, hdd:DMA
hda: IC35L040AVER07-0, ATA DISK drive
hdc: LITE-ON LTR-12102B, ATAPI CD/DVD-ROM drive
hdd: Maxtor 90288D2, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 80418240 sectors (41174 MB) w/1916KiB Cache, CHS=5005/255/63,
UDMA(100)
hdd: 5627664 sectors (2881 MB) w/256KiB Cache, CHS=5583/16/63, UDMA(33)
Partition check:
hda: hda1 hda2 < hda5 hda6 hda7 >
hdd: [PTBL] [697/128/63] hdd1 hdd2 < hdd5 hdd6 hdd7 hdd8 hdd9 hdd10 >
<and continues happily>

Looks like your domain... Any hope for having IDE working again soon?

I've got NTFS write code now and can't test it because I can't boot the
kernel! )-:

Perhaps I should just move all my development to 2.4 and forget 2.5...

-- Best regards,

Anton -- Anton Altaparmakov <aia21 at cantab.net> (replace at with @) Linux NTFS maintainer / IRC: #ntfs on irc.openprojects.net WWW: http://linux-ntfs.sf.net/, http://www-stu.christs.cam.ac.uk/~aia21/ - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/

Next message: Andrew Morton: "Re: [patch] __func__ -> __FUNCTION__"
Previous message: Adrian Bunk: "Re: Linux 2.4.20-pre2 compile error"
Next in thread: Adam J. Richter: "Re: [BUG] 2.5.31 doesn't boot - looks IDE related"
Maybe reply: Adam J. Richter: "Re: [BUG] 2.5.31 doesn't boot - looks IDE related"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

This archive was generated by hypermail 2b29 : Thu Aug 15 2002 - 22:00:31 EST