Message 2 in thread
Greg KH (greg@kroah.com) wrote:
> On Fri, Aug 02, 2002 at 03:47:51PM -0500, Stephen Cameron wrote:
> >
> > I just saw this problem with 2.5.30.
> >
> > I can't mount my 2nd volume on a cciss controller (SmartArray 5i)
> >
> > < /dev/cciss/c0d1p1
> > No such device or address
> >
> > The first volume, /dev/cciss/c0d0p1, works fine
> > (I'm booted from it.)
> >
> > Reboot 2.5.29, both volumes work fine.
> >
> > I don't have time to look into this right now,
> > but I thought I'd mention it in case someone else
> > does have time. Looks like there was some partition
> > code and/or devfs changes...
>
> Are you running in "devfs=only" mode? If so, the changes I made
> probably are the cause of this.
>
No. The changes that broke it are to do with the sizes[]
being gone, I think. That yours?
/dev/cciss/c0d1 shows up in /proc/partitions, but not
/dev/cciss/c0d1p1 or /dev/cciss/c0d1p7
All the partitions of /dev/cciss/c0d0 show up.
(still broken in 2.5.31, of course)
I'm having some trouble with instability of 2.5.3[01],
don't know if it's just life with 2.5, or maybe my userland
is too old for my kernel...(redhat 7.1) Anyway, it's
slowing me down, running fsck constantly after puking. :-(
-- steve
-
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Thu Aug 15 2002 - 22:00:32 EST