Re: can't use 2.4 on my 486 server

From: Jacek Popławski (jpopl@interia.pl)
Date: Wed Aug 14 2002 - 11:46:40 EST


On Wed, Aug 14, 2002 at 01:01:32PM +0100, Alan Cox wrote:
> Two things to check first: The memory (we've seen 2.4 find bad ram bugs
> 2.2 did not) and also that its getting the memory size right. 2.4 uses
> E820 then E801 memory sizing, older 2.2 (< 2.2.18 or so) didnt do this.
> So far I only know of one box that gets memory size wrong just with
> E820.

I haven't checked RAM with memtest, yet.

There is 16MB of RAM there.

jp@darkstar:~$ cat /proc/meminfo
        total: used: free: shared: buffers: cached:
Mem: 14778368 14372864 405504 10383360 372736 3284992
Swap: 21639168 196608 21442560
MemTotal: 14432 kB
MemFree: 396 kB
MemShared: 10140 kB
Buffers: 364 kB
Cached: 3208 kB
SwapTotal: 21132 kB
SwapFree: 20940 kB

(this is 2.2.19 raport)

> Finally what is plugged into it ?

This is Dell computer with video card on motherboard, without PCI slots.
There is one hard disk:

hda: ST3630A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: ST3630A, 601MB w/120kB Cache, CHS=1223/16/63

and one Ethernet:
eth0: 3c509 at 0x300 tag 1, 10baseT port, address 00 20 af 1b 91 55, IRQ 10.

There is also ppp connection by serial port (ericsson terminal called HIS).

No soundcard, no floppy, no other network devices.

-- 
http://decopter.sf.net - free unrealistic helicopter simulator
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Thu Aug 15 2002 - 22:00:36 EST