mingo@elte.hu said:
> while your patch looks OK, it would be *really* interesting to find
> out why the previous layout failed. Does the BIOS somehow corrupt the
> GDT? You are using the stock SMP code otherwise, correct? And this
> part of the patch:
Well, I should say, this is the voyager MCA box again...
The boot problem only happens with my quad pentium cards, the dyad pentium and
486 are fine. Originally, a voyager system with quad cards just wouldn't boot
(this was in the 2.2.x days). Eventually, by trial and error and long debug
of the boot process I discovered it would boot if the GDT was 8 bytes aligned
(actually, the manuals say it should be 16 byte aligned, so perhaps we should
also add this to the Linux setup.S?). SUS (the voyager BIOS equivalent)
reports that the CPU took a Trap 6 at FFF38466 in the boot sequence, but I
knew there wasn't an illegal instruction, and the memory address isn't in the
boot code. I suspect that the quad cards have some real mode instruction
emulation and that's where the trap is occuring.
Unfortunately, all the people at NCR who could explain what is going on have
long since departed, so I'm afraid I can only guess.
However, the general point that we should keep the boot sequence as simple as
possible (just in case we run across any other wierd quirks even in modern
PCs) still remains.
James
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Fri Aug 23 2002 - 22:00:13 EST