kernel panic while cd writing

From: Justyna Biała (nell@poczta.gazeta.pl)
Date: Sat Aug 17 2002 - 15:30:10 EST

Next message: Andrew Friedley: "RE: 2.4.20-pre3 hangs on boot on Duron/VIA"
Previous message: Alan Cox: "Re: Results with 2.4.20-pre2-ac3 and alim15x3 driver"
Next in thread: Markus Plail: "Re: kernel panic while cd writing"
Reply: Markus Plail: "Re: kernel panic while cd writing"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hi.

I have LiteOn 40x12x48x cd-writer, linux 2.4.19, cdrecord 1.11a24,
Duron 1000 MHz, ECS K7S5A with SIS735 chipset. My cd-writer works fine only
in two cases:
1. when the speed is not higher than 12x (no matter if the dma is on)
2. with speed = 32x but only when I turn the dma off with hdparm

In other cases after a few whiles from the begining of burning process
the whole system crashes whith such messages:

"unable to handle paging request at virtual address 199EC3F7"
"oops: 0002"
"kernel panic: aiee, killing interrupt handler!"

Can you give me any advices what should I do with that?

nell

-- 
Escape of the Unicorn
[free, 2D, flying shooter game]
http://eounicorn.sourceforge.net
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Next message: Andrew Friedley: "RE: 2.4.20-pre3 hangs on boot on Duron/VIA"
Previous message: Alan Cox: "Re: Results with 2.4.20-pre2-ac3 and alim15x3 driver"
Next in thread: Markus Plail: "Re: kernel panic while cd writing"
Reply: Markus Plail: "Re: kernel panic while cd writing"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

This archive was generated by hypermail 2b29 : Fri Aug 23 2002 - 22:00:14 EST