What type of RAID are you attempting to use?
-Brian
-----Original Message-----
From: Nagy Tibor [mailto:nagyt@otpbank.hu]
Sent: Wednesday, August 21, 2002 10:26 AM
To: linux-kernel@vger.kernel.org
Subject: Dell Perc 3/QC performance
Hi,
I am not satisfied with the disk I/O performance of the RAID controller
'Dell Perc 3/QC' (AMI megaraid) under Linux.
Short description of my problem:
We have a Dell PowerEdge 6600 + PERC 3/QC, and I am not satisfied with
the performance. I/O speed is not linearly growing if I read more disks
simultenausly. If I read 1 disk, I get about 49 MB/s read speed, if I
read 2 disks simultaneosly I get about 64 MB/s read speed (only
+15MB/s), if I read 3 disks simultaneosly I get about 68 MB/s read speed
(only +4MB/s), If I read more disk I don't get higher speed.
Do you have any idea, what is the problem?
Detailed description:
1. Configuration
Dell Poweredge 6600: 4 x 1400 MHz, 4 GB RAM
PERC 3/QC Firmware: 1.61N Bios: 3.17
Logical drive 0 (18 GB) - RAID 1 - Channel 0 Id 0 - 18 GB
\ Channel 0 Id 1 - 18 GB
Logical drive 1 (22 GB) - RAID 1 - Channel 2 Id 0 - 72 GB
Logical drive 2 (22 GB) + \ Channel 3 Id 9 - 72 GB
Logical drive 3 (24 GB) /
Logical drive 4 (22 GB) - RAID 1 - Channel 2 Id 1 - 72 GB
Logical drive 5 (22 GB) + \ Channel 3 Id 10 - 72 GB
Logical drive 6 (24 GB) /
Logical drive 7 (22 GB) - RAID 1 - Channel 2 Id 2 - 72 GB
Logical drive 8 (22 GB) + \ Channel 3 Id 11 - 72 GB
Logical drive 9 (24 GB) /
18 GB disks: Quantum ATLAS 10KIII 18 SCA (160 MB SCSI)
72 GB disks: Hitachi DK32DJ-72 (160 MB SCSI)
The 18 GB disks are installed in the server itself, the 72 GB disks are
installed in a PowerVault 221S disk tower with splitted backplane.
The 72 GB disks are splitted into 22-24 GB logical drives, because
Informix database engine can use max 2GB chunks (partitions), and only
15 partitions can be installed in linux on 1 drive.
'Cache policy' is set to 'Direct IO' and 'Read (ahead) policy' to
'adaptive' for all logical drives. (I tried other confugurations, too.)
Logical drives 1-9 are used as raw devices by informix, logical drive 0
is for the operating system.
2. Operating system
SuSe Linux 8.0, kernel 2.4.18
emiir:~ # uname -a
Linux emiir 2.4.18-64GB-SMP #1 SMP Wed Mar 27 13:58:12 UTC 2002 i686
unknown
3. I/O test
3.1 Read from Logical drive 1
dd if=/dev/rsdb1 of=/dev/null bs=1024k -> 49 MB/s I/O
3.2 Read from Logical drive 1 and 4 (different disks)
dd if=/dev/rsdb1 of=/dev/null bs=1024k &
dd if=/dev/rsde1 of=/dev/null bs=1024k & -> 64 MB/s I/O
3.2 Read from Logical drive 1, 4 and 7 (different disks)
dd if=/dev/rsdb1 of=/dev/null bs=1024k &
dd if=/dev/rsde1 of=/dev/null bs=1024k &
dd if=/dev/rsdh1 of=/dev/null bs=1024k & -> 68 MB/s I/O
All I/O speed came from the column 'bi' of 'vmstat 1'.
4. Result
I do not understand, why the speed is not increased nearly linearly. The
I/O between the PERC controller and the host is 64 bit PCI with 66MHz,
ca. 530MB/s, each of the four SCSI channel has a speed of 160MB/s. At
least test 3.2 should result the double of the speed of test 3.1 (two
SCSI channel, separate disks).
I see also on the dell site 300 MB/s for sequential read:
http://www.dell.com/us/en/biz/topics/power_ps1q02-perc.htm
Do you have any idea what can be wrong?
Than you
Tibor
------------------------------------------------------------------------
Tibor Nagy
National Savings and Commercial Bank Ltd (OTP Bank)
H-1051 Budapest Nador u. 16.
Tel: 00 36 1 374 6990 Fax: 00 36 1 374 6981 E-mail: nagyt@otpbank.hu
------------------------------------------------------------------------
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Fri Aug 23 2002 - 22:00:23 EST