The attached patch enables the usage of the ATI framebuffer for the ATI
Rage Mobility of my Gateway Solo 9300 Laptop. I did send this patch to
Geert Uytterhoeven in September 2001 but he doesn't seem interested.
There are, however, more people for which the standard atyfb doesn't
work (garbled display). These reports can be easily found using search
engines. I do hope that this patch enables atyfb for them.
It doesn't matter if this patch is never accepted, it was already
ignored for a year by the maintainer and in a few years the problematic
laptops will be dead anyway...
System info regarding ATI:
lspci output:
01:00.0 VGA compatible controller: ATI Technologies Inc Rage Mobility
P/M AGP 2x (rev 64)
System boot info:
atyfb: using auxiliary register aperture
atyfb: 3D RAGE Mobility (PCI) [0x4c4d rev 0x64] 8M SGRAM, 29.498928 MHz
XTAL, 23
5 MHz PLL, 63 Mhz MCLK
Console: switching to colour frame buffer device 128x48
fb0: ATY Mach64 frame buffer device on PCI
-- Andreas Steinmetz D.O.M. Datenverarbeitung GmbH
diff -rNu linux/drivers/video/aty/atyfb_base.c linux-custom/drivers/video/aty/atyfb_base.c --- linux/drivers/video/aty/atyfb_base.c 2002-08-03 02:39:45.000000000 +0200 +++ linux-custom/drivers/video/aty/atyfb_base.c 2002-09-05 15:13:11.000000000 +0200 @@ -359,7 +359,7 @@ { 0x4c50, 0x4c50, 0x00, 0x00, m64n_ltp_p, 230, 100, M64F_GT | M64F_INTEGRATED | M64F_RESET_3D | M64F_GTB_DSP }, /* 3D RAGE Mobility */ - { 0x4c4d, 0x4c4d, 0x00, 0x00, m64n_mob_p, 230, 50, M64F_GT | M64F_INTEGRATED | M64F_RESET_3D | M64F_GTB_DSP | M64F_MOBIL_BUS }, + { 0x4c4d, 0x4c4d, 0x00, 0x00, m64n_mob_p, 235, 63, M64F_GT | M64F_INTEGRATED | M64F_RESET_3D | M64F_GTB_DSP | M64F_MOBIL_BUS | M64F_XL_DLL }, { 0x4c4e, 0x4c4e, 0x00, 0x00, m64n_mob_a, 230, 50, M64F_GT | M64F_INTEGRATED | M64F_RESET_3D | M64F_GTB_DSP | M64F_MOBIL_BUS }, #endif /* CONFIG_FB_ATY_CT */ }; @@ -754,7 +754,10 @@ aty_set_crtc(info, &par->crtc); aty_st_8(CLOCK_CNTL + info->clk_wr_offset, 0, info); /* better call aty_StrobeClock ?? */ - aty_st_8(CLOCK_CNTL + info->clk_wr_offset, CLOCK_STROBE, info); + if (M64_HAS(MOBIL_BUS)&&M64_HAS(XL_DLL)) + aty_st_8(CLOCK_CNTL + info->clk_wr_offset, CLOCK_STROBE|CLOCK_SEL|CLOCK_DIV, info); + else + aty_st_8(CLOCK_CNTL + info->clk_wr_offset, CLOCK_STROBE, info); info->dac_ops->set_dac(info, &par->pll, par->crtc.bpp, accelmode); info->pll_ops->set_pll(info, &par->pll); diff -rNu linux/drivers/video/aty/mach64_ct.c linux-custom/drivers/video/aty/mach64_ct.c --- linux/drivers/video/aty/mach64_ct.c 2001-07-31 23:43:29.000000000 +0200 +++ linux-custom/drivers/video/aty/mach64_ct.c 2002-09-05 15:13:11.000000000 +0200 @@ -204,6 +204,11 @@ break; } + if (M64_HAS(MOBIL_BUS)&&M64_HAS(XL_DLL)) { + pll->pll_ext_cntl |= 0xc8; + pll->mclk_fb_div -= 1; + } + pll->pll_vclk_cntl = 0x03; /* VCLK = PLL_VCLK/VCLKx_POST */ pll->vclk_post_div = vpostdiv; } @@ -250,8 +255,10 @@ else aty_st_pll(DLL_CNTL, 0xa0, info); aty_st_pll(VFC_CNTL, 0x1b, info); - aty_st_le32(DSP_CONFIG, pll->ct.dsp_config, info); - aty_st_le32(DSP_ON_OFF, pll->ct.dsp_on_off, info); + if (!(M64_HAS(MOBIL_BUS)&&M64_HAS(XL_DLL))) { + aty_st_le32(DSP_CONFIG, pll->ct.dsp_config, info); + aty_st_le32(DSP_ON_OFF, pll->ct.dsp_on_off, info); + } } }
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sat Sep 07 2002 - 22:00:27 EST