Hi there,
I've tested 2.5.34 vanilla, also with Jens Axboe's new IDE patch (backport
from 2.4.20-pre5-ac4) and I am not able to set my HD to udma5 mode.
root@codeman:[/] # hdparm /dev/hda
/dev/hda:
multcount = 16 (on)
IO_support = 1 (32-bit)
unmaskirq = 0 (off)
using_dma = 1 (on)
keepsettings = 0 (off)
readonly = 0 (off)
readahead = 248 (on)
geometry = 7299/255/63, sectors = 117266688, start = 0
root@codeman:[/] # hdparm -i /dev/hda
/dev/hda:
Model=MAXTOR 6L060J3, FwRev=A93.0500, SerialNo=663219752652
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
RawCHS=16383/16/63, TrkSize=32256, SectSize=21298, ECCbytes=4
BuffType=DualPortCache, BuffSize=1819kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=117266688
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 *udma4 udma5 udma6
AdvancedPM=no WriteCache=enabled
Drive conforms to: ATA/ATAPI-5 T13 1321D revision 1: 1 2 3 4 5
root@codeman:[/] # hdparm -X69 /dev/hda
/dev/hda:
setting xfermode to 69 (UltraDMA mode5)
root@codeman:[/] # hdparm -i /dev/hda|grep udma
UDMA modes: udma0 udma1 udma2 udma3 *udma4 udma5 udma6
the only thing I see in my dmesg (only with 2.4 ide backport) is:
ide_intr: woops
Nothing else, no errors. UDMA mode 5 works perfect with 2.4.18/2.4.19.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes
ICH: IDE controller at PCI slot 00:1f.1
ICH: chipset revision 2
ICH: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:DMA
If you need more info's, other debugging etc. let me know!!
TIA!
--
Kind regards
Marc-Christian Petersen
http://sourceforge.net/projects/wolk
PGP/GnuPG Key: 1024D/569DE2E3DB441A16
Fingerprint: 3469 0CF8 CA7E 0042 7824 080A 569D E2E3 DB44 1A16
Key available at www.keyserver.net. Encrypted e-mail preferred.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sun Sep 15 2002 - 22:00:24 EST