Asus TUSL2-C mobo
ide: Assuming 33MHz system bus speed for PIO modes; override
with idebus=xx
ICH2: IDE controller at PCI slot 00:1f.1
ICH2: chipset revision 2
ICH2: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x9800-0x9807, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x9808-0x980f, BIOS settings: hdc:DMA, hdd:pio
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
ide2 at 0xb800-0xb807,0xb402 on irq 9
ide3 at 0xb000-0xb007,0xa802 on irq 9
# cat /proc/interrupts
CPU0
0: 185641 XT-PIC timer
1: 3426 XT-PIC keyboard
2: 0 XT-PIC cascade
8: 0 XT-PIC rtc
9: 266188 XT-PIC ide2, ide3, eth0
14: 229633 XT-PIC ide0
15: 229618 XT-PIC ide1
NMI: 0
ERR: 0
On heavy ide1 usage (disk present only on the primar
channel) I'm getting
spurious 8259A interrupt: IRQ15.
messages all the time.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Mon Sep 30 2002 - 22:00:39 EST