# This is a BitKeeper generated patch for the following project:
# Project Name: Linux kernel tree
# This patch format is intended for GNU patch command version 2.5 or higher.
# This patch includes the following deltas:
# ChangeSet 1.573.92.13 -> 1.573.92.14
# drivers/usb/misc/usbtest.c 1.1 -> 1.2
#
# The following is the BitKeeper ChangeSet Log
# --------------------------------------------
# 02/10/07 david-b@pacbell.net 1.573.92.14
# [PATCH] usbtest: mo'betta devices, control tests
#
# This updates the usbtest driver:
#
# - Supports more devices for the basic i/o tests,
# using full speed ez-usb firmware (and usbtest
# tweaks!) provided by Martin Diehl.
#
# - Adds another test case, which issues control
# messages to devices. There will be further
# updates in this area (control queueing, and
# likely improving usbcore api coverage).
#
# - Adds a "generic device" mode where vendor
# (and optionally product) ids can be given as
# module parameters. Those devices can be used
# for testing control traffic.
# --------------------------------------------
#
diff -Nru a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c
--- a/drivers/usb/misc/usbtest.c Tue Oct 8 15:53:50 2002
+++ b/drivers/usb/misc/usbtest.c Tue Oct 8 15:53:50 2002
@@ -5,7 +5,6 @@
#include <linux/slab.h>
#include <linux/mm.h>
#include <linux/module.h>
-//#include <linux/time.h>
#include <asm/scatterlist.h>
#if !defined (DEBUG) && defined (CONFIG_USB_DEBUG)
@@ -33,21 +32,43 @@
/*-------------------------------------------------------------------------*/
+#define GENERIC /* let probe() bind using module params */
+
+/* Some devices that can be used for testing will have "real" drivers.
+ * Entries for those need to be enabled here by hand, after disabling
+ * that "real" driver.
+ */
+//#define IBOT2 /* grab iBOT2 webcams */
+//#define KEYSPAN_19Qi /* grab un-renumerated serial adapter */
+
+/*-------------------------------------------------------------------------*/
+
+struct usbtest_info {
+ const char *name;
+ u8 ep_in; /* bulk/intr source */
+ u8 ep_out; /* bulk/intr sink */
+ int alt;
+};
+
/* this is accessed only through usbfs ioctl calls.
* one ioctl to issue a test ... no locking needed!!!
* tests create other threads if they need them.
* urbs and buffers are allocated dynamically,
* and data generated deterministically.
*
- * there's a minor complication on disconnect(), since
+ * there's a minor complication on rmmod, since
* usbfs.disconnect() waits till our ioctl completes.
+ * unplug works fine since we'll see real i/o errors.
*/
struct usbtest_dev {
struct usb_interface *intf;
- struct testdev_info *info;
+ struct usbtest_info *info;
char id [32];
int in_pipe;
int out_pipe;
+
+#define TBUF_SIZE 256
+ u8 *buf;
};
static struct usb_device *testdev_to_usbdev (struct usbtest_dev *test)
@@ -90,6 +111,8 @@
? (INTERRUPT_RATE << 3)
: INTERRUPT_RATE,
urb->transfer_flags = URB_NO_DMA_MAP;
+ if (usb_pipein (pipe))
+ urb->transfer_flags |= URB_SHORT_NOT_OK;
urb->transfer_buffer = usb_buffer_alloc (udev, bytes, SLAB_KERNEL,
&urb->transfer_dma);
if (!urb->transfer_buffer) {
@@ -247,6 +270,279 @@
/*-------------------------------------------------------------------------*/
+/* unqueued control message testing
+ *
+ * there's a nice set of device functional requirements in chapter 9 of the
+ * usb 2.0 spec, which we can apply to ANY device, even ones that don't use
+ * special test firmware.
+ *
+ * we know the device is configured (or suspended) by the time it's visible
+ * through usbfs. we can't change that, so we won't test enumeration (which
+ * worked 'well enough' to get here, this time), power management (ditto),
+ * or remote wakeup (which needs human interaction).
+ */
+
+static int get_altsetting (struct usbtest_dev *dev)
+{
+ struct usb_interface *iface = dev->intf;
+ struct usb_device *udev = interface_to_usbdev (iface);
+ int retval;
+
+ retval = usb_control_msg (udev, usb_rcvctrlpipe (udev, 0),
+ USB_REQ_GET_INTERFACE, USB_DIR_IN|USB_RECIP_INTERFACE,
+ 0, iface->altsetting [0].bInterfaceNumber,
+ dev->buf, 1, HZ * USB_CTRL_GET_TIMEOUT);
+ switch (retval) {
+ case 1:
+ return dev->buf [0];
+ case 0:
+ retval = -ERANGE;
+ // FALLTHROUGH
+ default:
+ return retval;
+ }
+}
+
+/* this is usb_set_interface(), with no 'only one altsetting' case */
+static int set_altsetting (struct usbtest_dev *dev, int alternate)
+{
+ struct usb_interface *iface = dev->intf;
+ struct usb_device *udev;
+ struct usb_interface_descriptor *iface_as;
+ int i, ret;
+
+ if (alternate < 0 || alternate >= iface->num_altsetting)
+ return -EINVAL;
+
+ udev = interface_to_usbdev (iface);
+ if ((ret = usb_control_msg (udev, usb_sndctrlpipe (udev, 0),
+ USB_REQ_SET_INTERFACE, USB_RECIP_INTERFACE,
+ iface->altsetting [alternate].bAlternateSetting,
+ iface->altsetting [alternate].bInterfaceNumber,
+ NULL, 0, HZ * USB_CTRL_SET_TIMEOUT)) < 0)
+ return ret;
+
+ // FIXME usbcore should be more like this:
+ // - remove that special casing in usbcore.
+ // - fix usbcore signature to take interface
+
+ /* prevent requests using previous endpoint settings */
+ iface_as = iface->altsetting + iface->act_altsetting;
+ for (i = 0; i < iface_as->bNumEndpoints; i++) {
+ u8 ep = iface_as->endpoint [i].bEndpointAddress;
+ int out = !(ep & USB_DIR_IN);
+
+ ep &= USB_ENDPOINT_NUMBER_MASK;
+ (out ? udev->epmaxpacketout : udev->epmaxpacketin ) [ep] = 0;
+ // FIXME want hcd hook here, "forget this endpoint"
+ }
+ iface->act_altsetting = alternate;
+
+ /* reset toggles and maxpacket for all endpoints affected */
+ iface_as = iface->altsetting + iface->act_altsetting;
+ for (i = 0; i < iface_as->bNumEndpoints; i++) {
+ u8 ep = iface_as->endpoint [i].bEndpointAddress;
+ int out = !(ep & USB_DIR_IN);
+
+ ep &= USB_ENDPOINT_NUMBER_MASK;
+ usb_settoggle (udev, ep, out, 0);
+ (out ? udev->epmaxpacketout : udev->epmaxpacketin ) [ep]
+ = iface_as->endpoint [ep].wMaxPacketSize;
+ }
+
+ return 0;
+}
+
+static int is_good_config (char *buf, int len)
+{
+ struct usb_config_descriptor *config;
+
+ if (len < sizeof *config)
+ return 0;
+ config = (struct usb_config_descriptor *) buf;
+
+ switch (config->bDescriptorType) {
+ case USB_DT_CONFIG:
+ case USB_DT_OTHER_SPEED_CONFIG:
+ if (config->bLength != 9)
+ return 0;
+#if 0
+ /* this bit 'must be 1' but often isn't */
+ if (!(config->bmAttributes & 0x80)) {
+ dbg ("high bit of config attributes not set");
+ return 0;
+ }
+#endif
+ if (config->bmAttributes & 0x1f) /* reserved == 0 */
+ return 0;
+ break;
+ default:
+ return 0;
+ }
+
+ le32_to_cpus (&config->wTotalLength);
+ if (config->wTotalLength == len) /* read it all */
+ return 1;
+ return config->wTotalLength >= TBUF_SIZE; /* max partial read */
+}
+
+/* sanity test for standard requests working with usb_control_mesg() and some
+ * of the utility functions which use it.
+ *
+ * this doesn't test how endpoint halts behave or data toggles get set, since
+ * we won't do I/O to bulk/interrupt endpoints here (which is how to change
+ * halt or toggle). toggle testing is impractical without support from hcds.
+ *
+ * this avoids failing devices linux would normally work with, by not testing
+ * config/altsetting operations for devices that only support their defaults.
+ * such devices rarely support those needless operations.
+ *
+ * NOTE that since this is a sanity test, it's not examining boundary cases
+ * to see if usbcore, hcd, and device all behave right. such testing would
+ * involve varied read sizes and other operation sequences.
+ */
+static int ch9_postconfig (struct usbtest_dev *dev)
+{
+ struct usb_interface *iface = dev->intf;
+ struct usb_device *udev = interface_to_usbdev (iface);
+ int i, retval;
+
+ /* [9.2.3] if there's more than one altsetting, we need to be able to
+ * set and get each one. mostly trusts the descriptors from usbcore.
+ */
+ for (i = 0; i < iface->num_altsetting; i++) {
+
+ /* 9.2.3 constrains the range here, and Linux ensures
+ * they're ordered meaningfully in this array
+ */
+ if (iface->altsetting [i].bAlternateSetting != i) {
+ dbg ("%s, illegal alt [%d].bAltSetting = %d",
+ dev->id, i,
+ iface->altsetting [i]
+ .bAlternateSetting);
+ return -EDOM;
+ }
+
+ /* [real world] get/set unimplemented if there's only one */
+ if (iface->num_altsetting == 1)
+ continue;
+
+ /* [9.4.10] set_interface */
+ retval = set_altsetting (dev, i);
+ if (retval) {
+ dbg ("%s can't set_interface = %d, %d",
+ dev->id, i, retval);
+ return retval;
+ }
+
+ /* [9.4.4] get_interface always works */
+ retval = get_altsetting (dev);
+ if (retval != i) {
+ dbg ("%s get alt should be %d, was %d",
+ dev->id, i, retval);
+ return (retval < 0) ? retval : -EDOM;
+ }
+
+ }
+
+ /* [real world] get_config unimplemented if there's only one */
+ if (udev->descriptor.bNumConfigurations != 1) {
+ int expected = udev->actconfig->bConfigurationValue;
+
+ /* [9.4.2] get_configuration always works */
+ retval = usb_control_msg (udev, usb_rcvctrlpipe (udev, 0),
+ USB_REQ_GET_CONFIGURATION, USB_RECIP_DEVICE,
+ 0, 0, dev->buf, 1, HZ * USB_CTRL_GET_TIMEOUT);
+ if (retval != 1 || dev->buf [0] != expected) {
+ dbg ("%s get config --> %d (%d)", dev->id, retval,
+ expected);
+ return (retval < 0) ? retval : -EDOM;
+ }
+ }
+
+ /* there's always [9.4.3] a device descriptor [9.6.1] */
+ retval = usb_get_descriptor (udev, USB_DT_DEVICE, 0,
+ dev->buf, sizeof udev->descriptor);
+ if (retval != sizeof udev->descriptor) {
+ dbg ("%s dev descriptor --> %d", dev->id, retval);
+ return (retval < 0) ? retval : -EDOM;
+ }
+
+ /* there's always [9.4.3] at least one config descriptor [9.6.3] */
+ for (i = 0; i < udev->descriptor.bNumConfigurations; i++) {
+ retval = usb_get_descriptor (udev, USB_DT_CONFIG, i,
+ dev->buf, TBUF_SIZE);
+ if (!is_good_config (dev->buf, retval)) {
+ dbg ("%s config [%d] descriptor --> %d",
+ dev->id, i, retval);
+ return (retval < 0) ? retval : -EDOM;
+ }
+
+ // FIXME cross-checking udev->config[i] to make sure usbcore
+ // parsed it right (etc) would be good testing paranoia
+ }
+
+ /* and sometimes [9.2.6.6] speed dependent descriptors */
+ if (udev->descriptor.bcdUSB == 0x0200) { /* pre-swapped */
+ struct usb_qualifier_descriptor *d = 0;
+
+ /* device qualifier [9.6.2] */
+ retval = usb_get_descriptor (udev,
+ USB_DT_DEVICE_QUALIFIER, 0, dev->buf,
+ sizeof (struct usb_qualifier_descriptor));
+ if (retval == -EPIPE) {
+ if (udev->speed == USB_SPEED_HIGH) {
+ dbg ("%s hs dev qualifier --> %d",
+ dev->id, retval);
+ return (retval < 0) ? retval : -EDOM;
+ }
+ /* usb2.0 but not high-speed capable; fine */
+ } else if (retval != sizeof (struct usb_qualifier_descriptor)) {
+ dbg ("%s dev qualifier --> %d", dev->id, retval);
+ return (retval < 0) ? retval : -EDOM;
+ } else
+ d = (struct usb_qualifier_descriptor *) dev->buf;
+
+ /* might not have [9.6.2] any other-speed configs [9.6.4] */
+ if (d) {
+ unsigned max = d->bNumConfigurations;
+ for (i = 0; i < max; i++) {
+ retval = usb_get_descriptor (udev,
+ USB_DT_OTHER_SPEED_CONFIG, i,
+ dev->buf, TBUF_SIZE);
+ if (!is_good_config (dev->buf, retval)) {
+ dbg ("%s other speed config --> %d",
+ dev->id, retval);
+ return (retval < 0) ? retval : -EDOM;
+ }
+ }
+ }
+ }
+ // FIXME fetch strings from at least the device descriptor
+
+ /* [9.4.5] get_status always works */
+ retval = usb_get_status (udev, USB_RECIP_DEVICE, 0, dev->buf);
+ if (retval != 2) {
+ dbg ("%s get dev status --> %d", dev->id, retval);
+ return (retval < 0) ? retval : -EDOM;
+ }
+
+ // FIXME configuration.bmAttributes says if we could try to set/clear
+ // the device's remote wakeup feature ... if we can, test that here
+
+ retval = usb_get_status (udev, USB_RECIP_INTERFACE,
+ iface->altsetting [0].bInterfaceNumber, dev->buf);
+ if (retval != 2) {
+ dbg ("%s get interface status --> %d", dev->id, retval);
+ return (retval < 0) ? retval : -EDOM;
+ }
+ // FIXME get status for each endpoint in the interface
+
+ return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
/* We only have this one interface to user space, through usbfs.
* User mode code can scan usbfs to find N different devices (maybe on
* different busses) to use when testing, and allocate one thread per
@@ -270,6 +566,7 @@
struct scatterlist *sg;
struct usb_sg_request req;
struct timeval start;
+ unsigned i;
// FIXME USBDEVFS_CONNECTINFO doesn't say how fast the device is.
@@ -280,6 +577,23 @@
|| param->sglen < 0 || param->vary < 0)
return -EINVAL;
+ /* some devices, like ez-usb default devices, need a non-default
+ * altsetting to have any active endpoints. some tests change
+ * altsettings; force a default so most tests don't need to check.
+ */
+ if (dev->info->alt >= 0) {
+ int res;
+
+ if (intf->altsetting->bInterfaceNumber)
+ return -ENODEV;
+ res = set_altsetting (dev, dev->info->alt);
+ if (res) {
+ err ("%s: set altsetting to %d failed, %d",
+ dev->id, dev->info->alt, res);
+ return res;
+ }
+ }
+
/*
* Just a bunch of test cases that every HCD is expected to handle.
*
@@ -287,7 +601,7 @@
* one firmware image to handle all the test cases.
*
* FIXME add more tests! cancel requests, verify the data, control
- * requests, and so on.
+ * queueing, concurrent read+write threads, and so on.
*/
do_gettimeofday (&start);
switch (param->test_num) {
@@ -343,7 +657,7 @@
case 4:
if (dev->in_pipe == 0 || param->vary == 0)
break;
- dbg ("%s TEST 3: read/%d 0..%d bytes %u times", dev->id,
+ dbg ("%s TEST 4: read/%d 0..%d bytes %u times", dev->id,
param->vary, param->length, param->iterations);
urb = simple_alloc_urb (udev, dev->out_pipe, param->length);
if (!urb) {
@@ -422,6 +736,17 @@
free_sglist (sg, param->sglen);
break;
+ /* non-queued sanity tests for control (chapter 9 subset) */
+ case 9:
+ retval = 0;
+ dbg ("%s TEST 9: ch9 (subset) control tests, %d times",
+ dev->id, param->iterations);
+ for (i = param->iterations; retval == 0 && i--; /* NOP */)
+ retval = ch9_postconfig (dev);
+ if (retval)
+ dbg ("ch9 subset failed, iterations left %d", i);
+ break;
+
/* test cases for the unlink/cancel codepaths need a thread to
* usb_unlink_urb() or usg_sg_cancel(), and a way to check if
* the urb/sg_request was properly canceled.
@@ -443,48 +768,77 @@
/*-------------------------------------------------------------------------*/
-/* most programmable USB devices can be given firmware that will support the
- * test cases above. one basic question is which endpoints to use for
- * testing; endpoint numbers are not always firmware-selectable.
- *
- * for now, the driver_info in the device_id table entry just encodes the
- * endpoint info for a pair of bulk-capable endpoints, which we can use
- * for some interrupt transfer tests too. later this could get fancier.
- */
-#define EP_PAIR(in,out) (((in)<<4)|(out))
-
static int force_interrupt = 0;
MODULE_PARM (force_interrupt, "i");
MODULE_PARM_DESC (force_interrupt, "0 = test bulk (default), else interrupt");
+#ifdef GENERIC
+static int vendor;
+MODULE_PARM (vendor, "h");
+MODULE_PARM_DESC (vendor, "vendor code (from usb-if)");
+
+static int product;
+MODULE_PARM (product, "h");
+MODULE_PARM_DESC (product, "product code (from vendor)");
+#endif
+
static int
usbtest_probe (struct usb_interface *intf, const struct usb_device_id *id)
{
struct usb_device *udev;
struct usbtest_dev *dev;
- unsigned long driver_info = id->driver_info;
+ struct usbtest_info *info;
+ char *rtest, *wtest;
udev = interface_to_usbdev (intf);
+#ifdef GENERIC
+ /* specify devices by module parameters? */
+ if (id->match_flags == 0) {
+ /* vendor match required, product match optional */
+ if (!vendor || udev->descriptor.idVendor != (u16)vendor)
+ return -ENODEV;
+ if (product && udev->descriptor.idProduct != (u16)product)
+ return -ENODEV;
+ dbg ("matched module params, vend=0x%04x prod=0x%04x",
+ udev->descriptor.idVendor,
+ udev->descriptor.idProduct);
+ }
+#endif
+
dev = kmalloc (sizeof *dev, SLAB_KERNEL);
if (!dev)
return -ENOMEM;
memset (dev, 0, sizeof *dev);
- snprintf (dev->id, sizeof dev->id, "%s-%s",
- udev->bus->bus_name, udev->devpath);
+ info = (struct usbtest_info *) id->driver_info;
+ dev->info = info;
+
+ /* use the same kind of id the hid driver shows */
+ snprintf (dev->id, sizeof dev->id, "%s-%s:%d",
+ udev->bus->bus_name, udev->devpath,
+ intf->altsetting [0].bInterfaceNumber);
dev->intf = intf;
+ /* cacheline-aligned scratch for i/o */
+ if ((dev->buf = kmalloc (TBUF_SIZE, SLAB_KERNEL)) == 0) {
+ kfree (dev);
+ return -ENOMEM;
+ }
+
/* NOTE this doesn't yet test the handful of difference that are
- * visible with high speed devices: bigger maxpacket (1K) and
+ * visible with high speed interrupts: bigger maxpacket (1K) and
* "high bandwidth" modes (up to 3 packets/uframe).
*/
+ rtest = wtest = "";
if (force_interrupt || udev->speed == USB_SPEED_LOW) {
- if (driver_info & 0xf0)
- dev->in_pipe = usb_rcvintpipe (udev,
- (driver_info >> 4) & 0x0f);
- if (driver_info & 0x0f)
- dev->out_pipe = usb_sndintpipe (udev,
- driver_info & 0x0f);
+ if (info->ep_in) {
+ dev->in_pipe = usb_rcvintpipe (udev, info->ep_in);
+ rtest = " intr-in";
+ }
+ if (info->ep_out) {
+ dev->out_pipe = usb_sndintpipe (udev, info->ep_out);
+ wtest = " intr-out";
+ }
#if 1
// FIXME disabling this until we finally get rid of
@@ -494,18 +848,26 @@
return -ENODEV;
#endif
} else {
- if (driver_info & 0xf0)
- dev->in_pipe = usb_rcvbulkpipe (udev,
- (driver_info >> 4) & 0x0f);
- if (driver_info & 0x0f)
- dev->out_pipe = usb_sndbulkpipe (udev,
- driver_info & 0x0f);
+ if (info->ep_in) {
+ dev->in_pipe = usb_rcvbulkpipe (udev, info->ep_in);
+ rtest = " bulk-in";
+ }
+ if (info->ep_out) {
+ dev->out_pipe = usb_sndbulkpipe (udev, info->ep_out);
+ wtest = " bulk-out";
+ }
}
dev_set_drvdata (&intf->dev, dev);
- info ("bound to %s ...%s%s", dev->id,
- dev->out_pipe ? " writes" : "",
- dev->in_pipe ? " reads" : "");
+ info ("%s at %s ... %s speed {control%s%s} tests",
+ info->name, dev->id,
+ ({ char *tmp;
+ switch (udev->speed) {
+ case USB_SPEED_LOW: tmp = "low"; break;
+ case USB_SPEED_FULL: tmp = "full"; break;
+ case USB_SPEED_HIGH: tmp = "high"; break;
+ default: tmp = "unknown"; break;
+ }; tmp; }), rtest, wtest);
return 0;
}
@@ -519,24 +881,113 @@
}
/* Basic testing only needs a device that can source or sink bulk traffic.
+ * Any device can test control transfers (default with GENERIC binding).
+ *
+ * Several entries work with the default EP0 implementation that's built
+ * into EZ-USB chips. There's a default vendor ID which can be overridden
+ * by (very) small config EEPROMS, but otherwise all these devices act
+ * identically until firmware is loaded: only EP0 works. It turns out
+ * to be easy to make other endpoints work, without modifying that EP0
+ * behavior. For now, we expect that kind of firmware.
*/
+
+/* an21xx or fx versions of ez-usb */
+static struct usbtest_info ez1_info = {
+ .name = "EZ-USB device",
+ .ep_in = 2,
+ .ep_out = 2,
+ .alt = 1,
+};
+
+/* fx2 version of ez-usb */
+static struct usbtest_info ez2_info = {
+ .name = "FX2 device",
+ .ep_in = 6,
+ .ep_out = 2,
+ .alt = 1,
+};
+
+#ifdef IBOT2
+/* this is a nice source of high speed bulk data;
+ * uses an FX2, with firmware provided in the device
+ */
+static struct usbtest_info ibot2_info = {
+ .name = "iBOT2 webcam",
+ .ep_in = 2,
+ .alt = -1,
+};
+#endif
+
+#ifdef GENERIC
+/* we can use any device to test control traffic */
+static struct usbtest_info generic_info = {
+ .name = "Generic USB device",
+ .alt = -1,
+};
+#endif
+
+// FIXME remove this
+static struct usbtest_info hact_info = {
+ .name = "FX2/hact",
+ //.ep_in = 6,
+ .ep_out = 2,
+ .alt = -1,
+};
+
+
static struct usb_device_id id_table [] = {
- /* EZ-USB FX2 "bulksrc" or "bulkloop" firmware from Cypress
- * reads disabled on this one, my version has some problem there
- */
{ USB_DEVICE (0x0547, 0x1002),
- .driver_info = EP_PAIR (0, 2),
+ .driver_info = (unsigned long) &hact_info,
},
-#if 1
+
+ /*-------------------------------------------------------------*/
+
+ /* EZ-USB devices which download firmware to replace (or in our
+ * case augment) the default device implementation.
+ */
+
+ /* generic EZ-USB FX controller */
+ { USB_DEVICE (0x0547, 0x2235),
+ .driver_info = (unsigned long) &ez1_info,
+ },
+
+ /* CY3671 development board with EZ-USB FX */
+ { USB_DEVICE (0x0547, 0x0080),
+ .driver_info = (unsigned long) &ez1_info,
+ },
+
+ /* generic EZ-USB FX2 controller (or development board) */
+ { USB_DEVICE (0x04b4, 0x8613),
+ .driver_info = (unsigned long) &ez2_info,
+ },
+
+#ifdef KEYSPAN_19Qi
+ /* Keyspan 19qi uses an21xx (original EZ-USB) */
+ // this does not coexist with the real Keyspan 19qi driver!
+ { USB_DEVICE (0x06cd, 0x010b),
+ .driver_info = (unsigned long) &ez1_info,
+ },
+#endif
+
+ /*-------------------------------------------------------------*/
+
+#ifdef IBOT2
+ /* iBOT2 makes a nice source of high speed bulk-in data */
// this does not coexist with a real iBOT2 driver!
- // it makes a nice source of high speed bulk-in data
{ USB_DEVICE (0x0b62, 0x0059),
- .driver_info = EP_PAIR (2, 0),
+ .driver_info = (unsigned long) &ibot2_info,
},
#endif
- /* can that old "usbstress-0.3" firmware be used with this? */
+ /*-------------------------------------------------------------*/
+
+#ifdef GENERIC
+ /* module params can specify devices to use for control tests */
+ { .driver_info = (unsigned long) &generic_info, },
+#endif
+
+ /*-------------------------------------------------------------*/
{ }
};
@@ -555,6 +1006,10 @@
static int __init usbtest_init (void)
{
+#ifdef GENERIC
+ if (vendor)
+ dbg ("params: vend=0x%04x prod=0x%04x", vendor, product);
+#endif
return usb_register (&usbtest_driver);
}
module_init (usbtest_init);
@@ -565,6 +1020,6 @@
}
module_exit (usbtest_exit);
-MODULE_DESCRIPTION ("USB HCD Testing Driver");
+MODULE_DESCRIPTION ("USB Core/HCD Testing Driver");
MODULE_LICENSE ("GPL");
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Tue Oct 15 2002 - 22:00:29 EST